Hallo zusammen,
hatte schon in der Anleitung von der UFS 922 dieses Problem geschildert, jetzt mach Ich es noch etwas ausführlicher :-)
Ich hab meine Kathi komplett platt gemacht (Firmware komplett neu geflasht auf 2.10 und die Festplatte in den Rohzustand versetzt) dann Barry Allen 1.61 über MPI installiert und die neuste HDMU Firmware geflasht. Soweit so gut Barry Allen funktoniert, Orginal Firmware geht, HDMU geht nicht :-(
Ich habe den Bootvorgang über die Serielle Schnittstelle ausgelesen, werd da aber nicht wirklich schlau draus.
Kann mir evtl. jemand helfen ???
Danke schon mal im VorrausCode:Board: STb7100-Mboard (MB411) [29-bit mode] U-Boot 1.3.1 (Oct 21 2009 - 15:59:46) - stm23-2008-06-03 DRAM: 64 MB NOR: 16 MB In: serial Out: serial Err: serial Serial 3 Intialized VFD_Driver Init VFD_Controller Type : NEW Kathrein VFD using PIC Test Class : GetInstance() Test Class : GetInstance() RawBuffer.cpp at RawBuffer ,29 FD = 0 SWRecoveryHandler.cpp at Recover ,46 No Recovery Needed End of testCpp Hit any key to stop autoboot: 0 Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysare a=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 loglevel=1 ethaddr = 00:D0:55:04:A2:AD new Params = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=5632 coprocessor_mem=3m@0x04000000,3m@0x04300000 loglevel=1 stmmaceth=ethaddr:00:D0:5 5:04:A2:AD ## Booting image at 80040000 ... Image Name: Linux-2.6.23.17-MB411_7109-STSDK Created: 2009-12-08 23:40:22 UTC Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1820882 Bytes = 1.7 MB Load Address: 84601000 Entry Point: 84602000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=56 32 coprocessor_mem=3m@0x04000000,3m@0x04300000 loglevel=1 stmmaceth=ethaddr:00:D 0:55:04:A2:AD - 0x00000000 - 0 ... /etc/init.d/rcS running... Remounting root file system in read-write mode...mount: Can't find / in /etc/fst ab : Success mount: Mounting / on (null) failed: Success [FAILED] /etc/rcS.d/S200mountfs: /etc/rcS.d/S200mountfs: 91: cannot create /etc/mtab: Rea d-only file system mount: Can't find / in /etc/fstab : Success mount: Mounting / on (null) failed: Success Mounting other file systems... [ OK ] Bringing up the loopback interface... [ OK ] Setting up hostname...(none) [ OK ] Setup Ethernet HW Address... : skipped Setup Ramfs... : skipped Invoking Telnet Server... telnetd: '/bin/login' unavailable. Telnet Server Started... BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. /config/start.sh exists .... running /config/start.sh start Barry Allen ln: /var/ba/ba: File exists OK - booting 1 HDMU ------------------------------- rm: cannot remove `/var/standby.log': No such file or directory rm: cannot remove `/var/ba': No such file or directory calculated crc = 0x852c3fd7 ->read crc = 0x852c3fd7 calculated crc = 0x852c3fd7 ->read crc = 0x852c3fd7 Resô Board: STb7100-Mboard (MB411) [29-bit mode] U-Boot 1.3.1 (Oct 21 2009 - 15:59:46) - stm23-2008-06-03 DRAM: 64 MB NOR: 16 MB In: serial Out: serial Err: serial Serial 3 Intialized VFD_Driver Init VFD_Controller Type : NEW Kathrein VFD using PIC Test Class : GetInstance() Test Class : GetInstance() RawBuffer.cpp at RawBuffer ,29 FD = 0 SWRecoveryHandler.cpp at Recover ,46 No Recovery Needed End of testCpp Hit any key to stop autoboot: 0 Saving Environment to EEPROM... Reset IDE: Bus 0: OK Device 0: Model: WDC WD2500AVVS-73L2B0 Firm: 01.03A01 Ser#: W -DCWVA21567989 Type: Hard Disk Supports 48-bit addressing Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) 404 bytes read ## Executing script at a4900000 BarryAllen 0.8 bootargs Reset IDE: Bus 0: OK Device 0: Model: WDC WD2500AVVS-73L2B0 Firm: 01.03A01 Ser#: W -DCWVA21567989 Type: Hard Disk Supports 48-bit addressing Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) 1672383 bytes read Original bootargs = console=ttyAS0,115200 root=/dev/sda5 rw ip=192.168.178.11:19 2.168.178.1:192.168.178.1:255.255.255.0:kathrein:eth0:off mem=128m init=/bin/dev init coprocessor_mem=4m@0x10000000,4m@0x10400000 ethaddr = 00:D0:55:04:A2:AD new Params = console=ttyAS0,115200 root=/dev/sda5 rw ip=192.168.178.11:192.168.1 78.1:192.168.178.1:255.255.255.0:kathrein:eth0:off mem=128m init=/bin/devinit co processor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:A2:AD ## Error: environment overflow, "bootargs" deleted ## Booting image at a5000000 ... Image Name: Linux-2.6.32.46_stm24_0209 Created: 2013-07-01 11:10:19 UTC Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1672319 Bytes = 1.6 MB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel @à@@@ðË@ - 0x00000000 - 0 ...
Lg
Ralf