[HowTo] : Installationshilfe für Anfänger - HDMU auf einer UFS-910 nutzen

[sheriff2000]

So stick ist neu mit 4 partitionen ext2

sda1 ist swap 1gb
sda2 ist ext2 (für image) label mini1 1gb
sda3 ist ext2 (für image) label mini2 1gb
sda4 ist ext3 record 29gb

wohin soll image installiert werden? sda 2 oder sda 3
hier meine bootargs:

boot_param_version=20

board=stb7100ref_27
bootdelay=1
ethaddr=00:50:fd:ff:12:34
autoload=n
bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=38m bigphysarea=1280 coprocessor_mem=2m@0x04000000,2m@0x04200000
ba2cmd=if itest.s $ba2flag == 1; then set ba2flag 0; saveenv;if itest.l *a0fd0000 == -85525248; then go a0fd0000; fi; fi; bootm a0040000
stdin=serial
stdout=serial
stderr=serial
ipaddr=192.168.1.100
serverip=0.0.0.0
gateway=0.0.0.0
gatewayip=192.168.1.1
netmask=255.255.255.0
bootdesc_0=----Flash----
bootcmd_0=run bootargs_0; bootm a0040000
bootargs_0=set bootargs console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:0.0.0.0:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:12:34 init=/bin/devinit
bootdesc_9=-USB-1-Speed-
bootcmd_9=run bootargs_9; bootm a0040000
bootargs_9=set bootargs console=ttyAS0,115200 root=/dev/sda2 rw ip=192.168.1.100:0.0.0.0:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:12:34 init=/bin/devinit
bootdesc_8=----USB-2----
bootcmd_8=usb reset;ext2load usb 0:3 a5000000 /boot/uImage;run bootargs_8;bootm a5000000
bootargs_8=set bootargs console=ttyAS0,115200 root=/dev/sda3 rw ip=192.168.1.100:0.0.0.0:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:12:34 init=/bin/devinit
bootdesc_7=----USB-3----
bootcmd_7=usb reset;ext2load usb 0:4 a5000000 /boot/uImage;run bootargs_7;bootm a5000000
bootargs_7=set bootargs console=ttyAS0,115200 root=/dev/sda4 rw ip=192.168.1.100:0.0.0.0:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:12:34 init=/bin/devinit
bootcmd=bootm a0030000
ba2flag=0
bootmenutimeout=2
rootdelay=1
front=3
backupper=1
backlower=3
hdd=yes
bootdesc_default=0
TitanNit-ufs910:~#