USB HUb Problem

[tempuser]

Hello,

I'm using HDMU_1380_E2_spark_211_git_4961_nodebug_lcd_Diff0_ ffm_Flash on Amiko Alien 1, and I have a 4 port USb HUB. When I plug a usb stick in one of the ports, the box reads the stick and plays the media files on the stick. But, often, the usb sticks are not recognised, so, I need to reboot the image. 2 or 3 times. If I try to copy files via FTP to the thumb drives, it failes after a couple of seconds.

My question is: does enigma 2 support usb hubs, because, each image i've tested, it's the same dissapointing result.

They all work fine if the stick is conected directlly to the USB port.

Thank you.

[Joker7]

..... is the hub active, with own power supply?
... if not, test/use on active usb hub...

[tempuser]

The hub is powered through the usb port, so I guess this might be the problem. I'll just use one usb stick at a time, this seems to work fine. The HDMU image is the best, as far as I've tested. It would be a pity to let my experience be ruined by such a small issue. Again, thank you and congratulations for a wonderfull image.

[Mikam_0815]

Otherwise just give it a try with a powered USB HUB. I bought for example a cheap one from cnmemory (approx. 10€) and it works fine for me. I have attached 2 hard disks and the LCD (still wonder what I could attach to the remaining port of the hub ).