+ Antworten
Seite 4 von 11 ErsteErste ... 23456 ... LetzteLetzte
Ergebnis 31 bis 40 von 107
  1. #31
    VIP Avatar von vISIOn
    Registriert seit
    15.05.2012
    Beiträge
    103
    Thanks
    49
    Thanked 38 Times in 20 Posts
    Ich habe die Images mal in einer DB zusammen gestellt für mich die ich versuche aktuell zu halten ... wenn wer mal eins suchen sollte dann PN an mich.
    << SH4 Enigma2 Archiv Audioniek images >>

    Dreambox 920
    Mut@nt HD51

    Viele SH4 Receiver

  2. The Following 2 Users Say Thank You to vISIOn For This Useful Post:



  3. #32
    Erfahrener Benutzer
    Registriert seit
    31.10.2013
    Beiträge
    221
    Thanks
    62
    Thanked 19 Times in 15 Posts
    Amiko SHD 8900 Alien works, but when I tried to change the skin to default it hang, dat pokke ding! Sorry,no log yet. I could also not load any plugins. But that is for stage 2...
    But the great thing is, it works and you can watch televison!


  4. #33
    Benutzer Avatar von dreamce
    Registriert seit
    20.01.2013
    Beiträge
    54
    Thanks
    12
    Thanked 3 Times in 2 Posts
    Master-Audioniek,
    SparkVfdControl plug-in will you give,Please


  5. #34
    Neuer Benutzer
    Registriert seit
    02.09.2013
    Beiträge
    24
    Thanks
    8
    Thanked 8 Times in 6 Posts
    hs7819_Audioniek_enigma2_gst_flash_P217_CDK-rev1091 not work
    here is my crash
    Code:
    OpenPLi Enigma2 crash log
    
    crashdate=Sun Feb 17 17:15:47 2019
    compiledate=Jan 26 2019
    skin=PLi-HD/skin.xml
    sourcedate=2018-12-09
    branch=(HEAD detached at a8e73e1)
    rev=a8e73e1
    component=Enigma2
    
    stbmodel=hs7819
    stbmodel=hs7819
    kernelcmdline=console=ttyAS0,115200 root=/dev/mtdblock2 ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 console_loglevel=7 stmmaceth=ethaddr:00:1e:b8:0a:b7:e3
    nimsockets=NIM Socket 0:
    imageversion=version=0350200905300000
    
    
    osition
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    showing config
    [ActionMap] Keymap 'WizardActions' -> Action = 'ok'
    OK
    finished
    code self.selectInterface()
    getStepWithID: nwconfig
    result: 2
    Updating values in step 3
    set LCD text
    wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")\nself.selectKey("UP")\nself.selectKey("DOWN")\nself.selectKey("LEFT")\nself.selectKey("RIGHT")', 'text': 'Please configure your internet connection by filling out the required values.\nWhen you are ready press OK to continue.', 'displaytext': 'Configure interface', 'id': 'nwconfig', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': u'self.AdapterSetupEnd(self.selectedInterface)', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.AdapterSetup'>, 'args': 'self.selectedInterface', 'type': 'ConfigList'}}
    wizard text Veuillez configurer votre connexion Internet en renseignant les valeurs nécessaires.
    Quand vous serez prêt, appuyez sur OK pour continuer.
    set LCD text
    code self.clearSelectedKeys()
    self.selectKey("OK")
    self.selectKey("UP")
    self.selectKey("DOWN")
    self.selectKey("LEFT")
    self.selectKey("RIGHT")
    selectPic: arrowdown
    selectPic: arrowdown2
    showing list, 3
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    setZPosition
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    showing config
    wizard screen <class 'Screens.NetworkSetup.AdapterSetup'>
    [Skin] Processing screen: AdapterSetup
    valign must be either top, center or bottom!
    valign must be either top, center or bottom!
    clearConfigList <Components.ConfigList.ConfigList object at 0x2d35deec> <Components.ConfigList.ConfigList object at 0x2cb4ac2c>
    clearConfigList <Components.ConfigList.ConfigList object at 0x2cb4ac2c> <Components.ConfigList.ConfigList object at 0x2cb4ac2c>
    Now: 3
    Now: 3
    [ActionMap] Keymap 'WizardActions' -> Action = 'ok'
    OK
    finished
    code self.AdapterSetupEnd(self.selectedInterface)
    [Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.openpli.org')
    [eConsoleAppContainer] Starting /bin/ping
    [Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.nl')
    [eConsoleAppContainer] Starting /bin/ping
    [Console] command: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.com')
    [eConsoleAppContainer] Starting /bin/ping
    [Skin] Processing screen: MessageBox
    warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Veuillez patienter pendant le test de votre réseau...)
    [Skin] Processing screen: MessageBox_summary
    Now: 3
    [Console] finished: ('/bin/ping', '/bin/ping', '-c', '1', 'www.openpli.org')
    [Console] finished: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.nl')
    [Console] finished: ('/bin/ping', '/bin/ping', '-c', '1', 'www.google.com')
    getStepWithID: checklanstatusend
    result: 4
    Updating values in step 5
    set LCD text
    wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Your receiver is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue.', 'displaytext': 'Please follow the instructions on the TV', 'id': 'checklanstatusend', 'condition': u'self.condition = (self.InterfaceState == True )', 'timeoutaction': 'nextpage', 'nextstep': 'end', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': u'currStep = self.numSteps\nself.wizard[currStep]["nextstep"] = None\nself.markDone()\nself.close()', 'config': {'screen': None, 'args': None, 'type': ''}}
    wizard text Votre récepteur est maintenant prêt à être utilisé.
    
    Votre connexion Internet fonctionne maintenant.
    
    S'il vous plaît appuyez sur OK pour continuer.
    set LCD text
    code self.clearSelectedKeys()
    self.selectKey("OK")
    selectPic: arrowdown
    showing list, 5
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    setZPosition
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    showing config
    Now: 5
    [ActionMap] Keymap 'WizardActions' -> Action = 'ok'
    OK
    finished
    code currStep = self.numSteps
    self.wizard[currStep]["nextstep"] = None
    self.markDone()
    self.close()
    getStepWithID: end
    result: 13
    Updating values in step 14
    wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard.\nPlease press OK to continue.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
    wizard text Merci d'utiliser l'assistant.
    Veuillez appuyer sur OK pour continuer.
    code self.clearSelectedKeys()
    self.selectKey("OK")
    selectPic: arrowdown
    showing list, 14
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    setZPosition
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    self.list: <Components.Sources.List.List object at 0x2cb4acac>
    showing config
    Now: 14
    Now: 14
    Reading  ['startwizard.xml']
    getStepWithID: start
    result: 0
    [Skin] Processing screen: StartWizard
    [Skin] Error in screen 'StartWizard' widget 'panel': {PLi-HD/skin.xml}: Failed to create skincontext (top,8%,*,None) in Context (128,0)+(1060,720) : unsupported operand type(s) for -=: 'int' and 'NoneType'. Please contact the skin's author!
    [Skin] Error in screen 'StartWizard' widget 'panel': {PLi-HD/skin.xml}: Failed to create skincontext (bottom,10%,*,None) in Context (128,0)+(1060,720) : unsupported operand type(s) for -: 'int' and 'NoneType'. Please contact the skin's author!
    warning, skin is missing element wizard in <class 'Screens.StartWizard.StartWizard'>
    warning, skin is missing element stepslider in <class 'Screens.StartWizard.StartWizard'>
    WizardCreateSummary
    [Skin] Processing screen: WizardSummary
    Updating values in step 1
    wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Welcome.\n\nThis start wizard will guide you through the basic setup of your receiver.\nPress the OK button on your remote control to move to the next step.', 'id': 'start', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': 'introduction', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
    wizard text Bienvenue.
    
    Cet assistant de démarrage vous guidera à travers la configuration de base de votre récepteur.
    Appuyez sur le bouton OK de votre télécommande pour passer à l'étape suivante.
    code self.clearSelectedKeys()
    self.selectKey("OK")
    selectPic: arrowdown
    showing list, 1
    self.list: <Components.Sources.List.List object at 0x2d35b52c>
    self.list: <Components.Sources.List.List object at 0x2d35b52c>
    setZPosition
    showing config
    [ActionMap] Keymap 'WizardActions' -> Action = 'ok'
    OK
    finished
    getStepWithID: introduction
    result: 1
    Updating values in step 2
    wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("UP")\nself.selectKey("DOWN")', 'text': 'Use the up/down keys on your remote control to select an option. After that, press OK.', 'id': 'introduction', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [('Use the wizard to set up basic features', 'network'), ('Exit the wizard', 'end')], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
    wizard text Utiliser les boutons HAUT et BAS de votre télécommande pour sélectionner une option. Après cela, appuyez sur OK.
    code self.clearSelectedKeys()
    self.selectKey("UP")
    self.selectKey("DOWN")
    selectPic: arrowdown
    selectPic: arrowdown2
    showing list, 2
    self.list: <Components.Sources.List.List object at 0x2d35b52c>
    self.list: <Components.Sources.List.List object at 0x2d35b52c>
    setZPosition
    showing config
    Now: 2
    Now: 2
    [ActionMap] Keymap 'WizardActions' -> Action = 'down'
    down
    [ActionMap] Keymap 'WizardActions' -> Action = 'ok'
    OK
    finished
    current: ("Quitter l'assistant", 'end')
    getStepWithID: end
    result: 22
    Updating values in step 23
    wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard. Your receiver is now ready for use.\nPress OK to start using your receiver.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}, 'laststep': 'true'}
    wizard text Merci d'avoir utilisé l'assistant. Votre récepteur est maintenant prêt à être utilisé.
    Appuyez sur OK pour commencer à utiliser votre récepteur.
    code self.clearSelectedKeys()
    self.selectKey("OK")
    selectPic: arrowdown
    showing list, 23
    self.list: <Components.Sources.List.List object at 0x2d35b52c>
    self.list: <Components.Sources.List.List object at 0x2d35b52c>
    setZPosition
    showing config
    Now: 23
    Now: 23
    [ActionMap] Keymap 'WizardActions' -> Action = 'ok'
    OK
    finished
    wizard finished
    Now: 23
    [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
    [Skin] Processing screen: <embedded-in-'Screensaver'>
    [Skin] Processing screen: SecondInfoBar
    [Skin] Processing screen: SecondInfoBarSimple
    [SKIN] Parsing embedded skin <embedded-in-'HideVBILine'>
    [Skin] Processing screen: <embedded-in-'HideVBILine'>
    [Skin] Processing screen: ChannelSelection
    warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
    [Skin] Processing screen: RdsInfoDisplay
    [Skin] No skin to read...
    [Skin] Processing screen: <embedded-in-'RdsInfoDisplaySummary'>
    [Skin] Processing screen: UnhandledKey
    [Skin] Processing screen: Dish
    [Skin] Processing screen: BufferIndicator
    [Skin] Processing screen: TimeshiftState
    [Skin] Processing screen: TimeshiftLive
    [Skin] Processing screen: SubtitleDisplay
    RemovePopup, id = ZapError
    [Skin] Processing screen: InfoBar
    [Skin] Processing screen: InfoBarSummary
    playing 1:0:1:274C:7FC:2:11A0000:0:0:0::ITV London
    [VFD-Icons] __evStart
    [eDVBServicePlay] timeshift
    [eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
    not pauseable.
    [eDVBServicePlay] timeshift
    [eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
    not pauseable.
    [eDVBServicePlay] timeshift
    [eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
    not pauseable.
    [eDVBServicePlay] timeshift
    [eDVBServicePlay] timeshift not enough diskspace for timeshift! (less than 200MB)
    new service started! trying to download cuts!
    download failed, no cuesheet interface
    RemovePopup, id = ZapError
    [eDVBResourceManager] allocate channel.. 07fc:0002
    [eDVBSatelliteEquipmentControl] direct_connected 1
    [eDVBSatelliteEquipmentControl] canTune 1
    [eDVBSatelliteEquipmentControl] lnb 0 found
    [eDVBSatelliteEquipmentControl] lnb 1 found
    [eDVBSatelliteEquipmentControl] lnb 2 found
    [eDVBSatelliteEquipmentControl] sat 282 found
    [eDVBSatelliteEquipmentControl] ret1 10000
    [eDVBSatelliteEquipmentControl] ret5 10000
    [eDVBSatelliteEquipmentControl] ret 10000, score old 0
    [eDVBSatelliteEquipmentControl] score new 10000
    [eDVBSatelliteEquipmentControl] lnb 3 found
    [eDVBSatelliteEquipmentControl] final score 10002
    [eDVBFrontend0] opening frontend
    [eDVBFrontend0] tune
    [eDVBSatelliteEquipmentControl] direct_connected 1
    [eDVBSatelliteEquipmentControl] canTune 1
    [eDVBSatelliteEquipmentControl] lnb 0 found
    [eDVBSatelliteEquipmentControl] lnb 1 found
    [eDVBSatelliteEquipmentControl] lnb 2 found
    [eDVBSatelliteEquipmentControl] sat 282 found
    [eDVBSatelliteEquipmentControl] ret1 10000
    [eDVBSatelliteEquipmentControl] ret5 10000
    [eDVBSatelliteEquipmentControl] ret 10000, score old 0
    [eDVBSatelliteEquipmentControl] score new 10000
    [eDVBSatelliteEquipmentControl] lnb 3 found
    [eDVBSatelliteEquipmentControl] final score 10002
    [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
    [eDVBFrontend0] prepare_sat System 0 Freq 10758500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
    [eDVBFrontend0] tuning to 1008 mhz
    [eDVBChannel] OURSTATE: tuning
    [eDVBServicePMTHandler] allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:1:274C:7FC:2:11A0000:0:0:0::ITV London
    [eDVBChannel] getDemux cap=00
    [eDVBResourceManager] allocate demux cap=00
    [eDVBResourceManager] allocating demux adapter=0, demux=0, source=-1 fesource=0
    [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    [eDVBFrontend0] set sequence pos 3
    [eDVBFrontend0] set sequence pos 4
    [eDVBFrontend0] setVoltage 1
    [eDVBFrontend0] sleep 200ms
    [eDVBFrontend0] invalidate current switch params
    [eDVBFrontend0] sendDiseqc: e00000(DiSEqC reset)
    [eDVBFrontend0] sleep 50ms
    [eDVBFrontend0] sendDiseqc: e00003(DiSEqC peripherial power on)
    [eDVBFrontend0] sleep 150ms
    [eDVBFrontend0] sendDiseqc: e01038f8(?)
    [eDVBFrontend0] sleep 100ms
    [eDVBFrontend0] set sequence pos 3
    [eDVBFrontend0] set sequence pos 3
    [eDVBFrontend0] update current switch params
    [eDVBFrontend0] startTuneTimeout 5000
    [eDVBFrontend0] setFrontend 1
    [eDVBFrontend0] setting frontend
    [eDVBFrontend0] fe event: status 0, inversion off, m_tuning 1
    [eDVBFrontend0] sleep 500ms
    [eDVBChannel] OURSTATE: failed, retune
    [eDVBFrontend0] tune
    [eDVBSatelliteEquipmentControl] direct_connected 1
    [eDVBSatelliteEquipmentControl] canTune 1
    [eDVBSatelliteEquipmentControl] lnb 0 found
    [eDVBSatelliteEquipmentControl] lnb 1 found
    [eDVBSatelliteEquipmentControl] lnb 2 found
    [eDVBSatelliteEquipmentControl] sat 282 found
    [eDVBSatelliteEquipmentControl] ret1 10000
    [eDVBSatelliteEquipmentControl] ret5 10000
    [eDVBSatelliteEquipmentControl] ret 10000, score old 0
    [eDVBSatelliteEquipmentControl] score new 10000
    [eDVBSatelliteEquipmentControl] lnb 3 found
    [eDVBSatelliteEquipmentControl] final score 10002
    [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
    [eDVBFrontend0] prepare_sat System 0 Freq 10758500 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
    [eDVBFrontend0] tuning to 1008 mhz
    [eDVBChannel] OURSTATE: tuning
    [eDVBServicePMTHandler] tune failed.
    [eDVBServicePlay] DVB service failed to tune - error 1
    RemovePopup, id = ZapError
    AddPopup, id = ZapError
    [Skin] Processing screen: MessageBoxSimple
    [Skin] Error in screen 'MessageBoxSimple' widget 'widget': {PLi-HD/skin.xml}: component with name 'autoresize' was not found in skin of screen 'MessageBoxSimple'!. Please contact the skin's author!
    warning, skin is missing element WarningPixmap in <class 'Screens.MessageBox.MessageBox'>(Echec accord!)
    Traceback (most recent call last):
      File "/usr/lib/enigma2/python/Navigation.py", line 69, in dispatchEvent
      File "/usr/lib/enigma2/python/Components/ServiceEventTracker.py", line 80, in event
      File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3464, in __tuneFailed
      File "/usr/lib/enigma2/python/Tools/Notifications.py", line 58, in AddPopup
      File "/usr/lib/enigma2/python/Tools/Notifications.py", line 32, in AddNotificationWithID
      File "/usr/lib/enigma2/python/Tools/Notifications.py", line 19, in __AddNotification
      File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 2983, in checkNotificationsIfExecing
      File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 3017, in checkNotifications
      File "/usr/lib/enigma2/python/mytest.py", line 242, in instantiateDialog
        return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
      File "/usr/lib/enigma2/python/mytest.py", line 266, in doInstantiateDialog
        dlg.applySkin()
      File "/usr/lib/enigma2/python/Components/GUISkin.py", line 154, in applySkin
      File "/usr/lib/enigma2/python/Components/GUISkin.py", line 55, in createGUIScreen
      File "skin applet", line 23, in <module>
    AttributeError: 'MessageBox' object has no attribute 'getListWidth'
    [ePyObject] (CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation instance at 0x2c50d74c>>,(3,)) failed)
    
    
    dmesg
    
    Error reading klog 38 - Function not implemented
    Geändert von flac (17.02.2019 um 18:38 Uhr) Grund: Statt in Quote in Code gesetzt


  6. #35
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    It is not as easy as that, because it is not a plugin available as .ipk but is built in as an integral part of the image. The code is contained in a patch vfd_dirvers.patch that you can download or clone from my git.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers


  7. #36
    Erfahrener Benutzer
    Registriert seit
    10.11.2012
    Beiträge
    140
    Thanks
    69
    Thanked 10 Times in 9 Posts
    hello Audioniek eplayer3 does not work thanks.


  8. #37
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    Zitat Zitat von spartak73 Beitrag anzeigen
    Atevio 7500 USB. I have a hard drive in the jfs file system. With this file system on other images is mounted. I tried to write to the fstab file, but it does not help.
    The kernel configuration is indeed OK. I am using this fstab now and it mounts a Fortis prepared jfs-formatted drive properly:

    Code:
    # /etc/fstab: static file system information.
    #
    # <file system> <mount point>   <type>  <options>                                       <dump>  <pass>
    #/dev/root      /               auto    defaults,errors=remount-rw,noatime,nodiratime   0       0
    proc            /proc           proc    defaults                                        0       0
    tmpfs           /tmp            tmpfs   defaults                                        0       0
    #
    /dev/sda1       /hdd            auto    defaults,noatime,nodiratime                     0       0
    #/dev/sda2      none            swap    sw
    #/dev/sdb1      /hdd            auto    defaults,noatime,nodiratime                     0       0
    #/dev/sdc1      /hdd            auto    defaults,noatime,nodiratime                     0       0
    #/dev/sdd1      /hdd            auto    defaults,noatime,nodiratime                     0       0
    LABEL=RECORD    /hdd            auto    defaults,errors=remount-ro,noatime,nodiratime   0       0
    LABEL=SWAPPART  none            swap    sw
    There are two mounts listed for /hdd. The idea is that mount -a processes them in order. Fortis does not label their partitions, so the attempt for /dev/sda1 should succeed in case of a Fortis jfs-formatted drive. The attempt for LABEL=RECORD will fail.
    In the other case (LABEL=RECORD is present on /dev/sda1) This first mount will succeed, and second will remount (in this case) the same partition.

    Another, more simple solution is label the jfs-partition RECORD.

    Hope this works for you.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  9. The Following User Says Thank You to Audioniek For This Useful Post:



  10. #38
    Erfahrener Benutzer Avatar von spartak73
    Registriert seit
    06.05.2012
    Ort
    Lattitude 51,292°N Lonitude 9,452°E
    Beiträge
    235
    Thanks
    126
    Thanked 66 Times in 39 Posts
    I tried your fstab. But also did not help. I tried to mount on the UUID also did not work. My image is installed on usb on a partition in ext3. The flash drive has 8 partitions.

    Code:
    atevio7500:~# mount
    rootfs on / type rootfs (rw)
    /dev/root on / type ext3 (rw,relatime,errors=continue,data=writeback)
    proc on /proc type proc (rw,relatime)
    sysfs on /sys type sysfs (rw,relatime)
    tmpfs on /ram type tmpfs (rw,relatime)
    /dev/root on /dev.static type ext3 (rw,relatime,errors=continue,data=writeback)
    tmpfs on /dev type tmpfs (rw,relatime)
    devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
    tmpfs on /dev/shm type tmpfs (rw,relatime)
    usbfs on /proc/bus/usb type usbfs (rw,relatime)
    automount(pid629) on /media/usb type autofs (rw,relatime,fd=4,pgrp=629,timeout=300,minproto=2,maxproto=4,indirect)
    tmpfs on /tmp type tmpfs (rw,relatime)
    atevio7500:~#
    Hard drive has a label RECORD. Here are screenshots from another image on this flash drive
    Angehängte Grafiken Angehängte Grafiken
    Geändert von spartak73 (19.02.2019 um 19:21 Uhr)
    Vu+ Duo², Formuler F3, Octagon 1028P, PrismCube Ruby, Openbox S6,S4, Skyway Classic3, Droid2
    Loader: I-Boot SW: V21218 Enigma2: MAX-TDT by spartak73, HDMU mod, PKT Hyperion v5.2 mod
    Toroidal T-90 5°W---45°E
    Sony KDL-55W955B


  11. #39
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    The only thing I came across while testing is that when the jfs-drive has a damaged structure it will not mount, with the effects you describe. After a fsck /dev/sda1 everything started to work as expected/desired.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  12. The Following 2 Users Say Thank You to Audioniek For This Useful Post:



  13. #40
    Erfahrener Benutzer Avatar von spartak73
    Registriert seit
    06.05.2012
    Ort
    Lattitude 51,292°N Lonitude 9,452°E
    Beiträge
    235
    Thanks
    126
    Thanked 66 Times in 39 Posts
    Thanks after checking, the disk was mounted.
    Vu+ Duo², Formuler F3, Octagon 1028P, PrismCube Ruby, Openbox S6,S4, Skyway Classic3, Droid2
    Loader: I-Boot SW: V21218 Enigma2: MAX-TDT by spartak73, HDMU mod, PKT Hyperion v5.2 mod
    Toroidal T-90 5°W---45°E
    Sony KDL-55W955B

  14. The Following User Says Thank You to spartak73 For This Useful Post:



Berechtigungen

  • Neue Themen erstellen: Ja
  • Themen beantworten: Ja
  • Anhänge hochladen: Ja
  • Beiträge bearbeiten: Ja
  •