Problem with oscam

[frankyjones]

Hi,

When i zap, sometimes on hd chanels, the box block ans i have to reboot it.
It happens when oscam has a timeout on a hd chanel... do you have an idea?

thanks in advance,

[suchmich1983]

not if you dont provide more Infos! Whats your setup???

[frankyjones]

thanks for answer,

i have a GM spark triplex with the last hdmu image.
i have try without my NAS but same.
i use oscam without card inside.
i dont use epg yet and picons are on my usb key.
i use the swap but without swap its the same.

[TheChip]

For triplex you dont need swap, there is enough ram.

Oscam without card will not supportet!

[frankyjones]

ok i will remove swap and activate 1 card that i dont really need.
I think they are less freezes and lees reboot when activate my card but sometimes (3 or 4 times a day) i have to reboot.

This is my oscam.conf:

##################   General Instruction  -  oscam.conf ####################
#                                                                          #
#              per default no changes from the user are needed             #
#               but verify the IP-range oh your local Network              #
#                                                                          #
############################################################################
[global]
nice                          = -20
disablelog                    = 1
loghistorysize                = 200
logfile                       = /tmp/oscam.log
usrfile                       = /tmp/oscamuserfile






[monitor]
nocrypt                       = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo                = 1


[webif]
httpport                      = 5500
httpuser                      = root
httppwd                       = xxxx
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255


[dvbapi]
enabled             = 1
au                  = 1
decodeforever                 = 1
boxtype             = duckbox
user                = user
######   for E2 set pmt_mode = 0     ###########
######   for Titan set pmt_mode = 4  ###########
pmt_mode         = 0




########  end of file ########

[frankyjones]

I have less reboot but i need sometimes to reboot again...
Any idea?

[master--x]

That,s all from your config..??

take this..in your config global,,

[global]
logfile          = /var/log/oscam.log
nice             = -10
maxlogsize       = 150
waitforcards     = 1
preferlocalcards = 1

and delete decodeforever in your config please,,

Your Reader and user config post please ,,

[frankyjones]

Hello,

I'changed my config...and begin to test now but i still have crashes.

This is my user and reader config:


oscam.user :

[account]user = triplex
au = 1
group = 1

oscam.server :

[reader]
label = vps_cs378x
protocol = cs378x
device = XXXXXXXX
user = triplex
password = triplex
group = 1


[reader]
label = tsat_cs378x
protocol = cs378x
device = XXXXXXXX
user = XXXXX
password = XXXXX
services = good_telesat
caid = 0100
ident = 0100:000000,00006D
group = 1


[reader]
label = tntsat_internal
protocol = internal
device = /dev/sci0
services = good_tntsat
caid = 0500
detect = cd
mhz = 500
ident = 0500:FFF400,030B00
aeskeys = 0500@030B0XXXXXXXXXXXXXXXXXXXX
group = 2
ratelimitecm = 4
ratelimitseconds = 11

oscam.conf :

[global]
logfile = /var/log/oscam.log
nice = -10
maxlogsize = 150
waitforcards = 1
preferlocalcards = 1


[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1


[webif]
httpport = 5000
httpuser = XXXXXX
httppwd = XXXXXX
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = triplex
###### for E2 set pmt_mode = 0 ###########
###### for Titan set pmt_mode = 4 ###########
pmt_mode = 0

If i have a timeout and don't zap directly, i have the hdmu logo again and i need to reboot with putty...

Thanks again for your answer!

[frankyjones]

Nobady has an idea pliz?

[frankyjones]

I don't have this with a 800hd. 'don't understand...