+ Antworten
Seite 3 von 3 ErsteErste 123
Ergebnis 21 bis 29 von 29
  1. #21
    Erfahrener Benutzer Avatar von spartak73
    Registriert seit
    06.05.2012
    Ort
    Lattitude 51,292°N Lonitude 9,452°E
    Beiträge
    232
    Thanks
    123
    Thanked 64 Times in 38 Posts
    Hallo! Thanks for the work you've done. I installed the USB image for atevio 7500 (.tar.gz), the image booted and working. Image for hs7429 (usb version) is not booted. Log attached ...

    Code:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.02.15 22:37:23 =~=~=~=~=~=~=~=~=~=~=~=
      FrTs
     '1 (Re)start USB...
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
                system volume information/
     134217728   root.img 
      3727530   uimage 
                $recycle.bin/
                ./
                ../
           12   wpsettings.dat 
           76   indexervolumeguid 
    
    4 file(s), 4 dir(s)
    
    reading uImage
    ............................................................................................................................................................................................................................................................................................................................................................................
    ret=> 3727530
        FrTs
     '1 (Re)start USB...
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
                system volume information/
     134217728   root.img 
      3727530   uimage 
                $recycle.bin/
                ./
                ../
           12   wpsettings.dat 
           76   indexervolumeguid 
    
    4 file(s), 4 dir(s)
    
    reading uImage
    ............................................................................................................................................................................................................................................................................................................................................................................
    ret=> 3727530
    hs7429.log
    Vu+ Duo², Formuler F3, Octagon 1028P, PrismCube Ruby, Openbox S6,S4, Skyway Classic3, Droid2
    Loader: I-Boot SW: V21218 Enigma2: MAX-TDT by spartak73, HDMU mod, PKT Hyperion v5.2 mod
    Toroidal T-90 5°W---45°E
    Sony KDL-55W955B

  2. The Following User Says Thank You to spartak73 For This Useful Post:



  3. #22
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    434
    Thanks
    114
    Thanked 452 Times in 194 Posts
    HS7429 USB : I will give it a test and if anything changes, I will upload an improved image.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark Triplex, Amiko Alien 3, Sogno Spark Revolution, Topfield TF7710HDPVR, Kathrein UFS912, Vizyon revolution 820HD PVR
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  4. The Following User Says Thank You to Audioniek For This Useful Post:



  5. #23
    Erfahrener Benutzer
    Registriert seit
    12.07.2012
    Beiträge
    135
    Thanks
    72
    Thanked 39 Times in 27 Posts

    UFS 912 - Test new image

    Hi Audioniek

    Thank you very much for the new image of the UFS 912. I downloaded it immediately and installed the USB image on my receiver.
    The VFD display shows the following informations:
    - wait for 1 minute
    - Load 9
    - FW missing
    - Load 6
    After that nothing happens anymore - there is no picture on the monitor.

    I'm looking forward to the next releases.

    Best regards
    Schaagi


  6. #24
    Erfahrener Benutzer
    Registriert seit
    26.07.2015
    Beiträge
    105
    Thanks
    17
    Thanked 14 Times in 8 Posts
    The same on my Ufs912. I guess start routine from DuckBA (99% Used from Ufs912 User) is different to the old Maxiboot Tool. Hopefully Audioniek can provide patched .tar.gz Image which fits with the Multiboot DuckBA ( also implemented in MorlyTool)

    Update to Ufs912 Flash Image - It works so far - nice to have a new E2 Image since long time ago
    Geändert von knaq (vor 3 Stunden um 14:00 Uhr)


  7. #25
    Erfahrener Benutzer Avatar von spartak73
    Registriert seit
    06.05.2012
    Ort
    Lattitude 51,292°N Lonitude 9,452°E
    Beiträge
    232
    Thanks
    123
    Thanked 64 Times in 38 Posts
    Atevio 7500 USB. I have a problem with mounting the hard drive and usb flash drive. I have a hard drive in the jfs file system. With this file system on other images is mounted. I tried to write to the fstab file, but it does not help. The disk is visible but not mounted ...
    Angehängte Grafiken Angehängte Grafiken
    Vu+ Duo², Formuler F3, Octagon 1028P, PrismCube Ruby, Openbox S6,S4, Skyway Classic3, Droid2
    Loader: I-Boot SW: V21218 Enigma2: MAX-TDT by spartak73, HDMU mod, PKT Hyperion v5.2 mod
    Toroidal T-90 5°W---45°E
    Sony KDL-55W955B


  8. #26
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    434
    Thanks
    114
    Thanked 452 Times in 194 Posts
    I have tried to reproduce your problem on the HS7429_USB. What I find strange is that uImage is read completely but that it does not start its built-in rcS:

    Code:
    Front USB:   scanning bus for devices... 3 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
      3727530   uimage -> the size is the same
     134217728   root.img -> size is the same
    
    2 file(s), 0 dir(s)
    
    reading uImage
    ................................................................................
    ................................................................................
    ................................................................................
    ................................................................................
    ............................................
    ret=> 3727530
    
     --={ Load Enigma2 from USB }=--  -> I do not see this one in your log, this is the start of the built-in rcS
    
    [init] Wait until /dev/sda exists
    [init] ...found, mounting /dev/sda1 -> root.img is found
    [init] Check root.img
    enigma2: clean, 6030/32768 files, 124204/131072 blocks
    [init] Mount root.img
    [init] Start Enigma2
    INIT: version 2.88 booting -> start of the rcS in the root.img
    Fortis HS7429 Enigma2
    [rcS] Init frontpanel
    [rcS] WAIT 1 minute
    [mountvirtfs] Mount /dev in tmpfs
    [mountvirtfs] Copying device nodes to /dev
    [rcS] Starting automounter
    Starting automounter: /media/usb.
    [rcS] Starting DEBUG Interface
    [mountall] Mounting local filesystems...
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    Cleaning /tmp /var/run /var/lock.
    Hostname: hs7429.
    [rcS] Starting telnetd with autologin
    [rcS] Init stmfb (LOAD 9)
    [rcS] Loading modules
    [rcS] Load audio firmware (LOAD 8)
    [rcS] Load video firmware (LOAD 7)
    [rcS] Init embx (LOAD 6)
    [rcS] Init AVS (LOAD 5)
    [rcS] Init player 191 (LOAD 4)
    [rcS] Init frontend
    [rcS] Init CI & cardreader
    [rcS] Full feature pti
    [rcS] Init player2 (LOAD 3)
    [rcS] Init HDMI-CEC
    [rcS] Init remote control (LOAD 2)
    [evremote2] Model: 'hs7429'
    [evremote2] vBoxType: 8 (hs7429)
    [evremote2] Input device name: "TDT RC event driver"
    [evremote2] Remote selected: Fortis RemoteControl
    [evremote2] RemoteControl Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
                    MENU  -  04  -  139
                     RED  -  4B  -  398
                   GREEN  -  4A  -  399
                  YELLOW  -  49  -  400
                    BLUE  -  48  -  401
                    EXIT  -  1C  -  102
                    TEXT  -  0D  -  388
                     EPG  -  08  -  365
                  REWIND  -  58  -  168
             FASTFORWARD  -  5C  -  208
                    PLAY  -  55  -  207
                   PAUSE  -  07  -  119
                  RECORD  -  56  -  167
                    STOP  -  54  -  128
                 STANDBY  -  0A  -  116
                    MUTE  -  0C  -  113
               CHANNELUP  -  5E  -  104
             CHANNELDOWN  -  5F  -  109
                VOLUMEUP  -  4E  -  115
              VOLUMEDOWN  -  4F  -  114
                    INFO  -  06  -  358
                      OK  -  1F  -  352
                      UP  -  00  -  103
                   RIGHT  -  02  -  106
                    DOWN  -  01  -  108
                    LEFT  -  03  -  105
                  RECALL  -  09  -  138
                    ZOOM  -  53  -  372
                 VFORMAT  -  0E  -  371
              RESOLUTION  -  0F  -  375
                 TVRADIO  -  1A  -  373
                   SLEEP  -  1E  -  409
                    OPEN  -  40  -  394
                     FAV  -  41  -  364
                   CHECK  -  42  -  353
                    UPUP  -  43  -  414
                DOWNDOWN  -  44  -  415
                    NEXT  -  4C  -  407
                    LAST  -  50  -  412
                     PIP  -  51  -  357
                    SWAP  -  52  -  354
                    LIST  -  0B  -  370
                 0BUTTON  -  10  -   11
                 1BUTTON  -  11  -    2
                 2BUTTON  -  12  -    3
                 3BUTTON  -  13  -    4
                 4BUTTON  -  14  -    5
                 5BUTTON  -  15  -    6
                 6BUTTON  -  16  -    7
                 7BUTTON  -  17  -    8
                 8BUTTON  -  18  -    9
                 9BUTTON  -  19  -   10
    --------------------------------------
    [evremote2] Frontpanel Map:
                 Keyname  Keyword  KeyCode
    --------------------------------------
                 STANDBY  -  00  -  116
                      OK  -  06  -  352
                    MENU  -  05  -  139
                VOLUMEUP  -  03  -  115
              VOLUMEDOWN  -  04  -  114
               CHANNELUP  -  01  -  104
             CHANNELDOWN  -  02  -  109
    --------------------------------------
    [evremote2] Supports Long KeyPress: yes
    [evremote2 fortis] Period = 10, delay = 140
    [evremote2] Using period = 10 delay = 140
    [showiframe] showSinglePic /boot/bootlogo.mvi
    [showiframe] VIDEO_SELECT_SOURCE MEMORY (Success)
    [showiframe] VIDEO_PLAY (Success)
    [showiframe] VIDEO_CONTINUE: (Success)
    [showiframe] VIDEO_CLEAR_BUFFER: (Invalid argument)
    Deconfiguring network interfaces... ifdown: interface lo not configured
    ifdown: interface eth0 not configured
    ifdown: interface eth1 not configured
    ifdown: interface wlan0 not configured
    done.
    [rcS] Starting DHCP
    Starting DHCP client: udhcpcudhcpc: started, v1.29.3
    udhcpc: sending discover
    udhcpc: sending select for 192.168.178.124
    udhcpc: lease of 192.168.178.124 obtained, lease time 864000
    route: SIOCDELRT: No such process
    adding dns 192.168.178.1
    .
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... udhcpc: started, v1.29.3
    udhcpc: sending discover
    udhcpc: sending select for 192.168.178.124
    udhcpc: lease of 192.168.178.124 obtained, lease time 864000
    route: SIOCDELRT: No such process
    adding dns 192.168.178.1
    ip: SIOCGIFFLAGS: No such device
    ip: SIOCGIFFLAGS: No such device
    done.
    [rcS] Init WLAN: None.
    [rcS] No inadyn
    [rcS] No OpenSSH
    [rcS] Set internet time
    ntpd: setting time to 2019-02-16 13:54:37.260939 (offset +603636850.492527s)
    Current system time: 13:54:37 16-02-2019 (local)
    Front panel time set to: 13:54:37 16-02-2019 (local)
    Note: /proc/stb/fp/rtc_offset set to: +3600 seconds.
    [rcS] Init portmap & ftp (LOAD 1)
    Starting portmap daemon....
    Starting FTP server: vsftpd.
    [rcS] Loading E2
    [rcS] Entering e2 main loop
    PYTHONPATH: /usr/lib/enigma2/python -> 1st enigma2 message
    DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
    ENIGMA_DEBUG_LVL=4
    [Avahi] Not running yet, cannot browse for type _e2stream._tcp.
    [eInit] + (1) Background File Eraser
    [eInit] + (5) Tuxtxt
    [eInit] + (8) graphics acceleration manager
    STMFB accel interface available
    
    [eInit] + (9) GFBDC
    I have found that the USB stick is very, very critical with these bozes; I tried more than ten, only one would work. Maybe you should try another stick?

    Regards,

    Audioniek.

    - - - Aktualisiert - - -

    Hello spartak73,

    On my testbox I have the same problem, even with the hard disk formatted in ext3. I assumed it was a particular problem of that box, but apparently it is generic. It is not the kernel-config, jfs is enabled because Fortis firmware formats in jfs by default and Fortis recordings are playable by E2:
    Code:
    #
    # File systems
    #
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    # CONFIG_EXT2_FS_POSIX_ACL is not set
    # CONFIG_EXT2_FS_SECURITY is not set
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=y
    # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
    CONFIG_EXT3_FS_XATTR=y
    # CONFIG_EXT3_FS_POSIX_ACL is not set
    # CONFIG_EXT3_FS_SECURITY is not set
    CONFIG_EXT4_FS=y
    CONFIG_EXT4_FS_XATTR=y
    # CONFIG_EXT4_FS_POSIX_ACL is not set
    # CONFIG_EXT4_FS_SECURITY is not set
    # CONFIG_EXT4_DEBUG is not set
    CONFIG_JBD=y
    CONFIG_JBD2=y
    CONFIG_FS_MBCACHE=y
    # CONFIG_REISERFS_FS is not set
    CONFIG_JFS_FS=y
    # CONFIG_JFS_POSIX_ACL is not set
    # CONFIG_JFS_SECURITY is not set
    # CONFIG_JFS_DEBUG is not set
    # CONFIG_JFS_STATISTICS is not set
    CONFIG_FS_POSIX_ACL=y
    Will investigate further.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark Triplex, Amiko Alien 3, Sogno Spark Revolution, Topfield TF7710HDPVR, Kathrein UFS912, Vizyon revolution 820HD PVR
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers


  9. #27
    Erfahrener Benutzer Avatar von spartak73
    Registriert seit
    06.05.2012
    Ort
    Lattitude 51,292°N Lonitude 9,452°E
    Beiträge
    232
    Thanks
    123
    Thanked 64 Times in 38 Posts
    Thanks, I will try with other flash drives. The plugin for the front display Atevio7500 is just super!
    Vu+ Duo², Formuler F3, Octagon 1028P, PrismCube Ruby, Openbox S6,S4, Skyway Classic3, Droid2
    Loader: I-Boot SW: V21218 Enigma2: MAX-TDT by spartak73, HDMU mod, PKT Hyperion v5.2 mod
    Toroidal T-90 5°W---45°E
    Sony KDL-55W955B

  10. The Following 2 Users Say Thank You to spartak73 For This Useful Post:



  11. #28
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    434
    Thanks
    114
    Thanked 452 Times in 194 Posts
    Hello Schaagi,

    I have been able to reproduce your problem with UFS912_USB and I think I have fixed it. In post #19 is a new link for download.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark Triplex, Amiko Alien 3, Sogno Spark Revolution, Topfield TF7710HDPVR, Kathrein UFS912, Vizyon revolution 820HD PVR
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  12. The Following 2 Users Say Thank You to Audioniek For This Useful Post:



  13. #29
    Erfahrener Benutzer
    Registriert seit
    12.07.2012
    Beiträge
    135
    Thanks
    72
    Thanked 39 Times in 27 Posts
    Hi Audioniek

    Thank you for the update. Now it works. I will test the image and give you feedback.

    Regards Schaagi


Berechtigungen

  • Neue Themen erstellen: Ja
  • Themen beantworten: Ja
  • Anhänge hochladen: Ja
  • Beiträge bearbeiten: Ja
  •