DVB-S2 spark 7162

[DboxOldie]

even if you switch channel on same transponder it says tune failed

Well then its another corner in the driver, what are the technical datas for this channels ? ( FEC, Symrate )
But its impossible for me to search for this Bug without having this sat position...

[santa]

cuebase, maybe you can find a transponder on 19,2° with this bug, then dboxoldie or somewhere will find a solution.

[cuebase]

Ok will look now many thanks for the suggestion

[osborne82]

attached are logs from a scan on both 28 east and 19 east
all hd channels get picked up on 19 and no tune error but on 28 e there are problems
hope this helps


cheers
osborne82

[cuebase]

I have looked at these and do not really understand whats going on, has any one else got any ideas

[DboxOldie]

Well the logs are quite big...
@osborne82: can you do the following:
1. switch to a 28e channel which not works, and post this part of the log
2. scan only this transponder which channels not work, and post this log
Perhaps I can try to compare them with quite similar astra channels to find something..

[cuebase]

I have found something strange in tuner setup. transponder 12012 V 29500 3/4 28.2e Will show no signal if you try to scan it. if you go to tuner config and set your tuner to 25.5 e you can then scan that transponder and other HD transponders and the HD channels will work but obviously the channels that are scanned on 28.2 then say tuner fail. This is using a fixed dish pointed at 28.2

[cuebase]

Here is a smaller scan off HD channels on 28.2 if anybody can help would be most grateful.

Thanks to osborne

[DboxOldie]

Well, I made a quick look in the log:
It seems to me that all channels which don´t work have symbol rates with 29500 ?
Can you confirm this ?

[cuebase]

I just had a quick look through the bouquet I am using and yes 29500 channels seems to be the problem. Do not no how i missed that before