HDMU_1233_E2_ipbox900_209_git_4781_nodebug_nolcd_D iff3_ffm_USB.tar.gz

[hairibo]

hi
this is my 1st visit im not sure if i am posting in the right place and i dont speak german so please bear with me.

i have installed the image on my 900hd ipbox on a 16gb usb stick and i am finding my way through it.
i dont have a great knowledge of e2 but can load images and ftp etc.

i was trying to install neutrino keymap for ipbox 900 from the plugins menu but i cant find where to install it.
it tells me that is is downloaded ok but i cannot find it.

also i have an external e-sata hdd connected but i am not sure how to get this working.
the hdd info only reads the usb stick

if anyone could help on these 2 problems i would be greatful

thanks
h

[santa]

If you install the neutrino keymap, you have only to reboot the box.
After that, you can switch the programs with up/down without using the channellist.

Your HDD must have the label RECORD, formated in ext(2,3 or4) and there a directory movie.

If you don't know how, please post the output of these in telnet:

blkid
fdisk -l

[hairibo]

thanks for the reply santa
i can see the channels change up/down but i had thought the plugin was a function to modify the behaviour of the buttons as in other images, i.e green button assigned to stop/start emu etc, but maybe that is somewhere else or not part of this image yet?

the telnet output reads

BusyBox v1.20.2 (2012-10-13 08:45:32 CEST) built-in shell (ash)

Enter 'help' for a list of built-in commands.



IPBOX900:~# blkid

/dev/sda1: LABEL="ext2" UUID="bcbd209f-c621-4ec1-9ffc-54b29a6d64e7" TYPE="ext2"

IPBOX900:~# fdisk -l



Disk /dev/sda: 16.0 GB, 16008609792 bytes

255 heads, 63 sectors/track, 1946 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes



Device Boot Start End Blocks Id System

/dev/sda1 1 1947 15633392 c Win95 FAT32 (LBA)

IPBOX900:~#
which to me says it is reading the usb stick
i have an e-sata hdd which i wanted to use for recordings but maybe ths is not possible and as i say i have a limited knowledge.
thanks
h
ps sorry 1 other quick question - does the scart out work at the same time as hdim output as i want to send picture to 2nd tv.

[santa]

Oh, images with the p209 kernel don't find sata hdds.
You need to install a p211 image, but this isn't in git a this time.
You can try to install an ipbox910 image, then post the output here, if this image will boot.

Emu you can only start/stop in hdmu center, softcam.

Hdmi and scary isn't really possible.
Only if you use 576p in Hdmi, but who wants that.

[Jule_666]

Vielleicht kann bpanther p211 ja noch für die 900er und 91 basteln. Läuft mit der 910 perfekt und die 9000er ja anscheinend auch...

[santa]

das habe ich ihn vor längeren schonmal gefragt, hat er noch nicht geschafft, werde ihn aber nochmal damit nerven.

[hairibo]

sorry guys Ich spreche kein Deutsch.

sorry i didnt mean in any way to be rude guys

[santa]

Sorry, but we only talk about how to fix your problem.

Have you try to install an ip910 image?

[hairibo]

yes im sorry i have install neutrinino 910 image and it booted ok but i couldnt get it to read disecq config for the 2 sats that i have 19.2e & 28.2e.
i was then going to try HDMU 910 image but i cannot get the usb stick formatted.

byy the way i forgot to mention that i have a 500gb usb hdd - is there any way i can use this to run the image and act as pvr hdd?
thx
h

[santa]

usb hdd isn´t a problem.
if you boot a flash image, you must format your stick with,

mkfs.ext2 -I 128 -b 4096 /dev/sda1

with fdisk /dev/sda
you have the possible to create more partitions, so you can faster and easier test images.

with p211 images, your sata drive must work.