Laberthread zu den Anleitungen

[santa]

serielles log vom boot, hast du die Partition wieder richtig formatiert?
also
mkfs.ext2 -I128 -b4096 -L MINI10 /dev/sda10

Ansonsten kann es eben sein das es das uboot nicht will, mach mal log.

[Anskar]

Hier das log:

Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM:  32 MB
 write time out = 1, clock = 40
 write time out = 1, clock = 40
Flash: 16 MB
In:    serial
Out:   serial
Err:   serial
pll0 freq 531
pll1 freq 399
Net:   VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot:  0
## Booting image at a0030000 ...
   Image Name:   mini U-boot-r1.3
   Image Type:   SuperH Linux Standalone Program (gzip compressed)
   Data Size:    65249 Bytes = 63.7 kB
   Load Address: 84601000
   Entry Point:  84601000
   Verifying Checksum ... OK
   Uncompressing Standalone Application ... OK
selected Image to start: HDMU_1233
selected Image to start: HDMU_1202
selected Image to start: HDMU_1201
selected Image to start: BPanther_4457
selected Image to start: HDMU_1174
selected Image to start: PKT_NEBULA_v2
selected Image to start: -Image7-

Reset IDE: Bus 0: OK
  Device 0: Model: SAMSUNG HM160HI  Firm: HH100-08 Ser#: 1SU0DJZQ166637
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 152627.8 MB = 149.0 GB (312581808 x 512)
loading from ide 0:16
## Booting image at a5000000 ...
Bad Magic Number
<INTERRUPT>

Board: STb7100-mboard


U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)

DRAM:  32 MB
 write time out = 1, clock = 40
 write time out = 1, clock = 40
Flash: 16 MB
In:    serial
Out:   serial
Err:   serial
pll0 freq 531
pll1 freq 399
Net:   VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot:  0
## Booting image at a0030000 ...
   Image Name:   mini U-boot-r1.3
   Image Type:   SuperH Linux Standalone Program (gzip compressed)
   Data Size:    65249 Bytes = 63.7 kB
   Load Address: 84601000
   Entry Point:  84601000
   Verifying Checksum ... OK
   Uncompressing Standalone Application ... OK
selected Image to start: HDMU_1233