USB/Flash Anleitung

[morly]

wenns bei einem älteren Image auch zickt... was sagt das Log beim Kanalwechsel?

[prophaganda]

Mal ein Log von einem Wechsel von VOX auf Super-RTL

KEY by code: 6D - CHANNELDOWN **** 7192 1 ****
[SEM] UP
KEY_PRESS - 6d 1
++++ 0 ms ++++
playing 1:0:1:2F08:441:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:2F1C:441:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:2F1C:441:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
TuxTxt stopped service 47
cleaning up
KEY_RELEASE - 6d 00 1 1 CAUSE=Timeout
TuxTxt cache cleared
start release channel timer
getResolvedKey config.usage.remote_fallback failed !! (Typo??)
---- 183 ms ----
[SEM] DOWN
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:2F08:441:1:C00000:0:0:0:
eventNewProgramInfo 0 0
have 1 video stream(s) (00a5), and 1 audio stream(s) (0078), and the pcr pid is 00a5, and the text pid is 0041
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=165, apid=120
DMX_SET_PES_FILTER(0xa5) - pcr - ok
DMX_SET_PES_FILTER(0x78) - audio - failed (No such device)
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa5) - video - failed (No such device)
DMX_SET_PES_FILTER(0x41) - ttx - ok
TuxTxt cache cleared
TuxTxt: initialized
TuxTxt service started 41
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
TuxTxt running thread...(041)
[__evUpdatedInfo]
[writeChannelName]
vfd display text: SUPER RTL
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:1:2F08:441:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2F08:441:1:C00000:0:0:0:
19.10.2014 13:38:12 camd3: stop emm pid 03e9 caid 1833 ident 000000


19.10.2014 13:38:12 camd3: stop emm pid 03eb caid 1837 ident 000000


[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
19.10.2014 13:38:12 camd3: start emm pid 03e9 caid 1833 ident 000000


19.10.2014 13:38:12 camd3: start emm pid 03eb caid 1837 ident 000000


[__evUpdatedEventInfo]
RemovePopup, id = ZapError
use pmtpid 002d for service_id 2f08
eventNewProgramInfo 0 0
have 1 video stream(s) (00a5), and 1 audio stream(s) (0078), and the pcr pid is 00a5, and the text pid is 0041
decoder state: play, vpid=165, apid=120
[__evUpdatedInfo]
[writeChannelName]
vfd display text: SUPER RTL
[showCrypted]
[showDolby]

[showMp3]
[Dish] tuning failed
[__evUpdatedEventInfo]