Test-HDMU_11566_211_git5563

[gringo13]

Frühstückschnelltest:


Online-Installation O.K.
Fernbedienung O.K.
TV-Schauen O.K.
Videoschnipsel, welche von div. Usern hier eingestellt wurden:
Video-avi von "kip": O.K.
Video-avi von "dimis": Keine Pixelfehler, jedoch stockt es ein wenig.
Video-mkv von "suchmich": Weiterhin verpixelt. Läuft auf meinem Läppie auch nicht richtig.
HTTP-RTMP-RTSP-Streams O.K.

Edit: Installation mit Settingsübernahme. Ich weiß, soll man nicht machen......

[suchmich1983]

Video-mkv von "suchmich": Weiterhin verpixelt. Läuft auf meinem Läppie auch nicht richtig.

hab ich gestern noch auf meinem GM990 getestet, da liefs...

[Mopsi79]

Hi ,

also hier bleibt es nach normaler Installation über USB-Stick beim Startwizzard hängen.

enigma2_crash_946684898.log enigma2_crash_946684852.log


M.f.G Mopsi


P.S. Auch beim Online Update von der 11505 bleibt es beim Netzwerkwizzard hängen.

[gringo13]

hab ich gestern noch auf meinem GM990 getestet, da liefs...

Vielleicht hat meine Datei vom Download einen Schuß.......
Wenns bei Dir läuft, ists ja O.K.
Wieder ein Sieg.........

[flac]

Hallo,
hier mein Schnelltest.
Ich bekomme ob Onlineupdate oder Stick nach der Netzwerkkonfiguration mit bestätigen mit OK
jedesmal ein WS.
Da scheint eine FIFOList zu fehlen. Siehe Anhang.
Nach reboot kann man aber die Settings zurückspielen und das Image läuft.
Bei Aufruf der Plugins kommt die Fehlermeldung, das der Satfinder nicht inst werden kann. wegen der FIFOlist.
Außerdem wird nach der Konfiguration des Netzwerks, wo man mit OK bestätigt, in dem Fenster wo die Sekunden
runtergezählt werden keine Sekunden angezeigt sondern irgend was mit Projekt-Id-Version:enigma2.
Auch bei Aufruf der Plugins.

<?xml version="1.0" encoding="utf-8"?>
<HDMU>
    <enigma2>
        <crashdate>Sat Jan  1 01:01:51 2000</crashdate>
        <compiledate>Oct 20 2013</compiledate>
        <skin>skin.xml</skin>
        <sourcedate>Oct 20 2013</sourcedate>
        <rev>
            <=!=[=C=D=A=T=A=[
-----====== HDMU 11566 enigma2 Git 5563 ======-----
]=]=>
        </rev>
        <freespace>
            <=!=[=C=D=A=T=A=[
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root               122880     48212     74668  39% /
tmpfs                    58456         0     58456   0% /ram
/dev/root               122880     48212     74668  39% /dev.static
tmpfs                    58456         0     58456   0% /dev
tmpfs                    58456         0     58456   0% /dev/shm
tmpfs                    58456         8     58448   0% /tmp
/dev/mtdblock8            8192      3368      4824  41% /boot
]=]=>
        </freespace>
        <freeram>
            <=!=[=C=D=A=T=A=[
             total         used         free       shared      buffers
Mem:        116912        78560        38352            0            0
-/+ buffers:              78560        38352
Swap:            0            0            0
]=]=>
        </freeram>
        <version>3.0.0</version>
    </enigma2>
    <image>
        <stbmodel>ufs913</stbmodel>
        <kernelversion>
            <=!=[=C=D=A=T=A=[
Linux UFS913 2.6.32.59_stm24_0211 #1 PREEMPT Sun Oct 20 22:16:57 CEST 2013 sh4 GNU/Linux
]=]=>
        </kernelversion>
        <kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock9 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 panic=2 stmmaceth=ethaddr:00:00:00:00:00:00</kernelcmdline>
        <nimsockets>NIM Socket 0:</nimsockets>
        <imageversion>
            <=!=[=C=D=A=T=A=[
version=0350200905300000
]=]=>
        </imageversion>
        <imageissue>
            <!-- No such file or directory -->
        </imageissue>
    </image>
    <crashlogs>
        <enigma2crashlog>
            <=!=[=C=D=A=T=A=[
nection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
child has terminated
pipes closed
192.XXX
0.0.0.0
nameservers: [[192, XXX,XX 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, XXX, XX, 1], 'address': [192, XXX, XX, X]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, XXX, XX,X], 'up': True, 'mac': '00:XX:XX:XX:XX:XX', 'dhcp': False, 'bcast': [192, XXX,XX, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, XXX, XX, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 70(16)
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:01'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:02'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:00'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:03'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:04'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:05'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/mdio_bus/0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:07'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:08'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:06'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:09'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0a'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0a/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0b'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0b/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0c'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0c/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0d'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0d/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0e'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0e/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:0f'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:0f/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:10'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:11'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:12'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:13'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:14'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:16'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:15'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:17'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:18'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:19'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1a'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1a/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1b'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1b/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1c'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1c/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1d'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1d/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1e'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1e/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stmmaceth.0/0:1f'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/0:1f/device/model'
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x17310f8> >]
illegal flag wfBorder!
Timeout!
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x17310f8> >]
finished
code self.AdapterSetupEnd(self.selectedInterface)
getStepWithID: confdns
result: 3
Updating values in step 4
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Please configure or verify your Nameservers by filling out the required values.\nWhen you are ready press OK to continue.', 'displaytext': 'Configure nameservers', 'id': 'confdns', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': 'checklanstatusend', 'code_async': '', 'codeafter_async': u'self.checkNetwork()', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': <class 'Screens.NetworkSetup.NameserverSetup'>, 'args': None, 'type': 'ConfigList'}}
wizard text Konfigurieren Sie Ihre DNS-Server durch Ausfüllen der entsprechenden Werte.
Drücken Sie OK zum Fortfahren
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 4
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
setZPosition
showing config
wizard screen <class 'Screens.NetworkSetup.NameserverSetup'>
backup-list: [[192, XXX, XX, 1]]
clearConfigList <Components.ConfigList.ConfigList object at 0x172ca6c> <Components.ConfigList.ConfigList object at 0x172360c>
clearConfigList <Components.ConfigList.ConfigList object at 0x172360c> <Components.ConfigList.ConfigList object at 0x172360c>
Now: 4
Now: 4
OK
finished
code self.checkNetwork()
[ePopen] command: ping -c 1 www.openpli.org
[ePopen] command: ping -c 1 www.google.nl
[ePopen] command: ping -c 1 www.google.com
illegal flag wfBorder!
Now: 4
child has terminated
pipes closed
child has terminated
pipes closed
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 40(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x17310f8> >]
getStepWithID: checklanstatusend
result: 4
getStepWithID: checklanstatusend
result: 4
Updating values in step 5
set LCD text
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Your receiver is now ready to use.\n\nYour internet connection is working now.\n\nPlease press OK to continue.', 'displaytext': 'Please follow the instructions on the TV', 'id': 'checklanstatusend', 'condition': u'self.condition = (self.InterfaceState == True )', 'timeoutaction': 'nextpage', 'nextstep': 'end', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': u'currStep = self.numSteps                                \nself.wizard[currStep]["nextstep"] = None\nself.markDone()\nself.close()', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Ihr Receiver ist jetzt konfiguriert.

Ihre Internetverbindung funktioniert nun.

Bitte OK drücken zum Fortfahren.
set LCD text
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 5
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
setZPosition
showing config
Now: 5
OK
finished
code currStep = self.numSteps                                
self.wizard[currStep]["nextstep"] = None
self.markDone()
self.close()
getStepWithID: end
result: 13
Updating values in step 14
wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Thank you for using the wizard.\nPlease press OK to continue.', 'id': 'end', 'condition': '', 'timeoutaction': 'nextpage', 'nextstep': None, 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'timeout': None, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Vielen Dank, dass Sie den Assistenten benutzt haben.
Drücken Sie OK zum Fortfahren.
code self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowdown
showing list, 14
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
self.list: <Components.Sources.List.List object at 0x172368c>
setZPosition
showing config
Now: 14
Now: 14
Reading  ['startwizard.xml']
Screen <class 'Screens.StartWizard.StartWizard'>((), {}): <type 'exceptions.ImportError'>
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 225, in create
    return screen(self, *arguments, **kwargs)
  File "usr/lib/enigma2/python/Screens/StartWizard.py", line 16, in __init__
  File "usr/lib/enigma2/python/Screens/WizardLanguage.py", line 7, in __init__
  File "usr/lib/enigma2/python/Screens/Wizard.py", line 169, in __init__
  File "usr/lib/python2.7/xml/sax/expatreader.py", line 107, in parse
  File "usr/lib/python2.7/xml/sax/xmlreader.py", line 123, in parse
  File "usr/lib/python2.7/xml/sax/expatreader.py", line 207, in feed
  File "usr/lib/python2.7/xml/sax/expatreader.py", line 301, in start_element
  File "usr/lib/enigma2/python/Screens/Wizard.py", line 100, in startElement
  File "<string>", line 1, in <module>
  File "usr/lib/enigma2/python/Screens/ScanSetup.py", line 2, in <module>
  File "usr/lib/enigma2/python/Screens/ServiceScan.py", line 6, in <module>
ImportError: No module named FIFOList
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/mytest.py", line 191, in processDelay
    callback(*retval)
  File "usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
  File "/usr/lib/enigma2/python/mytest.py", line 475, in runNextScreen
    session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
  File "/usr/lib/enigma2/python/mytest.py", line 294, in openWithCallback
    dlg.callback = callback
AttributeError: 'NoneType' object has no attribute 'callback'
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x14d502c>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]=]=>
        </enigma2crashlog>
    </crashlogs>
</HDMU>

Gruß

Chris

[bonkel]

ja da hat pli nen fehler reingebaut, deswegen wurd die nich kompiliert, somit nicht da..ist schon gefixt, mach nachher nen neues

[Anskar]

Das mit dem Erst-Assi und Netzwerkeinstellungen und WS wurde auch bei der UFS 910 berichtet.
Werde jetzt mal das USB_Image bei der UFS 912 testen.
Dürfte da dann wohl auch so sein.
MfG

[bonkel]

das is bei allen ab ufc960 - ufs922

[Anskar]

Dann hat sich der Test da wohl erledigt oder wird das durch die Übernahme der Einstellungen (mach ich ja immer) behoben?.
MfG

[flac]

@Anskar,
behoben wird das nicht, nur umgangen.
Bei Aufruf der Plugins wird eine Fehlermeldung angezeigt.
Oben steht ausserdem Projekt-Id-Version:enigma2.

Gruß

Chris