Morly Tool help

[kaktuscar]

Hi,
Firstly, since I'm new I'd like to greet all members of the forum.
The reason I started the topic is because I'd like to ask you a question about a certain problem I have.
I own Kathrein receiver ufs 910 and TitaNit ver 1.32 in flash. I want to install an usb image like Enigma 2 on stick. I suppose that I need to format usb stick with the tool Create mini, with which I'd get one fat particion, with the name swap, and another three partitions Mini1, Mini2, Mini3.
I'd like to install usb image with Morly tool. I started the Morly tool and I've connected it with Kathi. I've seen it's interface and now, since I've never worked with this program, I'd appreciate if someone could explain me the process of installation step by step.
Seeing other options, I saw that it's quite dangerous to try to manipulate with the program that you don't know much about and could harm my box. Because of this I kindly ask for your help.

[ReWard]

You're welcome.

You can create the partitions also with the Tool.

Boot with TitaNit. Start the Tool, open the HDD/Images Tab and change to manage Partition. Here you can choose the numbers of partitions, apply and wait, that's the first step. Reboot the Box when it's done.

Go to Manage Images. Pherhaps you have to mount the partitions. Download your Image to your PC. Right click the partition you want to install to and chose Install Image. When it is ready you can right click the partition again and set this partition as default image. Restart again and the Image will start, after the configuration you can enjoy HDMU.

Better you write next time in the Tool thread, it is no problem writing english there. Perhaps a Mod will move us to it.

[kaktuscar]

Thank you for answering so fast
I need one swap partition in fat,because of the image in flash.Can i create it with Morly Tool and how?Another think how can i choose which image to boot?

[morly]

OK - start with the USB/Images Tab,
change to "Manage Partitions"

There choose your device and then the number of partitions (e.g 4).
Then apply the changes.
Next make right click on the first part and say: "create swap part"

Thats it!

Choosing what image to boot:
when you turn on the box you'll see "Kathrein UFS 910" - after 1 second you can choose the image to boot with the cursor up/down of your RC.

But just post your bootargs, I will then explain it in more detaill

[kaktuscar]

OK - start with the USB/Images Tab,
change to "Manage Partitions"

There choose your device and then the number of partitions (e.g 4).
Then apply the changes.
Next make right click on the first part and say: "create swap part"

Thats it!

Choosing what image to boot:
when you turn on the box you'll see "Kathrein UFS 910" - after 1 second you can choose the image to boot with the cursor up/down of your RC.

But just post your bootargs, I will then explain it in more detaill

Thank you for your reply.





Sorry for re writing this comment a few times, I really have no exprerience with this program, so everything about it is new to me.

[morly]

in the bootargs tab below find: "Bootargs..."
there you can save them (as .txt file) - please do so and attach the file here

second: I need a screenshot of the HDD/Images Tab

[kaktuscar]

I'm sorry, since I don't know how to attach a txt file on forum, I just copy pasted it.
#Bootargs Morly's SH4 STB Admin Tool from: Sat Oct 5 2013
boot_param_version=22
bootdelay=1
gateway=192.168.1.254
bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000
autoload=n
filesize=fba2
fileaddr=A4000000
bootcmd=bootm a0030000
stdin=serial
stdout=serial
stderr=serial
ipaddr=192.168.1.65
gatewayip=192.168.1.254
serverip=192.168.1.67
netmask=255.255.255.0
ethaddr=00:1d:ec:00:71:37

[ReWard]

You can open the Box to answer in an advanced mode, when you klick the Erweitert (advanced) button below. There you find the button to attach (Anhänge). And if not attached, please write the pasted text in a code box (#).

bootarg

Morly and I told you how to create the partitons. There you also can select the filesystem by right click. I think that's easy and logical. Why didn't you do that?

How to choose the boot image, I told you before, ...set as defauld image, or the way during the start, as morly told.

[kaktuscar]

I made a wrong move which you can see on the screenshot. Now I can't manipulate with the particions till I don't solve this problem, which I don't know how.

[ReWard]

What's your problem? Delete the Partition and start new, perhabs you have to umount this swap part. Maybe you have to deactivate swap in the Flash Image.