Gut, usb2serial-Adapter hab ich heute verliehen...
Hier der die Consolenausgabe:
Code:IPBOX910:~# setconsole IPBOX910:~# data[0] 0xe0, data[1] 0x1b 6C - DOWN pRead < 00A2006C **** 37379 6 **** [SEM] UP KEY_PRESS - 6c 6 ++++ 0 ms ++++ playing 1:0:19:283D:3FB:1:C00000:0:0:0: [eDVBCAService] free slot 0 demux 0 for service 1:0:19:2B66:3F3:1:C00000:0:0:0: [eDVBCAService] free service 1:0:19:2B66:3F3:1:C00000:0:0:0: data[0] 0xe0, data[1] 0xff decoder state: play, vpid=-1, apid=-1 DEMUX_STOP - pcr - ok DEMUX_STOP - video - ok VIDEO_STOP - KEY_RELEASE - 6c 00 6 6 CAUSE=Timeout ---- 151 ms ---- [SEM] DOWN ok AUDIO_STOP - ok DEMUX_STOP - audio - ok AUDIO_CONTINUE - ok DEMUX_STOP - ttx - ok TuxTxt stopped service 17f2 cleaning up TuxTxt cache cleared start release channel timer [__evStart] [__evSeekableStatusChanged] not pauseable. not pauseable. RemovePopup, id = ZapError [eDVBLocalTimerHandler] remove channel 0x1f7db38 [eEPGCache] remove channel 0x1f7db38 allocate channel.. 03fb:0001 (0)tune [prepare] UnicableTuningWord 0x996 [prepare] guard_offset 0 RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0 tuning to 1280 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0: allocate demux [SEC] invalidate current switch params set sequence pos 3 [SEC] setVoltage 2 [SEC] setTone 0 [SEC] sleep 20ms [SEC] sendDiseqc: e0105a0996(?) [SEC] sleep 50ms [SEC] setVoltage 1 [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 (0)fe event: status 1, inversion off, m_tuning 2 [SEC] sleep 500ms (0)fe event: status 1f, inversion off, m_tuning 3 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x2e559eb0 running [eEPGCache] channel 0x2e559eb0 running [EPGC] next update in 2 sec stop release channel timer ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0 allocate demux TuxTxt cache cleared decoder state: play, vpid=5101, apid=5102 DMX_SET_PES_FILTER(0x13ed) - pcr - ok DMX_SET_PES_FILTER(0x13ee) - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 1 - ok DMX_SET_PES_FILTER(0x13ed) - video - ok VIDEO_PLAY - ok DMX_SET_PES_FILTER(0x13f0) - ttx - ok TuxTxt cache cleared TuxTxt: initialized TuxTxt service started 13f0 VIDEO_CONTINUE - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok AUDIO_CONTINUE - ok disable teletext subtitles TuxTxt running thread...(13f0) [__evUpdatedInfo] [writeChannelName] vfd display text: Das Erste HD [showCrypted] [showDolby] [showMp3] [eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0: [__evUpdatedEventInfo] [__evUpdatedEventInfo] [__evUpdatedEventInfo] PATready no PAT entry found.. start delay FE_GET_PROPERTY failed (Invalid argument) ignore sdt update data.... incorrect transponder tuned!!! DVB service failed to tune - error 3 RemovePopup, id = ZapError AddPopup, id = ZapError [EPGC] start caching events(1377194053) crc32 failed! is 557f9163 [eDVBLocalTimerHandler] diff is 0 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time [eDVBLocalTimerHandler] not changed Timeout! [EPGC] abort non avail schedule other reading [EPGC] abort non avail netmed schedule reading [EPGC] abort non avail netmed schedule other reading [EPGC] abort non avail FreeSat schedule_other reading [EPGC] abort non avail viasat reading [EPGC] nownext finished(1377194061) [EPGC] schedule finished(1377194068) [EPGC] stop caching events(1377194068) [EPGC] next update in 60 min