I have tried to reproduce your problem on the HS7429_USB. What I find strange is that uImage is read completely but that it does not start its built-in rcS:
I have found that the USB stick is very, very critical with these bozes; I tried more than ten, only one would work. Maybe you should try another stick?Code:Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found 3727530 uimage -> the size is the same 134217728 root.img -> size is the same 2 file(s), 0 dir(s) reading uImage ................................................................................ ................................................................................ ................................................................................ ................................................................................ ............................................ ret=> 3727530 --={ Load Enigma2 from USB }=-- -> I do not see this one in your log, this is the start of the built-in rcS [init] Wait until /dev/sda exists [init] ...found, mounting /dev/sda1 -> root.img is found [init] Check root.img enigma2: clean, 6030/32768 files, 124204/131072 blocks [init] Mount root.img [init] Start Enigma2 INIT: version 2.88 booting -> start of the rcS in the root.img Fortis HS7429 Enigma2 [rcS] Init frontpanel [rcS] WAIT 1 minute [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev [rcS] Starting automounter Starting automounter: /media/usb. [rcS] Starting DEBUG Interface [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp /var/run /var/lock. Hostname: hs7429. [rcS] Starting telnetd with autologin [rcS] Init stmfb (LOAD 9) [rcS] Loading modules [rcS] Load audio firmware (LOAD 8) [rcS] Load video firmware (LOAD 7) [rcS] Init embx (LOAD 6) [rcS] Init AVS (LOAD 5) [rcS] Init player 191 (LOAD 4) [rcS] Init frontend [rcS] Init CI & cardreader [rcS] Full feature pti [rcS] Init player2 (LOAD 3) [rcS] Init HDMI-CEC [rcS] Init remote control (LOAD 2) [evremote2] Model: 'hs7429' [evremote2] vBoxType: 8 (hs7429) [evremote2] Input device name: "TDT RC event driver" [evremote2] Remote selected: Fortis RemoteControl [evremote2] RemoteControl Map: Keyname Keyword KeyCode -------------------------------------- MENU - 04 - 139 RED - 4B - 398 GREEN - 4A - 399 YELLOW - 49 - 400 BLUE - 48 - 401 EXIT - 1C - 102 TEXT - 0D - 388 EPG - 08 - 365 REWIND - 58 - 168 FASTFORWARD - 5C - 208 PLAY - 55 - 207 PAUSE - 07 - 119 RECORD - 56 - 167 STOP - 54 - 128 STANDBY - 0A - 116 MUTE - 0C - 113 CHANNELUP - 5E - 104 CHANNELDOWN - 5F - 109 VOLUMEUP - 4E - 115 VOLUMEDOWN - 4F - 114 INFO - 06 - 358 OK - 1F - 352 UP - 00 - 103 RIGHT - 02 - 106 DOWN - 01 - 108 LEFT - 03 - 105 RECALL - 09 - 138 ZOOM - 53 - 372 VFORMAT - 0E - 371 RESOLUTION - 0F - 375 TVRADIO - 1A - 373 SLEEP - 1E - 409 OPEN - 40 - 394 FAV - 41 - 364 CHECK - 42 - 353 UPUP - 43 - 414 DOWNDOWN - 44 - 415 NEXT - 4C - 407 LAST - 50 - 412 PIP - 51 - 357 SWAP - 52 - 354 LIST - 0B - 370 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 -------------------------------------- [evremote2] Frontpanel Map: Keyname Keyword KeyCode -------------------------------------- STANDBY - 00 - 116 OK - 06 - 352 MENU - 05 - 139 VOLUMEUP - 03 - 115 VOLUMEDOWN - 04 - 114 CHANNELUP - 01 - 104 CHANNELDOWN - 02 - 109 -------------------------------------- [evremote2] Supports Long KeyPress: yes [evremote2 fortis] Period = 10, delay = 140 [evremote2] Using period = 10 delay = 140 [showiframe] showSinglePic /boot/bootlogo.mvi [showiframe] VIDEO_SELECT_SOURCE MEMORY (Success) [showiframe] VIDEO_PLAY (Success) [showiframe] VIDEO_CONTINUE: (Success) [showiframe] VIDEO_CLEAR_BUFFER: (Invalid argument) Deconfiguring network interfaces... ifdown: interface lo not configured ifdown: interface eth0 not configured ifdown: interface eth1 not configured ifdown: interface wlan0 not configured done. [rcS] Starting DHCP Starting DHCP client: udhcpcudhcpc: started, v1.29.3 udhcpc: sending discover udhcpc: sending select for 192.168.178.124 udhcpc: lease of 192.168.178.124 obtained, lease time 864000 route: SIOCDELRT: No such process adding dns 192.168.178.1 . Setting up IP spoofing protection: rp_filter. Configuring network interfaces... udhcpc: started, v1.29.3 udhcpc: sending discover udhcpc: sending select for 192.168.178.124 udhcpc: lease of 192.168.178.124 obtained, lease time 864000 route: SIOCDELRT: No such process adding dns 192.168.178.1 ip: SIOCGIFFLAGS: No such device ip: SIOCGIFFLAGS: No such device done. [rcS] Init WLAN: None. [rcS] No inadyn [rcS] No OpenSSH [rcS] Set internet time ntpd: setting time to 2019-02-16 13:54:37.260939 (offset +603636850.492527s) Current system time: 13:54:37 16-02-2019 (local) Front panel time set to: 13:54:37 16-02-2019 (local) Note: /proc/stb/fp/rtc_offset set to: +3600 seconds. [rcS] Init portmap & ftp (LOAD 1) Starting portmap daemon.... Starting FTP server: vsftpd. [rcS] Loading E2 [rcS] Entering e2 main loop PYTHONPATH: /usr/lib/enigma2/python -> 1st enigma2 message DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA_DEBUG_LVL=4 [Avahi] Not running yet, cannot browse for type _e2stream._tcp. [eInit] + (1) Background File Eraser [eInit] + (5) Tuxtxt [eInit] + (8) graphics acceleration manager STMFB accel interface available [eInit] + (9) GFBDC
Regards,
Audioniek.
- - - Aktualisiert - - -
Hello spartak73,
On my testbox I have the same problem, even with the hard disk formatted in ext3. I assumed it was a particular problem of that box, but apparently it is generic. It is not the kernel-config, jfs is enabled because Fortis firmware formats in jfs by default and Fortis recordings are playable by E2:
Will investigate further.Code:# # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_EXT4_FS=y CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set CONFIG_JFS_FS=y # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_SECURITY is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y
Regards,
Audioniek.