Seite 5 von 22 ErsteErste ... 3456715 ... LetzteLetzte
Ergebnis 41 bis 50 von 220
  1. #41
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    kann ja bei der 912 nur über lan loggen wie ich das sehe ... richtig ?
    nö - kannst auch via rs232 machen!
    "Every Setback is a Set Up for a Comeback"


  2. #42
    Erfahrener Benutzer Avatar von wuschel
    Registriert seit
    11.10.2012
    Beiträge
    161
    Thanks
    25
    Thanked 50 Times in 23 Posts
    ja.... gerade gegoogelt mit dem kabel was ich net habe dachte ich bekomme es mit dem digitus hin.
    bestelle mir dann mal nen andere adapter *peinlich-peichlich*

    // oder hat einer ne löt / pin anleitung xD dann bau ich ihn mir eben
    Geändert von wuschel (28.11.2013 um 23:50 Uhr)


  3. #43
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    gibts bei bpanther (ist ja ein partnerboard)
    hab mir das ding aus 2 alten kabeln gelötet
    "Every Setback is a Set Up for a Comeback"


  4. #44
    Erfahrener Benutzer Avatar von wuschel
    Registriert seit
    11.10.2012
    Beiträge
    161
    Thanks
    25
    Thanked 50 Times in 23 Posts
    bin grad dabei rj11 hatte ich ja xD
    der rs habe ich gerade vom kumpel (danke toy) gerade abgeholt werde mir da mal was zusammen basteln und dir hoffentlich noch den log nachschieben


  5. #45
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    Perfekt - kann ich ja auch fürs Tool gebrauchen!
    Wenn man ernsthaft an der Box arbeitet braucht man RS232
    Lan-Log ist super - allerdings erst ab der ethernet Initialisierung!
    "Every Setback is a Set Up for a Comeback"


  6. #46
    Erfahrener Benutzer Avatar von wuschel
    Registriert seit
    11.10.2012
    Beiträge
    161
    Thanks
    25
    Thanked 50 Times in 23 Posts
    ich finde einfach keinen belegungsplan, meine stecker sind vergossen von dem 232 somit kann ich net schauen welche farbe auf welchen pin liegt messgerät nicht im hause ...


    // hatte jetzt den ersten versucht gemacht leider ohne output... setze mich morgen nochmal dran
    Geändert von wuschel (29.11.2013 um 01:35 Uhr)


  7. #47
    Best Betatester & VIP Avatar von Anskar
    Registriert seit
    08.05.2012
    Ort
    Thüringen am Fuße der Wartburg
    Beiträge
    6.107
    Thanks
    3.259
    Thanked 1.304 Times in 927 Posts
    2x Kathrein UFS 910/ 1x UFS 912/ 2x UFS 913 / Quad Plus / Samsung Galaxy S5

    >>>Hilfe zur Selbsthilfe: FAQ <<<




  8. #48
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    Die Kabel gibts bereits fertig (z.b. amazon) um ein paar Euro.
    Da musst dann nur zwei Kabel umschliessen (also nur Isolierung in der Mitte aufmachen und die zwei Kabel vertauschen) - das kannst mit nem Nagelzwicker machen
    "Every Setback is a Set Up for a Comeback"


  9. #49
    Erfahrener Benutzer Avatar von wuschel
    Registriert seit
    11.10.2012
    Beiträge
    161
    Thanks
    25
    Thanked 50 Times in 23 Posts
    so der log... hatte bpanter ausgewäht. und dann kam die bootschleife, wenn ich es richtig gelesen habe kommt die hdd nicht rechzeitig gehe ich da richtig in der annahme ?

    Code:
    #Log file from Morlys SH4 STB Admin Tool from: Sa Nov 30 2013, 19:52:47
    
    
    
    Board: STx7111-Mboard (MB618)  [32-bit mode]
    
    
    
    U-Boot 1.3.1 (Nov 30 2009 - 11:46:12) - stm23-2008-06-03
    
    DRAM:  256 MB
    NOR:    4 MB
    NAND:  128 MiB
    In:    serial
    Out:   serial
    Err:   serial
    Serial 3 Intialized
    buad = 19200, p2 val = 1109, t = c9, buadrate = 1
    buad = 19200, p2 val = 1109, t = c9, buadrate = 3ee
    VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD using PIC
    Test Class : GetInstance()
    Test Class : GetInstance()
    RawBuffer.cpp at RawBuffer ,29
    FD = 0
    Test Class : GetInstance()
    SWRecoveryHandler.cpp at Recover ,56
    No Recovery Needed
    End of testCpp
    Hit any key to stop autoboot:  0 
    
    Loading from nand0, offset 0x0
       Image Name:   Linux-2.6.32.59_stm24_0211
       Created:      2013-11-27  21:08:57 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1883156 Bytes =  1.8 MB
       Load Address: 80801000
       Entry Point:  80802000
    Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 
    ethaddr = 00:50:FD:FF:00:00
    new Params = console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 stmmaceth=ethaddr:00:50:FD:FF:00:00
    ## Booting image at 84000000 ...
       Image Name:   Linux-2.6.32.59_stm24_0211
       Created:      2013-11-27  21:08:57 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1883156 Bytes =  1.8 MB
       Load Address: 80801000
       Entry Point:  80802000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ...  START = 499192
     END = 31481
    OK
    
    Starting kernel console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 stmmaceth=ethaddr:00:50:FD:FF:00:00 - 0x00000000 - 0 ...
    
    
    INIT: version 2.86 booting
    
    init frontpanel
    Mount /dev in tmpfs
    Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    Starting autofs
    Mounting local filesystems...
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    Cleaning /tmp.
    Disabled by multiboot#             busybox mount -n -t jffs2 -o rw /dev/mtdblock3 /boot
    Hostname: UFS912.
    fp_control: SW Version 1.03
    Model: ufs912
    vBoxType: 10
    Selected Model: Kathrein UFS912 frontpanel control utility
    init
    checkConfig
    configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
    , WAKEUPDECREMENT  300
    init stmfb
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    seeking to 0
    seeking to 5e00
    seeking to 12460
    seeking to 1ab60
    seeking to 154300
    seeking to 154338
    seeking to 154370
    seeking to 191a58
    seeking to 191a60
    seeking to 191a68
    seeking to 191a70
    seeking to 1aae40
    seeking to 1aaf00
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    seeking to 0
    seeking to 60980
    seeking to 148478
    seeking to 1484b0
    seeking to 1484e8
    seeking to 158858
    seeking to 158864
    seeking to 158880
    seeking to 184d94
    seeking to 186e00
    init embx
    init AVS
    skip mpeg2
    insmod: can't insert '/lib/modules/smartcard.ko': No such file or directory
    starting telnetd
    
    Model: ufs912
    vBoxType: 10
    Input device name: "TDT RC event driver"
    Selected Remote: Kathrein UFS912 RemoteControl
    RemoteControl Map:
                   MEDIA - D5 - 226
                 ARCHIVE - 46 - 361
                    MENU - 54 - 139
                     RED - 6D - 398
                   GREEN - 6E - 399
                  YELLOW - 6F - 400
                    BLUE - 70 - 401
                    EXIT - 55 - 102
                    TEXT - 3C - 388
                     EPG - CC - 365
                  REWIND - 21 - 168
             FASTFORWARD - 20 - 208
                    PLAY - 38 - 207
                   PAUSE - 39 - 119
                  RECORD - 37 - 167
                    STOP - 31 - 128
                 STANDBY - 0C - 116
                    MUTE - 0D - 113
               CHANNELUP - 1E - 104
             CHANNELDOWN - 1F - 109
                VOLUMEUP - 10 - 115
              VOLUMEDOWN - 11 - 114
                    HELP - 81 - 138
                    INFO - 0F - 358
                      OK - 5C - 352
                      UP - 58 - 103
                   RIGHT - 5B - 106
                    DOWN - 59 - 108
                    LEFT - 5A - 105
                 0BUTTON - 00 -  11
                 1BUTTON - 01 -   2
                 2BUTTON - 02 -   3
                 3BUTTON - 03 -   4
                 4BUTTON - 04 -   5
                 5BUTTON - 05 -   6
                 6BUTTON - 06 -   7
                 7BUTTON - 07 -   8
                 8BUTTON - 08 -   9
                 9BUTTON - 09 -  10
    Frontpanel Map:
                FP_MEDIA - 80 - 226
               FP_ON_OFF - 01 - 116
                FP_MINUS - 04 - 108
                 FP_PLUS - 02 - 103
                 FP_TV_R - 08 - 352
    Supports Long KeyPress: 1
    processComplex >
    period 10, delay 120
    Using period=10 delay=120
    [SEM] DOWN
    Starting FTP server: vsftpd.
    Mounting local filesystems...
    starting e2->
    [set_was_timer_wakeup] no timer aktiv
    Simple mixer control 'HDMI',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Simple mixer control 'Analog',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Simple mixer control 'SPDIF',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Deconfiguring network interfaces... /DuckBA/tools/GUI.init: cd: line 32: can't cd to /DuckBA/bootitems
    tools/eplayer2.c >
    Output
    mode 1920, 1080, 32
    stride = 7680, width 1920
    15360k video mem
    [playback/playback.c:PlaybackOpen] URI=file:///boot/bootvideo.mkv
    [container/text_srt.c:Command] 
    
    [container/text_srt.c:SrtGetSubtitle] 
    [container/text_srt.c:SrtGetSubtitle] file: /boot/bootvideo.mkv
    [container/text_srt.c:SrtGetSubtitle] folder: /boot
    [container/text_srt.c:SrtGetSubtitle] ext: mkv
    [container/text_srt.c:SrtGetSubtitle] basename: bootvideo
    [container/text_srt.c:SrtGetSubtitle] /boot/bootvideo
    /boot | bootvideo | mkv
    [container/text_srt.c:SrtGetSubtitle] <
    [container/text_srt.c:Command] ret = 0
    [container/text_ssa.c:Command] 
    [container/text_ssa.c:SsaGetSubtitle] 
    [container/text_ssa.c:SsaGetSubtitle] file: /boot/bootvideo.mkv
    [container/text_ssa.c:SsaGetSubtitle] folder: /boot
    [container/text_ssa.c:SsaGetSubtitle] ext: mkv
    [container/text_ssa.c:SsaGetSubtitle] basename: bootvideo
    [container/text_ssa.c:SsaGetSubtitle] /boot/bootvideo
    /boot | bootvideo | mkv
    [container/text_ssa.c:SsaGetSubtitle] <
    [container/text_ssa.c:Command] ret = 0
    [container/container_ass.c:container_ass_init] >
    [container/container_ass.c:container_ass_init] width 1920, height 1080, share 1, fd 3
    [ass] Fontconfig disabled, only default font will be used.
    container/container.c::Command
    container/container.c::selectContainer
    Selected Container: FFMPEG
    [container/container_ffmpeg.c:container_ffmpeg_init] >
    [container/container_ffmpeg.c:container_ffmpeg_init] filename file:///boot/bootvideo.mkv
    [container/container_ffmpeg.c:container_ffmpeg_init] avformat_open_input failed -2 (file:///boot/bootvideo.mkv)
    [container/container_ffmpeg.c:container_ffmpeg_init] Cause: No such file or directory
    done.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... showSinglePic /boot/bootlogo.mvi
    VIDEO_SELECT_SOURCE MEMORY (Success)
    VIDEO_PLAY (Success)
    VIDEO_CONTINUE: (Success)
    VIDEO_CLEAR_BUFFER: (Invalid argument)
    done.
    KEY: 6C - DOWN
    ****         9998 1 ****
    [SEM] UP
    KEY_PRESS - 6c 1
    ++++            0 ms ++++
    KEY: 6C - DOWN
    ****          109 1 ****
    ++++           23 ms ++++
    KEY_RELEASE - 6c 00 1 1 CAUSE=Timeout
    ----          132 ms ----
    [SEM] DOWN
    KEY: 160 - OK
    ****         1123 2 ****
    [SEM] UP
    KEY_PRESS - 160 2
    ++++            0 ms ++++
    KEY: 160 - OK
    ****          104 2 ****
    ++++           27 ms ++++
    KEY_RELEASE - 160 00 2 2 CAUSE=Timeout
    ----          131 ms ----
    [SEM] DOWN
    Terminated
    killall: infobox: no process killed
    PYTHONPATH: /usr/lib/enigma2/python
    
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    STMFB accel interface available
    
    + (9) GFBDC
    15360k total video mem
    7260k usable video mem
    5640kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 2880)
    + (9) gLCDDC
    eDBoxLCD::eDBoxLCD >
    Error loading config file!
    
    LCD resolution: -1 x -1 x -438444568 (stride: 1128547395)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "TDT RC event driver" is a remotecontrol
    failed to open /dev/input/event1
    Input device "" is a mouse
    failed to open /dev/input/event2
    Input device "" is a remotecontrol
    failed to open /dev/input/event3
    Input device "" is a remotecontrol
    Found 4 input devices.
    + (22) Hdmi CEC driver
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0: reset requested
    CI Slot 1: reset requested
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    cannot open /proc/stb/tsmux/input2
    cannot open /proc/stb/tsmux/input3
    done, found 2 common interface slots
    + (35) CA handler
    + (36) Stream server
    [SERVERSOCKET] ERROR on bind() (Address already in use)
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryEPlayer3
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    
    INIT: Switching to run
    INIT: Sending processes the TERM signal
    
    Sending all processes the TERM signal...done.
    Sending all processes the KILL signal...done.
    Deactivating swap...umount: tmpfs busy - remounted read-only
    swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
    done.
    Unmounting local filesystems...umount: tmpfs busy - remounted read-only
    done.
    Rebooting... 
    
    Board: STx7111-Mboard (MB618)  [32-bit mode]
    
    
    U-Boot 1.3.1 (Nov 30 2009 - 11:46:12) - stm23-2008-06-03
    
    DRAM:  256 MB
    NOR:    4 MB
    NAND:  128 MiB
    In:    serial
    Out:   serial
    Err:   serial
    Serial 3 Intialized
    buad = 19200, p2 val = 1109, t = c9, buadrate = 1
    buad = 19200, p2 val = 1109, t = c9, buadrate = 3ee
    VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD using PIC
    Test Class : GetInstance()
    Test Class : GetInstance()
    RawBuffer.cpp at RawBuffer ,29
    FD = 0
    Test Class : GetInstance()
    SWRecoveryHandler.cpp at Recover ,56
    No Recovery Needed
    End of testCpp
    Hit any key to stop autoboot:  0 
    
    Loading from nand0, offset 0x0
       Image Name:   Linux-2.6.32.59_stm24_0211
       Created:      2013-11-27  21:08:57 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1883156 Bytes =  1.8 MB
       Load Address: 80801000
       Entry Point:  80802000
    Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 
    ethaddr = 00:50:FD:FF:00:00
    new Params = console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 stmmaceth=ethaddr:00:50:FD:FF:00:00
    ## Booting image at 84000000 ...
       Image Name:   Linux-2.6.32.59_stm24_0211
       Created:      2013-11-27  21:08:57 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1883156 Bytes =  1.8 MB
       Load Address: 80801000
       Entry Point:  80802000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ...  START = 499200
    
     END = 31481
    OK
    
    Starting kernel console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 stmmaceth=ethaddr:00:50:FD:FF:00:00 - 0x00000000 - 0 ...
    
    
    INIT: version 2.86 booting
    
    init frontpanel
    Mount /dev in tmpfs
    Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    Starting autofs
    Mounting local filesystems...
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    Cleaning /tmp.
    Disabled by multiboot#             busybox mount -n -t jffs2 -o rw /dev/mtdblock3 /boot
    Hostname: UFS912.
    fp_control: SW Version 1.03
    Model: ufs912
    
    vBoxType: 10
    Selected Model: Kathrein UFS912 frontpanel control utility
    init
    checkConfig
    configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
    , WAKEUPDECREMENT  300
    init stmfb
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    seeking to 0
    seeking to 5e00
    seeking to 12460
    seeking to 1ab60
    seeking to 154300
    seeking to 154338
    seeking to 154370
    seeking to 191a58
    seeking to 191a60
    seeking to 191a68
    seeking to 191a70
    seeking to 1aae40
    seeking to 1aaf00
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    seeking to 0
    seeking to 60980
    seeking to 148478
    seeking to 1484b0
    seeking to 1484e8
    seeking to 158858
    seeking to 158864
    seeking to 158880
    seeking to 184d94
    seeking to 186e00
    init embx
    init AVS
    skip mpeg2
    insmod: can't insert '/lib/modules/smartcard.ko': No such file or directory
    starting telnetd
    
    Model: ufs912
    vBoxType: 10
    Input device name: "TDT RC event driver"
    Selected Remote: Kathrein UFS912 RemoteControl
    RemoteControl Map:
                   MEDIA - D5 - 226
                 ARCHIVE - 46 - 361
                    MENU - 54 - 139
                     RED - 6D - 398
                   GREEN - 6E - 399
                  YELLOW - 6F - 400
                    BLUE - 70 - 401
                    EXIT - 55 - 102
                    TEXT - 3C - 388
                     EPG - CC - 365
                  REWIND - 21 - 168
             FASTFORWARD - 20 - 208
                    PLAY - 38 - 207
                   PAUSE - 39 - 119
                  RECORD - 37 - 167
                    STOP - 31 - 128
                 STANDBY - 0C - 116
                    MUTE - 0D - 113
               CHANNELUP - 1E - 104
             CHANNELDOWN - 1F - 109
                VOLUMEUP - 10 - 115
              VOLUMEDOWN - 11 - 114
                    HELP - 81 - 138
                    INFO - 0F - 358
                      OK - 5C - 352
                      UP - 58 - 103
                   RIGHT - 5B - 106
                    DOWN - 59 - 108
                    LEFT - 5A - 105
                 0BUTTON - 00 -  11
                 1BUTTON - 01 -   2
                 2BUTTON - 02 -   3
                 3BUTTON - 03 -   4
                 4BUTTON - 04 -   5
                 5BUTTON - 05 -   6
                 6BUTTON - 06 -   7
                 7BUTTON - 07 -   8
                 8BUTTON - 08 -   9
                 9BUTTON - 09 -  10
    Frontpanel Map:
                FP_MEDIA - 80 - 226
               FP_ON_OFF - 01 - 116
                FP_MINUS - 04 - 108
                 FP_PLUS - 02 - 103
                 FP_TV_R - 08 - 352
    Supports Long KeyPress: 1
    processComplex >
    period 10, delay 120
    Using period=10 delay=120
    [SEM] DOWN
    Starting FTP server: vsftpd.
    Mounting local filesystems...
    starting e2->
    [set_was_timer_wakeup] no timer aktiv
    Simple mixer control 'Analog',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Simple mixer control 'SPDIF',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Simple mixer control 'HDMI',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Deconfiguring network interfaces... /DuckBA/tools/GUI.init: cd: line 32: can't cd to /DuckBA/bootitems
    tools/eplayer2.c >
    Output
    mode 1920, 1080, 32
    stride = 7680, width 1920
    15360k video mem
    [playback/playback.c:PlaybackOpen] URI=file:///boot/bootvideo.mkv
    [container/text_srt.c:Command] 
    [container/text_srt.c:SrtGetSubtitle] 
    [container/text_srt.c:SrtGetSubtitle] file: /boot/bootvideo.mkv
    [container/text_srt.c:SrtGetSubtitle] folder: /boot
    [container/text_srt.c:SrtGetSubtitle] ext: mkv
    [container/text_srt.c:SrtGetSubtitle] basename: bootvideo
    [container/text_srt.c:SrtGetSubtitle] /boot/bootvideo
    /boot | bootvideo | mkv
    [container/text_srt.c:SrtGetSubtitle] <
    [container/text_srt.c:Command] ret = 0
    [container/text_ssa.c:Command] 
    [container/text_ssa.c:SsaGetSubtitle] 
    [container/text_ssa.c:SsaGetSubtitle] file: /boot/bootvideo.mkv
    [container/text_ssa.c:SsaGetSubtitle] folder: /boot
    [container/text_ssa.c:SsaGetSubtitle] ext: mkv
    [container/text_ssa.c:SsaGetSubtitle] basename: bootvideo
    [container/text_ssa.c:SsaGetSubtitle] /boot/bootvideo
    /boot | bootvideo | mkv
    [container/text_ssa.c:SsaGetSubtitle] <
    [container/text_ssa.c:Command] ret = 0
    [container/container_ass.c:container_ass_init] >
    [container/container_ass.c:container_ass_init] width 1920, height 1080, share 1, fd 3
    [ass] Fontconfig disabled, only default font will be used.
    container/container.c::Command
    container/container.c::selectContainer
    Selected Container: FFMPEG
    [container/container_ffmpeg.c:container_ffmpeg_init] >
    [container/container_ffmpeg.c:container_ffmpeg_init] filename file:///boot/bootvideo.mkv
    [container/container_ffmpeg.c:container_ffmpeg_init] avformat_open_input failed -2 (file:///boot/bootvideo.mkv)
    [container/container_ffmpeg.c:container_ffmpeg_init] Cause: No such file or directory
    done.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... showSinglePic /boot/bootlogo.mvi
    VIDEO_SELECT_SOURCE MEMORY (Success)
    VIDEO_PLAY (Success)
    VIDEO_CONTINUE: (Success)
    VIDEO_CLEAR_BUFFER: (Invalid argument)
    done.
    
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    STMFB accel interface available
    
    + (9) GFBDC
    15360k total video mem
    7260k usable video mem
    5640kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 2880)
    + (9) gLCDDC
    eDBoxLCD::eDBoxLCD >
    Error loading config file!
    
    LCD resolution: -1 x -1 x -438444568 (stride: 1128547395)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "TDT RC event driver" is a remotecontrol
    failed to open /dev/input/event1
    Input device "" is a mouse
    failed to open /dev/input/event2
    Input device "" is a remotecontrol
    failed to open /dev/input/event3
    Input device "" is a remotecontrol
    Found 4 input devices.
    + (22) Hdmi CEC driver
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0: reset requested
    CI Slot 1: reset requested
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    cannot open /proc/stb/tsmux/input2
    cannot open /proc/stb/tsmux/input3
    done, found 2 common interface slots
    + (35) CA handler
    + (36) Stream server
    [SERVERSOCKET] ERROR on bind() (Address already in use)
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryEPlayer3
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 115 channels/transponders and 1836 services
    scanning for frontends..
    opening frontend 0
    frontend successfully opened
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 8
    RTC not ready... wait for transponder time
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
    found 12 spinner!
    
    executing main
    setIoPrio best-effort level 3 ok
    Failed to open /dev/dbox/fp0
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    new Harddisk sdb -> /dev/sdb -> /dev/sdb
    [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sdb')
    [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sdb')
    main thread is non-idle! display spinner!
    Reading satellites.xml
    
    INIT: Switching to run
    INIT: Sending processes the TERM signal
    
    Sending all processes the TERM signal...done.
    Sending all processes the KILL signal...done.
    Deactivating swap...umount: tmpfs busy - remounted read-only
    swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
    done.
    Unmounting local filesystems...umount: tmpfs busy - remounted read-only
    done.
    Rebooting... 
    
    Board: STx7111-Mboard (MB618)  [32-bit mode]
    
    
    U-Boot 1.3.1 (Nov 30 2009 - 11:46:12) - stm23-2008-06-03
    
    DRAM:  256 MB
    NOR:    4 MB
    NAND:  128 MiB
    In:    serial
    Out:   serial
    Err:   serial
    Serial 3 Intialized
    buad = 19200, p2 val = 1109, t = c9, buadrate = 1
    buad = 19200, p2 val = 1109, t = c9, buadrate = 3ee
    VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD using PIC
    Test Class : GetInstance()
    Test Class : GetInstance()
    RawBuffer.cpp at RawBuffer ,29
    FD = 0
    Test Class : GetInstance()
    SWRecoveryHandler.cpp at Recover ,56
    No Recovery Needed
    End of testCpp
    Hit any key to stop autoboot:  0 
    
    Loading from nand0, offset 0x0
       Image Name:   Linux-2.6.32.59_stm24_0211
       Created:      2013-11-27  21:08:57 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1883156 Bytes =  1.8 MB
       Load Address: 80801000
       Entry Point:  80802000
    Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 
    ethaddr = 00:50:FD:FF:00:00
    new Params = console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 stmmaceth=ethaddr:00:50:FD:FF:00:00
    ## Booting image at 84000000 ...
       Image Name:   Linux-2.6.32.59_stm24_0211
       Created:      2013-11-27  21:08:57 UTC
       Image Type:   SuperH Linux Kernel Image (gzip compressed)
       Data Size:    1883156 Bytes =  1.8 MB
       Load Address: 80801000
       Entry Point:  80802000
       Verifying Checksum ... OK
       Uncompressing Kernel Image ...  START = 499223
    
     END = 31482
    OK
    
    Starting kernel console=ttyAS0,115200 root=/dev/mtdblock4 rw rootfstype=jffs2 init=/bin/devinit  coprocessor_mem=4m@0x40000000,4m@0x40400000 stmmaceth=ethaddr:00:50:FD:FF:00:00 - 0x00000000 - 0 ...
    
    
    INIT: version 2.86 booting
    
    init frontpanel
    Mount /dev in tmpfs
    
    Copying device nodes to /dev
    Starting portmap daemon....
    Loading autofs
    Starting autofs
    Mounting local filesystems...
    mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
    Cleaning /tmp.
    Disabled by multiboot#             busybox mount -n -t jffs2 -o rw /dev/mtdblock3 /boot
    Hostname: UFS912.
    fp_control: SW Version 1.03
    Model: ufs912
    vBoxType: 10
    Selected Model: Kathrein UFS912 frontpanel control utility
    init
    checkConfig
    configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
    , WAKEUPDECREMENT  300
    init stmfb
    LOADING MODULES
    load firmware
    copLoadFile (file /boot/audio.elf)
    ustslave: Kernel Version: 24
    base_address 0x40400000
    seeking to 0
    seeking to 5e00
    seeking to 12460
    seeking to 1ab60
    seeking to 154300
    seeking to 154338
    seeking to 154370
    seeking to 191a58
    seeking to 191a60
    seeking to 191a68
    seeking to 191a70
    seeking to 1aae40
    seeking to 1aaf00
    copLoadFile (file /boot/video.elf)
    ustslave: Kernel Version: 24
    base_address 0x40000000
    seeking to 0
    seeking to 60980
    seeking to 148478
    seeking to 1484b0
    seeking to 1484e8
    seeking to 158858
    seeking to 158864
    seeking to 158880
    seeking to 184d94
    seeking to 186e00
    init embx
    
    init AVS
    skip mpeg2
    insmod: can't insert '/lib/modules/smartcard.ko': No such file or directory
    starting telnetd
    Model: ufs912
    vBoxType: 10
    Input device name: "TDT RC event driver"
    Selected Remote: Kathrein UFS912 RemoteControl
    RemoteControl Map:
                   MEDIA - D5 - 226
                 ARCHIVE - 46 - 361
                    MENU - 54 - 139
                     RED - 6D - 398
                   GREEN - 6E - 399
                  YELLOW - 6F - 400
                    BLUE - 70 - 401
                    EXIT - 55 - 102
                    TEXT - 3C - 388
                     EPG - CC - 365
                  REWIND - 21 - 168
             FASTFORWARD - 20 - 208
                    PLAY - 38 - 207
                   PAUSE - 39 - 119
                  RECORD - 37 - 167
                    STOP - 31 - 128
                 STANDBY - 0C - 116
                    MUTE - 0D - 113
               CHANNELUP - 1E - 104
             CHANNELDOWN - 1F - 109
                VOLUMEUP - 10 - 115
              VOLUMEDOWN - 11 - 114
                    HELP - 81 - 138
                    INFO - 0F - 358
                      OK - 5C - 352
                      UP - 58 - 103
                   RIGHT - 5B - 106
                    DOWN - 59 - 108
                    LEFT - 5A - 105
                 0BUTTON - 00 -  11
                 1BUTTON - 01 -   2
                 2BUTTON - 02 -   3
                 3BUTTON - 03 -   4
                 4BUTTON - 04 -   5
                 5BUTTON - 05 -   6
                 6BUTTON - 06 -   7
                 7BUTTON - 07 -   8
                 8BUTTON - 08 -   9
                 9BUTTON - 09 -  10
    Frontpanel Map:
                FP_MEDIA - 80 - 226
               FP_ON_OFF - 01 - 116
                FP_MINUS - 04 - 108
                 FP_PLUS - 02 - 103
                 FP_TV_R - 08 - 352
    Supports Long KeyPress: 1
    processComplex >
    period 10, delay 120
    Using period=10 delay=120
    [SEM] DOWN
    Starting FTP server: vsftpd.
    Mounting local filesystems...
    starting e2->
    [set_was_timer_wakeup] no timer aktiv
    Simple mixer control 'Analog',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Simple mixer control 'SPDIF',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Simple mixer control 'HDMI',0
      Capabilities: pvolume pvolume-joined pswitch pswitch-joined
      Playback channels: Mono
      Limits: Playback -31 - 31
      Mono: Playback 12 [69%] [on]
    Deconfiguring network interfaces... /DuckBA/tools/GUI.init: cd: line 32: can't cd to /DuckBA/bootitems
    done.
    Setting up IP spoofing protection: rp_filter.
    Configuring network interfaces... tools/eplayer2.c >
    Output
    mode 1920, 1080, 32
    stride = 7680, width 1920
    15360k video mem
    [playback/playback.c:PlaybackOpen] URI=file:///boot/bootvideo.mkv
    [container/text_srt.c:Command] 
    [container/text_srt.c:SrtGetSubtitle] 
    [container/text_srt.c:SrtGetSubtitle] file: /boot/bootvideo.mkv
    [container/text_srt.c:SrtGetSubtitle] folder: /boot
    [container/text_srt.c:SrtGetSubtitle] ext: mkv
    [container/text_srt.c:SrtGetSubtitle] basename: bootvideo
    [container/text_srt.c:SrtGetSubtitle] /boot/bootvideo
    /boot | bootvideo | mkv
    [container/text_srt.c:SrtGetSubtitle] <
    [container/text_srt.c:Command] ret = 0
    [container/text_ssa.c:Command] 
    [container/text_ssa.c:SsaGetSubtitle] 
    [container/text_ssa.c:SsaGetSubtitle] file: /boot/bootvideo.mkv
    [container/text_ssa.c:SsaGetSubtitle] folder: /boot
    [container/text_ssa.c:SsaGetSubtitle] ext: mkv
    [container/text_ssa.c:SsaGetSubtitle] basename: bootvideo
    [container/text_ssa.c:SsaGetSubtitle] /boot/bootvideo
    /boot | bootvideo | mkv
    [container/text_ssa.c:SsaGetSubtitle] <
    [container/text_ssa.c:Command] ret = 0
    [container/container_ass.c:container_ass_init] >
    [container/container_ass.c:container_ass_init] width 1920, height 1080, share 1, fd 3
    [ass] Fontconfig disabled, only default font will be used.
    container/container.c::Command
    container/container.c::selectContainer
    Selected Container: FFMPEG
    [container/container_ffmpeg.c:container_ffmpeg_init] >
    [container/container_ffmpeg.c:container_ffmpeg_init] filename file:///boot/bootvideo.mkv
    [container/container_ffmpeg.c:container_ffmpeg_init] avformat_open_input failed -2 (file:///boot/bootvideo.mkv)
    [container/container_ffmpeg.c:container_ffmpeg_init] Cause: No such file or directory
    showSinglePic /boot/bootlogo.mvi
    done.
    VIDEO_SELECT_SOURCE MEMORY (Success)
    VIDEO_PLAY (Success)
    VIDEO_CONTINUE: (Success)
    VIDEO_CLEAR_BUFFER: (Invalid argument)
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    STMFB accel interface available
    
    + (9) GFBDC
    15360k total video mem
    7260k usable video mem
    5640kB available for acceleration surfaces.
    resolution: 720 x 576 x 32 (stride: 2880)
    + (9) gLCDDC
    eDBoxLCD::eDBoxLCD >
    Error loading config file!
    
    LCD resolution: -1 x -1 x -438444568 (stride: 1128547395)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "TDT RC event driver" is a remotecontrol
    failed to open /dev/input/event1
    Input device "" is a mouse
    failed to open /dev/input/event2
    Input device "" is a remotecontrol
    failed to open /dev/input/event3
    Input device "" is a remotecontrol
    Found 4 input devices.
    + (22) Hdmi CEC driver
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    CI Slot 0: reset requested
    CI Slot 1: reset requested
    CI Slot 0 setSource(0)
    CI Slot 1 setSource(0)
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    cannot open /proc/stb/tsmux/input2
    cannot open /proc/stb/tsmux/input3
    done, found 2 common interface slots
    + (35) CA handler
    + (36) Stream server
    [SERVERSOCKET] ERROR on bind() (Address already in use)
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryEPlayer3
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 115 channels/transponders and 1836 services
    scanning for frontends..
    opening frontend 0
    frontend successfully opened
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 2 demux, boxtype 8
    RTC not ready... wait for transponder time
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
    found 12 spinner!
    
    executing main
    setIoPrio best-effort level 3 ok
    Failed to open /dev/dbox/fp0
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    new Harddisk sdb -> /dev/sdb -> /dev/sdb
    [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sdb')
    [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sdb')
    main thread is non-idle! display spinner!
    Reading satellites.xml
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: simple
    diseqcmode:  single
    sec config completed
    
    INIT: Switching to run
    INIT: Sending processes the TERM signal
    
    Sending all processes the TERM signal...done.


  10. #50
    Moderator Avatar von morly
    Registriert seit
    15.07.2012
    Ort
    Österreich
    Beiträge
    6.684
    Thanks
    789
    Thanked 2.764 Times in 1.357 Posts
    glaub ich eher nicht, kannst mir mal deine bootargs posten?
    Und den Inhalt von DuckBA (Verzeichnis)
    "Every Setback is a Set Up for a Comeback"


Ähnliche Themen

  1. [Topf] Multiboot
    Von lordgandhi im Forum Anfänger/Newbie
    Antworten: 8
    Letzter Beitrag: 29.07.2013, 12:29
  2. [ufs912] Multiboot aber wie?
    Von Waechter40 im Forum Beta Enigma2 Bereich für alle SH4 STB
    Antworten: 6
    Letzter Beitrag: 03.02.2013, 13:36
  3. Plattenkonflikt: Multiboot auf SD und RECORD auf USB
    Von relanda im Forum Anfänger/Newbie
    Antworten: 8
    Letzter Beitrag: 28.01.2013, 18:19
  4. Multiboot von j00zek mit Spark
    Von Anskar im Forum Anfänger/Newbie
    Antworten: 40
    Letzter Beitrag: 13.08.2012, 10:58
  5. [spark] Multiboot
    Von Joker7 im Forum Beta Enigma2 Bereich für alle SH4 STB
    Antworten: 9
    Letzter Beitrag: 16.05.2012, 23:41

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •