Problem with oscam

[morly]

yes - you do not need the bootargs for logging
go to tab logging

if you want to see your bootargs answer with yes - then you'll see them, but your box will stop tv of remote control...

[frankyjones]

I think i found the problem of my box. i think it's hard and not soft because of the signal who fails under 50% and then thox box crahses

- - - Aktualisiert - - -

for reading the bootargs of the spark7162 you have to load an additional module.
Loading this module results in limited box functionality - so if you want to read the bootargs answer with yes otherwise with no.
For loggin you won't need bootargs - so say no and switch to the loggin tab

What's the additionnal module to install in the box to generate the log?

- - - Aktualisiert - - -

I can use the log now!
i see everything and i wait for a new crash

[morly]

no additional module needed for logging - please once more,
your bootargs are stored on a mtd partition which is not visible on the running e2 (HDMU).
after loading the i2s.ko module the partition is visible, bootargs can be read and written - but your box has limited functionality;
this is why I first ask if this module should be loaded or not...
So you get asked - saying yes loads this module until the next reboot - you don't have to do anything for it - the tool is assisting

[frankyjones]

ok thanks;

This is the last lines of my log when the box not crashes but is locked with logo who turns.

set sequence pos 3
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f5(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 1
(1)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(1)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x19ad300 running
[eEPGCache] channel 0x19ad300 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00a0), and 1 audio stream(s) (0052), and the pcr pid is 00a0, and the text pid is ffffffff
allocate demux
TuxTxt cache cleared
decoder state: play, vpid=160, apid=82
DMX_SET_PES_FILTER(0xa0) - pcr - ok
DMX_SET_PES_FILTER(0x52) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0xa0) - video - ok
VIDEO_PLAY - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
FE_GET_PROPERTY failed (Invalid argument)
FE_GET_PROPERTY failed (Invalid argument)
[__evUpdatedInfo]
[writeChannelName]
vfd display text: CANAL+ HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:2261:438:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:2261:438:1:C00000:0:0:0:
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] diff is 9
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 15:53:37
[eDVBLocalTimerHandler] m_time_difference is 9
[eDVBLocalTimerHandler] set Linux Time
PATready
use pmtpid 0500 for service_id 2261
eventNewProgramInfo 0 0
have 1 video stream(s) (00a0), and 3 audio stream(s) (0052, 0053, 0051), and the pcr pid is 00a0, and the text pid is ffffffff
decoder state: play, vpid=160, apid=82
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
FE_GET_PROPERTY failed (Invalid argument)
FE_GET_PROPERTY failed (Invalid argument)
[__evUpdatedInfo]
[writeChannelName]
vfd display text: CANAL+ HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCIInterfaces] gotPMT
sdt update done!
[__evUpdatedEventInfo]
[EPGC] start caching events(1372946019)
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1372946029)
[EPGC] stop caching events(1372946029)
[EPGC] next update in 60 min
HOTPLUG connection!
hotplug: ACTION=remove
complete ACTION=remove
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/virtual/bdi/0:16'}
HOTPLUG connection!
hotplug: ACTION=add
complete ACTION=add
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/virtual/bdi/0:16'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection!
hotplug: ACTION=remove
complete ACTION=remove
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/virtual/bdi/0:16'}
HOTPLUG connection!
hotplug: ACTION=add
complete ACTION=add
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/virtual/bdi/0:16'}
couldn't read model: [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
playing 1:0:19:2263:438:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:2261:438:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:2261:438:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok

VIDEO_STOP - main thread is non-idle! display spinner!

[frankyjones]

Box Ok, sometimes need a reboot but rarely!
thanks Morly and others!!