Audioniek Images: download

[Audioniek]

@tanaka:

Good point. Apparently the PKT people have found a solution outside the bootloader I have not thought of yet. I will look into the problem again. If anyone has a suggestion for a solution within the image, I am glad to here it.

Regards,

Audioniek.

[marto]

Hi, Audioniek and thanks for confirming the issues! Perhaps you can use the frontprocessor driver from "PKT Hyperion 5.5 CUBEREVO", which is a very stable image, but outdated already, or even from the latest HDMU images for this box...

[harryhase]

@Audioniek: Did you ever tried booting with active usb hub, that maybe works?
maybe we can ask nit or gost4711 if they have the source code, the titanit has a own bootloader

[harryhase]

okay, i see what we need to get it to boot; A kind of usb-reset or refresh of the usb devices. it is not a problem of the bootloader, because a part of the image is already running bevor it stop.

1) take a usb hub with at minimum 2 ports
2) let the device boot until you see the message of #100 in the terminal
3) pull off the usb-stick and
4) wait a second
5) plug the usb-stick into the other port
6) the device continuses the booting and the image starts


edit: not working every time, but now i can see the problem, if the usb-stick is not lightning, than it does not work, if it lights it works. i seems like the usb driver are not correct, so that it is not every time correct initialized

edit2: if i change the uImage (from PKT) then it all the time starts booting (okay, not starting, because not the right initialisation, but they have solved this issue)

[aness]

Thanks Audioniek great work we wait to usb cubrevo images

[kyk65]

Hi Audioniek Cuberevo Mini II Micom front panel driver version V1.08Audioniek initializing
[cuberevo_micom] 1. = 0x08
[cuberevo_micom] 3. = 0x06
[cuberevo_micom] 5. = 0x02
[cuberevo_micom] Pos. response received (0xeb)
[cuberevo_micom] Command processed - remaining jiffies 119
[cuberevo_micom] 7. = 0x08
[cuberevo_micom] 9. = 0x06
[cuberevo_micom] 11. = 0x02
[cuberevo_micom] Pos. response received (0xeb)
[cuberevo_micom] Command processed - remaining jiffies 119
[cuberevo_micom] 13. = 0x08
[cuberevo_micom] 15. = 0x06
[cuberevo_micom] 17. = 0x02
[cuberevo_micom] Pos. response received (0xeb)
[cuberevo_micom] Command processed - remaining jiffies 120
[cuberevo_micom] Frontpanel version: 02.06.2008
[cuberevo_micom] Probe: Micom front panel real time clock
micom-rtc micom-rtc: rtc core: registered micom as rtc0
[cuberevo_micom] Unknown IOCTL 0x5401.
[cuberevo_micom] micomWriteString UTF8 text: [LOAD], len = 4
[cuberevo_micom] micomWriteString Non-UTF8 text: [LOAD], len = 4
[cuberevo_micom] Text: LOAD (len = 14)
[cuberevo_micom] close minor 0

[ainouna]

Hello everyone
for test
enigma2 external flash for hs 7429
https://www.mediafire.com/file/mp51u27c5x9agkb/hs7429_enigma2_USB-2-rev1419.zip/file

thank you audioniek for
your great work

Regards
ainouna

[sadaghiani]

Hello everyone
for test
enigma2 external flash for hs 7429
https://www.mediafire.com/file/mp51u27c5x9agkb/hs7429_enigma2_USB-2-rev1419.zip/file

thank you audioniek for
your great work

Regards
ainouna

tnx
how did you solve the boot problem?
Of course, it only works once and it won't boot after restarting

[ainouna]

Hello ...
if you have boot 7.37
then it works fine
otherwise reflash the 7.37 boot on your receiver

Regards
ainouna

[mountaineer]

Thank you again for your hard work. I posted back a while about 1028 or at7500 having issues with a particular signal and posted a file for it. I have narrowed it down to 1 particular type of signal...DVB S2 30000 SR 5/6 FEC...does not matter if channel is MPEG 2 or 4 ... the tuner has trouble locking that signal...S2 8psk 30000 SR 5/6 FEC......thank you for looking at that.