imDisplay steht "load Modules" nix geht

[miko2103]

dann werd ich mal testen

nur mal so.....find es wirklich klasse hier und das es für den Topf mal wieder etwas zum spielen gibt!!!

[fotomek69]

habe das neue image instaliert jetz habe ich auch load modules per telnet geth garnichts nur hyperterminal
























ToFiÿ
<<< Loader L23531>>>

ë[B"ò8
bÿ
ÜÄp ¸¬

Board: TF7700 [29-bit mode]


U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ..
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1854960 Bytes = 1.8 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192
.168.178.63:192.168.178.1:192.168.178.1:255.255.25 5.0:tf7700:eth0ff mem=128m c
oprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwad
dr:00:3e:9e:d9:04:25 - 0x00000000 - 0 ...

INIT: version 2.86 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
Cleaning /tmp.
Hostname: tf7700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
sh: !=0: unknown operand
sh: !=0: unknown operand
sh: !=0: unknown o
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
insmod: can't insert '/lib/modules/tffp.ko': File exists
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 5/25/2012 7:04:28

/dev/sda3 is mounted and the file system is not type JFS.

WARNING!!!
Running jfs_fsck on a mounted file system
or on a file system other than JFS
may cause SEVERE file system damage.

Do you really want to continue (y/n)?
ToFiÿ
<<< Loader L23531>>>

ë[B"ò8
bÿ
ÜÄp ¸¬

Board: TF7700 [29-bit mode]


U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1854960 Bytes = 1.8 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192
.168.178.63:192.168.178.1:192.168.178.1:255.255.25 5.0:tf7700:eth0ff mem=128m c
oprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 n
dr:00:3e:9e:d9:04:25 - 0x00000000 - 0 ...

INIT: version 2.86 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
Cleaning /tmp.
Hostname: tf7700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
sh: !=0: unknown operand
sh: !=0: unknown operand
sh: !=0: unknown operand
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Suc
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
insmod: can't insert '/lib/modules/tffp.ko': File exists
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 5/25/2012 702

/dev/sda3 is mounted and the file system is not type JFS.

WARNING!!!
Running jfs_fsck on a mounted file system
or on a file system other than JFS
may cause SEVERE file system damage.

Do you really want to continue (y/n)?
ToFiÿ
<<< Loader L23531>>>

ë[B"ò8
bÿ
ÜÄp ¸¬

Board: TF7700 [29-


U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1854960 Bytes = 1.8 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192
.168.178.63:192.168.178.1:192.168.178.1:255.255.25 5.0:tf7700:eth0ff mem=128m c
oprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwad
dr:00:3e:9e:d9:04:25 - 0x00000000 - 0 ...

INIT: version 2.86 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
Cleaning /tmp.
Hostname: tf7700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
sh: !=0: unknown operand
sh: !=0: unknown operand
sh: !=0: unknown operand
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
insmod: can't insert '/lib/modules/tffp.ko': File exists
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 5/25/2012 7:10:35

/dev/sda3 is mounted and the file system is not type JFS.

WARNING!!!
Running jfs_fsck on a mounted file system
or on a file system other than JFS
may cause SEVERE file system damage.

Do you really want to continue (y/n)?
ToFiÿ
<<< Loader L23531>>>

ë[B"ò8
bÿ
ÜÄp ¸¬

Board: TF7700 [29-bit mode]


U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **

** Unable to use usb 0:1 for fatload **
## Booting image at 85000000 ...
Bad Magic Number
## Booting image at 80060000 ...
Image Name: Linux-2.6.32.46_stm24_0209
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1854960 Bytes = 1.8 MiB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192
.168.178.63:192.168.178.1:192.168.178.1:255.255.25 5.0:tf7700:eth0ff mem=128m c
oprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwad
dr:00:3e:9e:d9:04:25 - 0x00000000 - 0 ...

INIT: version 2.86 booting
init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
Mounting local filesystems...
Cleaning /tmp.
Hostname: tf7700.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
copLoadFile (file /b
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
sh: !=0: unknown operand
sh: !=0: unknown operand
sh: !=0: unknown operand
showSinglePic /boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
insmod: can't insert '/lib/modules/tffp.ko': File exists
fsck.jfs version 1.1.15, 04-Mar-2011
processing started: 5/25/2012 728

/dev/sda3 is mounted and the file system is not type JFS.

WARNING!!!
Running jfs_fsck on a mounted file system
or on a file system other than JFS
may cause SEVERE file system damage.

Do you really want to continue (y/n)?

ich will gerne yes sagen aber wie

[fotomek69]

ko hat doch per putty geklapt danke

[fotomek69]

jetz habe ich neügestartet habe wieder das selbe problem

[BPanther]

Ich würde an der Stelle nicht "ja" sagen wollen, denn das dürfte in diesem Fall fatal enden. Die Warnung steht nicht umsonst oben da. Gemountete Dateisysteme sollte man nicht mit Gewalt überprüfen wollen, zumindest nicht, wenn eine Korrektur von Fehlern dabei vorgesehen ist. Hier muß man erstmal das Dateisystem unmounten, dann kann man das auch überprüfen lassen.
ABER: In diesem Fall darf garnicht erst die Überprüfung stattfinden, zumindest nicht mit jfs_fsck, denn das kann garnichts mit dem Dateisystem anfangen - siehe Meldung.

[fotomek69]

wenn ich y schreibe geth es weiter reciver startet normal weiter aber nach neüstart komt der fehler wieder
warum keine ahnun das ist das neue image ich habe nicht verendert

[SweetMP4]

Lade dir die "Settings" aus etc/enigma2 mit einen FTP-Programm runter und
öffne die Settings mit einen Linuxtauglichen Editor und schmeiß den Eintrag mit der EMU raus und
speicher die Datei wieder zurück.
Dann startet der Receiver auch wieder.

Den Fehler hatte ich auch bis mir einer erklärte das in der .emu Name gleich der binary sein muß.


Gruß SweetMP4...