Beim verlassen des Media Centers schmiert das Image ab

[aufderhut]

Ich habe folgendes Image geflasht:HDMU_11607_E2_spark_211_git_5568_nodebug_mix_Flash
Um das Media Center zu verlassen drücke ich die Exit Taste und dann schmiert das Image mit Fehlerscreen ab und bootet dann neu. Wie kann ich das Media Center schließen ohne dass das Image abschmiert. Das Image läuft auf einem Pingulux.
Gruß
aufderhut

[morly]

hast ein log zur Hand?

[Dimis]

Das hatten wir mal..Gerade auch eben getestet..Ich benutze den MediaCenter fast überhaupt nicht...
Wenn ein Video abgespielt wird, dann passiert folgendes...Es wird Kein Tuner mehr gefunden oder die Box Startet einfach neu.

Ein Log folgt noch..Jetzt wird erst mal Formel1 angeschaut!

[aufderhut]

Hier ist ein log:

<?xml version="1.0" encoding="utf-8"?>
<HDMU>
    <enigma2>
        <crashdate>Mon Nov 18 09:40:16 2013</crashdate>
        <compiledate>Oct 28 2013</compiledate>
        <skin>kr_carbo-hd/skin.xml</skin>
        <sourcedate>Oct 28 2013</sourcedate>
        <rev>
            <!-- Cannot allocate memory -->
        </rev>
        <freespace>
            <!-- Cannot allocate memory -->
        </freespace>
        <freeram>
            <!-- Cannot allocate memory -->
        </freeram>
        <version>3.0.0</version>
    </enigma2>
    <image>
        <stbmodel>spark</stbmodel>
        <kernelversion>
            <!-- Cannot allocate memory -->
        </kernelversion>
        <kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock6 rootfstype=jffs2 rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 rw ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:LINUX7109:eth0:off bigphysarea=6000 stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:24:00:08:00:08:C9 Manufacture=Spark-Project STB_ID=09:00:08:00:00:08:C9</kernelcmdline>
        <nimsockets>NIM Socket 0:</nimsockets>
        <imageversion>
            <![CDATA[
version=0350200905300000
]]>
        </imageversion>
        <imageissue>
            <!-- No such file or directory -->
        </imageissue>
    </image>
    <crashlogs>
        <enigma2crashlog>
            <![CDATA[
move channel 0x1d0fdd8
allocate channel.. 0021:0085
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12480000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1880 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:20:21:85:C00000:0:0:0:
allocate demux
[EPGRefresh] Timer added <EPGRefreshTimerEntry (Mon Nov 18 01:11:35 2013, 0, <bound method EPGRefresh.refresh of <Plugins.Extensions.EPGRefresh.EPGRefresh.EPGRefresh instance at 0xe666cc>>)>
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1d0fdd8 running
[eEPGCache] channel 0x1d0fdd8 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (08ff), and 1 audio stream(s) (0900), and the pcr pid is 08ff, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=2303, apid=2304
DMX_SET_PES_FILTER(0x8ff) - pcr - ok
DMX_SET_PES_FILTER(0x900) - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x8ff) - video - ok
VIDEO_PLAY - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
[__evUpdatedInfo]
[writeChannelName]
vfd display text: Sonnenklar TV   
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:1:20:21:85:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:20:21:85:C00000:0:0:0:
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
RemovePopup, id = ZapError
[SEC] sleep 500ms
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 01:09:34
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
PATready
use pmtpid 0061 for service_id 0020
eventNewProgramInfo 0 0
have 1 video stream(s) (08ff), and 1 audio stream(s) (0900), and the pcr pid is 08ff, and the text pid is ffffffff
decoder state: play, vpid=2303, apid=2304
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
[__evUpdatedInfo]
[writeChannelName]
vfd display text: Sonnenklar TV   
[showCrypted]
[showDolby]
[showMp3]
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
AITready
sdt update done!
[EPGC] start caching events(1384733376)
[__evUpdatedEventInfo]
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1384733383)
[EPGC] schedule other finished(1384733386)
[EPGC] schedule finished(1384733386)
[EPGC] stop caching events(1384733386)
[EPGC] next update in 60 min
[EPGRefresh] Maybe zap to next service
[EPGRefresh] Done refreshing EPG
playing None
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:20:21:85:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:20:21:85:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
[DVBCAHandler] no more services
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1d0fdd8
[eEPGCache] remove channel 0x1d0fdd8
stop release channel timer
close frontend 0
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?
leave standby
playing 1:0:19:6EA5:4B1:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 04b1:0001
opening frontend 0
frontend successfully opened
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12421500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1821 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:6EA5:4B1:1:C00000:0:0:0:
allocate demux
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1f0ad80 running
[eEPGCache] channel 0x1f0ad80 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (157d), and 1 audio stream(s) (157e), and the pcr pid is 157d, and the text pid is 1580
allocate demux
decoder state: play, vpid=5501, apid=5502
DMX_SET_PES_FILTER(0x157d) - pcr - ok
DMX_SET_PES_FILTER(0x157e) - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x157d) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x1580) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
[__evUpdatedInfo]
[writeChannelName]
vfd display text: WDR HD Köln    
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:6EA5:4B1:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:6EA5:4B1:1:C00000:0:0:0:
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
RemovePopup, id = ZapError
[SEC] sleep 500ms
PATready
use pmtpid 157c for service_id 6ea5
[eDVBLocalTimerHandler] diff is -2
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 09:36:18
[eDVBLocalTimerHandler] m_time_difference is -2
[eDVBLocalTimerHandler] set Linux Time
eventNewProgramInfo 0 0
dvb subtitle  PID 1581 with wrong subtitling type (24)... force 0x10!!
have 1 video stream(s) (157d), and 3 audio stream(s) (157e, 157f, 1582), and the pcr pid is 157d, and the text pid is 1580
decoder state: play, vpid=5501, apid=5502
dvb subtitle  PID 1581 with wrong subtitling type (24)... force 0x10!!
[__evUpdatedInfo]
[writeChannelName]
vfd display text: WDR HD Köln    
[showCrypted]
[showDolby]
[showMp3]
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
[__evUpdatedEventInfo]
AITready
[EPGC] start caching events(1384763779)
crc32 failed! is bc1467cd

Timeout!
[__evUpdatedInfo]
[writeChannelName]
vfd display text: WDR HD Köln    
[showCrypted]
[showDolby]
[showMp3]
main thread is non-idle! display spinner!
ERROR reading section - Value too large for defined data type

ERROR reading PES (fd=51) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 51(8)
ERROR reading section - Value too large for defined data type

poll: unhandled POLLERR/HUP/NVAL for fd 54(8)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type

poll: unhandled POLLERR/HUP/NVAL for fd 32(8)
ERROR reading section - Value too large for defined data type

poll: unhandled POLLERR/HUP/NVAL for fd 33(8)
OCready
illegal flag wfBorder!
[EPGC] nownext finished(1384763805)
illegal flag wfBorder!
illegal flag wfBorder!
illegal flag wfBorder!
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[ePopen] command: ethtool eth0
illegal flag wfBorder!
child has terminated
pipes closed
[ePopen] command: ping -c 1 www.openpli.org
[ePopen] command: ping -c 1 www.google.nl
[ePopen] command: ping -c 1 www.google.com
poll: unhandled POLLERR/HUP/NVAL for fd 60(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 66(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 63(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 60(16)
[iStatus] killing self.WlanConsole
[NetworkBrowser] fallback to default translation for Close
[NetworkBrowser] fallback to default translation for Mounts management
[NetworkBrowser] fallback to default translation for Rescan
[NetworkBrowser] fallback to default translation for Expert
[NetworkBrowser] fallback to default translation for Press OK to mount!
illegal flag wfBorder!
[NetworkBrowser] fallback to default translation for Searching your network. Please wait...
[Networkbrowser] Loading network cache from  /etc/enigma2/networkbrowser.cache
[NetworkBrowser] fallback to default translation for Press OK to expand this host
[NetworkBrowser] fallback to default translation for Press OK to expand this host
[NetworkBrowser] fallback to default translation for Press OK to expand this host
[NetworkBrowser] fallback to default translation for Browse network neighbourhood
[NetworkBrowser] fallback to default translation for Press OK to expand this host
[NetworkBrowser] fallback to default translation for Press OK to expand this host
[Networkbrowser] Loading userinfo cache from  /etc/enigma2/NAS-SERVER.cache
[Networkbrowser] Loading userinfo from  /etc/enigma2/NAS-SERVER.cache
[NetworkBrowser] fallback to default translation for Press OK to collapse this host
[NetworkBrowser] fallback to default translation for Press OK to collapse this host
[NetworkBrowser] fallback to default translation for Press OK to collapse this host
[NetworkBrowser] fallback to default translation for Press OK to collapse this host
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:6EA5:4B1:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:6EA5:4B1:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[EPGC] schedule finished(1384763838)
[EPGC] stop caching events(1384763838)
[EPGC] next update in 60 min
[DVBCAHandler] no more services
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1f0ad80
[eEPGCache] remove channel 0x1f0ad80
stop release channel timer
warning, skin is missing element key_blue in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MC_VideoPlayer'>
warning, skin is missing element key_yellow in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MC_VideoPlayer'>
warning, skin is missing element key_red in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MC_VideoPlayer'>
accel alloc failed

ERROR: accelAlloc failed
close frontend 0
None
DVD Player error: 'NoneType' object has no attribute 'endswith'
/
/media/
/media/upnp/
/media/
/media/upnp/
/media/
/media/net/
/media/net/mntnas/
/media/net/mntnas/Filme/
unicode U+1b2d6e not present
unicode U+1b2d6e not present
unicode U+1b2d6e not present
/media/net/mntnas/Filme/

[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
RemovePopup, id = ZapError
playing 4099:0:0:0:0:0:0:0:0:0:/media/net/mntnas/Filme/Der unglaubliche Burt Wonderstone.avi
eServiceEPlayer3::construct!
main thread is non-idle! display spinner!
eServiceEPlayer3-<

[__evSeekableStatusChanged]
[__evStart]
[__evSeekableStatusChanged]
resolved to PLAY
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
main thread is non-idle! display spinner!
action: unPauseService
unpause
playingmain thread is non-idle! display spinner!
 None
eServiceEPlayer3::stop /media/net/mntnas/Filme/Der unglaubliche Burt Wonderstone.avi
getBouquet failed.. no path given!
[SKIN] Parsing embedded skin <embedded-in-'VideoPlayerSettings'>
unicode U+1b2d6e not present
[SKIN] Parsing embedded skin <embedded-in-'VideoPlayerSettings'>
unicode U+1b2d6e not present
unicode U+1b2d6e not present
unicode U+1b2d6e not present
/media/net/mntnas/
/media/net/
/media/
/
None
DVD Player error: 'NoneType' object has no attribute 'endswith'
Traceback (most recent call last):
  File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "usr/lib/enigma2/python/Plugins/Extensions/BMediaCenter/MC_VideoPlayer.py", line 174, in Exit
OSError: [Errno 2] No such file or directory: '/tmp/bmcmovie'
(PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x2fba46c>>,('MC_VideoPlayerActions', 'cancel')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
        </enigma2crashlog>
    </crashlogs>
</HDMU>

[santa]

Swap aktivieren

[aufderhut]

Reicht es unter System Control swap zu aktivieren?

[santa]

Nee, du brauchst schon eine partition dafür, sei es ein stick oder hdd.

[aufderhut]

@santa
Danke für deine Unterstützung
Ich habe jetzt einen Stick Ext4 formartiert und als SWAPFILE gelabelt (swap unter System Control ist akiviert), aber trotzdem trat der gleiche Fehler beim verlassen auf Image schmiert ab. Muss ich sonst noch irgendetwas einstellen. Log hänge ich mal an.[CODE]

<?xml version="1.0" encoding="utf-8"?>
<HDMU>
    <enigma2>
        <crashdate>Mon Nov 18 17:39:18 2013</crashdate>
        <compiledate>Oct 28 2013</compiledate>
        <skin>kr_carbo-hd/skin.xml</skin>
        <sourcedate>Oct 28 2013</sourcedate>
        <rev>
            <!-- Cannot allocate memory -->
        </rev>
        <freespace>
            <!-- Cannot allocate memory -->
        </freespace>
        <freeram>
            <!-- Cannot allocate memory -->
        </freeram>
        <version>3.0.0</version>
    </enigma2>
    <image>
        <stbmodel>spark</stbmodel>
        <kernelversion>
            <!-- Cannot allocate memory -->
        </kernelversion>
        <kernelcmdline>console=ttyAS0,115200 root=/dev/mtdblock6 rootfstype=jffs2 rw init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 rw ip=172.100.100.249:172.100.100.174:172.100.100.174:255.255.0.0:LINUX7109:eth0:off bigphysarea=6000 stmmaceth=msglvl:0,phyaddr:2,watchdog:5000 nwhwconf=device:eth0,hwaddr:24:00:08:00:08:C9 Manufacture=Spark-Project STB_ID=09:00:08:00:00:08:C9</kernelcmdline>
        <nimsockets>NIM Socket 0:</nimsockets>
        <imageversion>
            <=!=[=C=D=A=T=A=[
version=0350200905300000
]=]=>
        </imageversion>
        <imageissue>
            <!-- No such file or directory -->
        </imageissue>
    </image>
    <crashlogs>
        <enigma2crashlog>
            <=!=[=C=D=A=T=A=[
[WebInterface.registerBonjourService] No module named Bonjour.Bonjour
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[Skin] SKIN ERROR in SecondInfoBar: No module named DMCHDSmartInfo
illegal flag wfBorder!
warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
setValue 15
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
playing 1:0:1:6D67:437:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0437:0001
opening frontend 0
frontend successfully opened
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11953500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1353 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:6D67:437:1:C00000:0:0:0:
allocate demux
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 30, 1]]
read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 30, 23], 'up': True, 'mac': '24:00:08:00:08:c9', 'dhcp': True, 'bcast': [192, 168, 30, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 30, 1]}}
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1d0b8d8 running
[eEPGCache] channel 0x1d0b8d8 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00d2), and 1 audio stream(s) (00dc), and the pcr pid is 00d2, and the text pid is 00e6
allocate demux
decoder state: play, vpid=210, apid=220
DMX_SET_PES_FILTER(0xd2) - pcr - ok
DMX_SET_PES_FILTER(0xdc) - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xd2) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0xe6) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
[AutomaticVolumeAdjustment] service changed
[__evUpdatedInfo]
[writeChannelName]
vfd display text: 3sat            
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:1:6D67:437:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:6D67:437:1:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 00c8 for service_id 6d67
eventNewProgramInfo 0 0
have 1 video stream(s) (00d2), and 4 audio stream(s) (00dc, 00dd, 00de, 00e1), and the pcr pid is 00d2, and the text pid is 00e6
decoder state: play, vpid=210, apid=220
[__evUpdatedInfo]
[writeChannelName]
vfd display text: 3sat            
[showCrypted]
[showDolby]
[showMp3]
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
sdt update done!
AITready
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
[__evUpdatedEventInfo]
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 16:12:23
[eDVBLocalTimerHandler] m_time_difference is 438102612
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
[EPGC] 113654 events read from /hdd/epg.dat
[EPGC] next update in 2 sec
[EPGC] start caching events(1384787553)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1384787561)
[EPGC] schedule finished(1384787568)
[EPGC] stop caching events(1384787568)
[EPGC] next update in 60 min
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
hotplug: ACTION=remove
complete ACTION=remove
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/scsi_host/host0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/target0:0:0/0:0:0:0/block/sda'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/target0:0:0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/target0:0:0/0:0:0:0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/virtual/bdi/8:0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/host0/target0:0:0/0:0:0:0/block/sda/sda1'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'remove', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.1/usb_device/usbdev1.3'}
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
illegal flag wfBorder!
FONT 'Digital' MISSING!
Set OSD Transparacy failed
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[__evUpdatedEventInfo]
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] start caching events(1384791168)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1384791176)
[EPGC] schedule finished(1384791184)
[EPGC] stop caching events(1384791184)
[EPGC] next update in 60 min
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/scsi_host/host1'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/host1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/1-1.2/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/host1/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/usb_device/usbdev1.10'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/usbdev1.10/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/1-1.2:1.0/device/model'
HOTPLUG connection!
hotplug: ACTION=add
complete ACTION=add
HOTPLUG connection!
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/target1:0:0/1:0:0:0/scsi_disk/1:0:0:0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/1:0:0:0/device/model'
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
HOTPLUG connection!
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/target1:0:0/1:0:0:0/scsi_device/1:0:0:0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/1:0:0:0/device/model'
hotplug: ACTION=change
complete ACTION=change
hotplug: ACTION=add
complete ACTION=add
hotplug: ACTION=add
complete ACTION=add
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/target1:0:0/1:0:0:0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/1:0:0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/virtual/bdi/8:0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/8:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'change', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/target1:0:0/1:0:0:0'}
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/target1:0:0'}
couldn't read model:  [Errno 2] No such file or directory: '/sys/block/target1:0:0/device/model'
HOTPLUG connection lost!
hotplug: {'ACTION': 'add', 'PHYSDEVPATH': '-', 'DEVPATH': '/devices/platform/stm-usb.0/stm-ehci.0/usb1/1-1/1-1.2/1-1.2:1.0/host1/target1:0:0/1:0:0:0/block/sda'}
mountpoint /autofs/sda
description Storage Media
force_mounted True
scanning ('Storage Media', '/autofs/sda', <__main__.Session instance at 0x1c263cc>)
scanner: [<Scanner Ipkg>, <Scanner DVD>]
ignore /autofs/sda because its not accessible
[@] onPartitionChange add Partition(mountpoint=/autofs/sda,description=Storage Media,device=sda)
[@] DVD Inserted
new Harddisk sda -> /dev/sda -> /dev/sda
illegal flag wfBorder!
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:6D67:437:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:6D67:437:1:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[DVBCAHandler] no more services
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x1d0b8d8
[eEPGCache] remove channel 0x1d0b8d8
stop release channel timer
warning, skin is missing element key_blue in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MC_VideoPlayer'>
warning, skin is missing element key_yellow in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MC_VideoPlayer'>
warning, skin is missing element key_red in <class 'Plugins.Extensions.BMediaCenter.MC_VideoPlayer.MC_VideoPlayer'>
accel alloc failed

ERROR: accelAlloc failed
close frontend 0
/autofs/
/autofs/sda1/
/autofs/
/
/media/
/media/upnp/
/media/
/
None
DVD Player error: 'NoneType' object has no attribute 'endswith'
/
/media/
/media/upnp/
/media/
/media/hdd/
/media/hdd/Filme/
unicode U+1b2d6e not present
unicode U+1b2d6e not present
unicode U+1b2d6e not present
/media/hdd/Filme/xxxxxxxxxxxxx.avi
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
RemovePopup, id = ZapError
playing 4099:0:0:0:0:0:0:0:0:0:/media/hdd/Filme/xxxxxxxx.avi
eServiceEPlayer3::construct!
main thread is non-idle! display spinner!
eServiceEPlayer3-<

[__evSeekableStatusChanged]
getBouquet failed.. no path given!
getBouquet failed.. no path given!
[__evStart]
[__evSeekableStatusChanged]
resolved to PLAY
new service started! trying to download cuts!
download failed, no cuesheet interface
RemovePopup, id = ZapError
Setvolume: 10 10 (raw)
Setvolume: 57 57 (-1db)
setValue 10
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
setValue 15
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
setValue 45
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
setValue 15
Setvolume: 10 10 (raw)
Setvolume: 57 57 (-1db)
setValue 10
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
setValue 15
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
playing None
eServiceEPlayer3::stop /media/hdd/Filme/

getBouquet failed.. no path given!
unicode U+1b2d6e not present
Traceback (most recent call last):
  File "usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "usr/lib/enigma2/python/Plugins/Extensions/BMediaCenter/MC_VideoPlayer.py", line 174, in Exit
OSError: [Errno 2] No such file or directory: '/tmp/bmcmovie'
(PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x254af6c>>,('MC_VideoPlayerActions', 'cancel')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]=]=>
        </enigma2crashlog>
    </crashlogs>
</HDMU>

[santa]

Hast du nach dem aktivieren neu gebootet?

[aufderhut]

Hast du nach dem aktivieren neu gebootet?

Ja ich habe dann neu gebootet.