pingulux was bleibt hängen auf dem Boot

[fastuco]

Hello anyone can help me? I did what the letter said GIULI was also written so in the manual, but nothing has changed I'm desperate throw?

[santa]

Try to create a serial log.

[fastuco]

how do you?

[santa]

serial cable between PC and BOX!
use putty, serial speed 115200

[fastuco]

this would be the procedure


How to Upgrade Uboot by RS232
Preparation:
1. Open [HyperTerminal] and set default parameters
Symbol rate: [1152000]
Data bits: [8]
Parity: [None]
Stop Bits: [1]
Data Flow Control: [None]


2. Select [Transfer / File Transfer] Option
3. Select [u-boot.bin] and use [Ymodem] Option, send file

[santa]

no, you don´t should send anything to the box yet, i want to see output from box
while booting

[fastuco]

ok thanks just come home I feel. Hello to you later

[fastuco]

Santa excuse me explain one last thing do start putty serial speed 115200 connect rs232 cable box and turn on the PC and box? and I have to do?

[santa]

PC on before

switch on the box, now you should see output from Box on your pc.

[fastuco]

Hello Santa this is what gives me PUTTY

PINGULUX PUTTY.JPG