Ergebnis 1 bis 2 von 2
  1. #1
    VIP Avatar von santa
    Registriert seit
    07.05.2012
    Beiträge
    7.844
    Thanks
    1.070
    Thanked 5.005 Times in 1.790 Posts

    Zusatzinformationen zu den Flashimages der 1028/AT7500

    Da wir in letzter Zeit auf den gst Player und noch ein paar andere Dinge gesetzt haben ist unser
    Image etwas größer geworden, somit ist die Box vom Speicher her an seine Grenzen gestoßen.

    Die Box hat aber noch einen ungenutzten Bereich den wir nun benutzen und somit wieder ein
    paar MB damit freigeben können, Aber Achtung, viel Platz ist trotzdem nicht vorhanden.


    Was müsst ihr dazu machen, wenn ihr Glück habt nur ein aktuelles Image flashen, also ab rev 10906.
    Mit Pech müsst ihr manuell den Bereich einmalig freigeben, dazu müsst ihr euch mit telnet auf die
    Box einloggen und folgendes eingeben:

    df -h

    das sollte dann so aussehen:
    Code:
    AT7500:~# df -hFilesystem Size Used Available Use% Mounted on
    /dev/root 44.4M 43.8M 568.0K 99% /
    tmpfs 57.0M 0 57.0M 0% /ram
    /dev/root 44.4M 43.8M 568.0K 99% /dev.static
    tmpfs 57.0M 0 57.0M 0% /dev
    tmpfs 57.0M 0 57.0M 0% /dev/shm
    tmpfs 57.0M 8.0K 57.0M 0% /tmp
    /dev/mtdblock2 6.9M 3.2M 3.6M 47% /boot
    wenn unten nur /dev/mtdblock2 steht und nur dann bitte dies eingeben:

    flash_eraseall -j /dev/mtd4

    dann sollte es so aussehen, bzw so sieht es auch aus wenn ihr nichts machen müsst:
    Code:
    AT7500:~# df -hFilesystem Size Used Available Use% Mounted on
    /dev/root 44.4M 40.0M 4.4M 90% /
    tmpfs 57.0M 0 57.0M 0% /ram
    /dev/root 44.4M 40.0M 4.4M 90% /dev.static
    tmpfs 57.0M 0 57.0M 0% /dev
    tmpfs 57.0M 0 57.0M 0% /dev/shm
    tmpfs 57.0M 4.0K 57.0M 0% /tmp
    /dev/mtdblock2 6.9M 3.2M 3.6M 47% /boot
    /dev/mtdblock4 6.9M 5.3M 1.6M 77% /media/internalswap
    Wenn ihr euch nicht sicher seit, dann bitte vorher fragen.
    mfg santa

    GigaBlue Quad Plus -->Yamaha AV Receiver-->Panasonic Plasma

    derzeit noch in Betrieb:
    IPBox 9000, Technisat Digicorder HDS2+, AT 500



  2. #2
    Neuer Benutzer
    Registriert seit
    23.03.2015
    Beiträge
    13
    Thanks
    6
    Thanked 3 Times in 3 Posts

    Octagon Error Codes (Err 0x..)

    Hallo, hab da was zur Info in einem anderen Forum gefunden, Nachtfalke. Wenn dies erlaubt ist, lasst es drin, Greetz.

    Error Codes (Err 0x..)


    Wenn es mal zu Komplikationen kommt werfen
    die Octagons in der Regel auf dem Frontdisplay einen Error-Code (Err 0x..) aus.

    Anhand dieser Liste könnt Ihr nachschauen was dieser heißt und was zu tun ist
    damit das System wieder einbahnfrei funktioniert:

    0x00 No Error - No Error
    0x01 Application Error - Error on Application sector Download s/w(*.ird) via Serial
    0x02 BlockXpress Error on releasing condensation - Check RAM and related circuit
    0x03 InvalidFlash - No supported Flash Memory
    0x04 Security Main BCB - Check security chip and related circuit on main board
    0x05 Security Front PCB - Check security chip and related circuit on front board
    0x10 SystemId Different System ID - Check System ID of s/w in receiver and that of a new s/w
    0x11 Range Overcapacity of downloading file - Delete useless language and secure capacity
    0x12 UartTimeOut Error on Serial communication - Close all the programs except download program in PC
    0x13 BlockCrc Error on downloaded s/w(*.ird) - Download s/w(*.ird) again
    0x14 DataType - No supported data type
    0x15 XfdVer - No supported s/w version
    0x20 OtaCancel Cancel OTA
    0x21 OtaTimeOut - OTA is not finnished within the time
    0x22 OtaCrc32 - Problem on OTA file
    0x23 OtaNoNIT[2]
    0x24 OtaNoSVC No locking with OTA TP - Check antenna cable connection
    0x25 OtaNoDSI[2]
    0x26 OtaNoDII[2]
    0x27 OtaNoDDB[2]
    0x28 OtaNewDSI[2]
    0x70 Kernel Kernel Error - Downlaod s/w(*.ird) again
    0x71 rootfs rootfs Error - Downlaod s/w(*.ird) again
    0x72 device fs Device file system error Downlaod s/w(*.ird) again
    0x80 FlashWriting Error during wrting on Flash Check Flash related circuit
    0x81 EepromWriting Error during wrting on Eeprom - Check Eeprom related circuit
    0x82 XfdmWriting IRD Write ERROR - Check Flash related circuit
    0x83 EepromReading Error on reading Eeprom - Check Eeprom related circuit
    0x90 USBNotFound Error on finding USB device - No supported USB device, change USB device
    0x91 USBFatReadErr Error on reading FAT in USB device - Format USB device with FAT
    0x92 USBFileFound Error on finding s/w (*.ird) in connected USB device
    - Check the existence of s/w (*.ird) in USB device
    0x93 USBReadErr Error on reading s/w(*.ird) in the connected USB device
    - Format USB device with FAT, copy s/w(*.ird) to the USB device, and then download it again
    0x94 USBDecompErr Error on reading s/w(*.ird) in the connected USB device
    - Format USB device with FAT, copy s/w(*.ird) to the USB device, and then download it again
    Geändert von et76 (14.10.2016 um 06:31 Uhr)

  3. The Following User Says Thank You to et76 For This Useful Post:



Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •