Oscam, Smargo, Sky V13

**TheChip** · 26.12.2013

Da der Topfield keinen USB Port hinten dran hat, fällt das aus. Wenn, kann der Reader nur vorn eingesteckt werden. Und mit etwas bastelgeschick kann man den auch nach intern verlegen. Das einzige Problem dann ist, das der USB port dann nach intern verlegt werden müsste, was dann wieder Probleme für Updates verursacht.

CI Module sind immer problematisch und CI+ Module laufen überhaupt nicht.

flattervogel · 26.12.2013

Oder Du baust Dir hinten noch einen Usb-Anschluss ein.So habe ich es gemacht.Mittlerweile nutze ich meine V13 Karte mit
intern eingebauten Kartenleser.
DSC01011.jpg DSC01013.jpg

**Grasdackel** · 27.12.2013

Der Topf hat ja unter der vorderen Klappe zwei CI-Steckplätze und oben drüber eine Soll-Bruch-Stelle für einen KArtenleser...gibts denn keine Kartenleser den ich INTERN verbauen kann? Ich mag so wenig wie möglich drauf drunter neben oder wo auch immer noch was da herum liegen haben....

flattervogel · 27.12.2013

Genau diese Sollbruchstelle habe ich geöffnet und mir einen Kartenleser von der Octagon 918 HD eingebaut(ist auf dem Foto schlecht zu erkennen)War ein bischen Bastelei,hat aber Spass gemacht.

**Grasdackel** · 12.01.2014

Hi
hab spasseshalber einfach nochmal alles angeschlosse und ohne eine einstellung zu ändern nochmal versucht. der log der oscam sieht nun folgendermaßen aus.

Code:

2014/01/12 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8523 (sh4-linux) 
2014/01/12 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3312 
2014/01/12 0 s services reloaded: 0 services freed, 19 services loaded, rejected 0 
2014/01/12 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 
2014/01/12 0 s signal handling initialized 
2014/01/12 0 s 1471 service-id's loaded in 48ms 
2014/01/12 0 s 912 provid's loaded 
2014/01/12 0 s skydev13 [mouse] creating thread for device /dev/ttyUSB0 
2014/01/12 0 s loadbalancer: can't read from file /tmp/.oscam/stat 
2014/01/12 0 s anti cascading disabled 
2014/01/12 546C98 c plain dvbapi-client granted (dvbapi, au=auto (12 reader)) 
2014/01/12 52BD50 h webif: decompressed 52163 bytes back into 150152 bytes 
2014/01/12 546C98 c Detected /dev/dvb/adapter0/demux0 Api: 0 
2014/01/12 52BD50 h HTTP Server listening on port 8888 
2014/01/12 545500 r skydev13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 
2014/01/12 546C98 c Found 0 ECMpids and 5 STREAMpids in PMT 
2014/01/12 546C98 c New program number: 445D (0000:445D unknown) [pmt_list_management 3] 
2014/01/12 545500 r skydev13 [mouse] card detected

kann damit jemand was anfangen?

**morly** · 12.01.2014

Hallo - mal was allgemeines: wie schon öfters angeregt bitte logs/... immer in eine CODE Umgebung schmeissen - machts übersichtlicher

- - - Aktualisiert - - -

hab das mal angepasst

**Grasdackel** · 21.01.2014

Hallo,
ich will ja echt nicht nerven...aber ohne Eure Hilfe komme ich nicht weiter....ich hab KEIN BILD.....zahle aber für mein Sky-Abo.

Bitte guckt euch nochmal meine Logs und Configs an...ich hab da echt keine Ahnung und bin auf euch angewiesen.

lg ICH

**santa** · 21.01.2014

der log ist zu kurz, das wichtigste fehlt
da steht das die karte erkannt wurde und das danach ist erst wichtig

**redoom** · 21.01.2014

häng mal deine kompletten configs hier an.

**Grasdackel** · 23.01.2014

oscam.conf

Code:

[global]Nice = -1
ClientTimeout = 7
FallbackTimeout=3
ClientMaxIdle=120
CacheDelay = 120
BindWait = 5
WaitForCards = 0
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
maxlogsize                    = 200






[monitor]
nocrypt                       = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo                = 1


[webif]
httpport                      = 8888
httpuser                      = root
httppwd                       = oscam
httpallowed                   = 127.0.0.1,192.168.0.0-192.168.255.255


[dvbapi]
enabled             = 1
au                  = 1
boxtype             = duckbox
user                = dvbapi
######   for E2 set pmt_mode = 0     ###########
######   for Titan set pmt_mode = 4  ###########
pmt_mode         = 0

oscam.dvbapi

Code:

##########   Sky Germany V13  ##################P: 09c4
I: 0

oscam.server

Code:

[reader]enable = 0
description = Set as HD plus HD01
Label = Intern_Upper_HD01
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 368
mhz = 368
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C


[reader]
enable = 0
description = Set as HD plus HD02
Label = Intern_Upper_HD02
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
cardmhz = 368
mhz = 368
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C


[reader]
enable = 0
description = Set as Sky S02
label    = Intern_Upper_S02
protocol = internal
device   = /dev/sci0
emmcache = 1,1,2
detect   = CD
group    = 1
caid = 1702
cardmhz = 600
mhz = 600


[reader]
enable                        = 0
description                   = Set as Sky V13          
label                         = Intern_Upper_V13
protocol                      = internal
device                        = /dev/sci0
caid                          = 09C4
boxid                         = 12345678
ins7e11                       = 15
detect                        = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz                           = 343
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,2
blockemm-unknown              = 1
ndsversion                    = 2


[reader]
enable                        = 0
description                   = Set as Sky V14          
label                         = Intern_Upper_V14
protocol                      = internal
device                        = /dev/sci0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = CD
# card not init. use other mhz 343,357,480,500 or 686....
mhz                           = 343
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,2
blockemm-unknown              = 1
ndsversion                    = 2


####################    External Readers / SMARGO   ########################
# Important !!!!      Use SMARGO Firmware 1.4 or 1.5                       #
# With regard to your Smartcard set up the Reader/Smargo as follows:       #
#                                                                          #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra                       #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0                        #
#                                                                          #
# For Irdeto, Betacrypt                                                    #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0                          #
#                                                                          #
# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz-     #
# Entries in the reader-Section                                            #
#                                                                          #                                                                         #
# For Nagra activate and complete the "rsakey = " and "boxkey = "  and     #
# and remove the # in the smargopatch = 1 line                             #
# example for HDplus is included                                           #
#                                                                          #
# for specific Smartcards such as TIGER or Viaccess with AES-Key           #
# see the OSCAM documentation                                              #
############################################################################


[reader]
enable = 0
description = Set as HD plus HD02
label = Extern_0_HD02
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
smargopatch = 1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
#mhz = 357
#cardmhz = 357


[reader]
enable = 0
description = Set as Sky S02
label = Extern_0_S02
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702
#mhz = 600
#cardmhz = 600


[reader]
enable = 1
description = skydev13
label = skydev13
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
group = 1
smargopatch = 1
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
emmcache = 1,3,2




[reader]
enable = 0
description = Set as Sky V14
label = Extern_0_V14
protocol = mouse
device = /dev/ttyUSB0
caid                          = 098C
boxid                         = 12345678
ins7e11                       = 15
detect                        = CD
group                         = 1
emmcache                      = 1,1,2
ndsversion                    = 2
#mhz                           = 357
#cardmhz                       = 357




#########################   Remote Readers    ##############################
# Important !!!!      Use this or not in personal responsibility           #
#                                                                                                                      #
#                                                                          #
# For further details see the OSCAM documentation                          #
############################################################################
[reader]
enable = 0
label        = cccam-reader
protocol     = cccam
device       = IP/dyndns,PORT
user         = USER
password     = PASS
group        = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11


[reader]
enable = 0
label    = camd35-reader
protocol = camd35
device   = IP/dyndns,PORT
user         = USER
password     = PASS
group    = 1
emmcache = 1,1,2


[reader]
enable = 0
label    = newcamd-reader
protocol = newcamd
key     = 0102030405060708091011121314
device   = IP/dyndns,PORT
user         = USER
password     = PASS
group    = 1
emmcache = 1,1,2

oscam.user

Code:

[account]user = dvbapi
pwd = dvbapi
group  = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702,1834.FFFF:1722

oscam log

Code:

2014/01/23 13:43:22 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8523 (sh4-linux) 
2014/01/23 13:43:22 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12150 
2014/01/23 13:43:22 0 s services reloaded: 0 services freed, 19 services loaded, rejected 0 
2014/01/23 13:43:22 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled 
2014/01/23 13:43:22 0 s signal handling initialized 
2014/01/23 13:43:23 0 s 1471 service-id's loaded in 58ms 
2014/01/23 13:43:23 0 s 912 provid's loaded 
2014/01/23 13:43:23 0 s skydev13 [mouse] creating thread for device /dev/ttyUSB0 
2014/01/23 13:43:23 0 s loadbalancer: can't read from file /tmp/.oscam/stat 
2014/01/23 13:43:23 0 s anti cascading disabled 
2014/01/23 13:43:23 546B70 c plain dvbapi-client granted (dvbapi, au=auto (12 reader)) 
2014/01/23 13:43:23 544218 h webif: decompressed 52163 bytes back into 150152 bytes 
2014/01/23 13:43:23 546B70 c Detected /dev/dvb/adapter0/demux0 Api: 0 
2014/01/23 13:43:23 544218 h HTTP Server listening on port 8888 
2014/01/23 13:43:23 52A490 r skydev13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357) 
2014/01/23 13:43:23 546B70 c Found 0 ECMpids and 4 STREAMpids in PMT 
2014/01/23 13:43:23 546B70 c New program number: 2EF4 (0000:2EF4 unknown) [pmt_list_management 3] 
2014/01/23 13:43:24 52A490 r skydev13 [mouse] card detected 
2014/01/23 13:43:27 52A490 r skydev13 [mouse] Error activating card. 
2014/01/23 13:43:35 0 --- Skipped 2 duplicated log lines --- 
2014/01/23 13:43:35 52A490 r skydev13 [mouse] card initializing error 
2014/01/23 13:46:04 546B70 c [ADD PID 0] CAID: 1702 ECM_PID: 1742 PROVID: 000000 
2014/01/23 13:46:04 546B70 c [ADD PID 1] CAID: 1833 ECM_PID: 1842 PROVID: 000000 
2014/01/23 13:46:04 546B70 c [ADD PID 2] CAID: 1836 ECM_PID: 1843 PROVID: 000000 
2014/01/23 13:46:04 546B70 c [ADD PID 3] CAID: 09C4 ECM_PID: 1B42 PROVID: 000000 
2014/01/23 13:46:04 546B70 c [ADD PID 4] CAID: 09AF ECM_PID: 1F42 PROVID: 000000 
2014/01/23 13:46:04 546B70 c [ADD PID 5] CAID: 098C ECM_PID: 1A42 PROVID: 000000 
2014/01/23 13:46:04 546B70 c Found 6 ECMpids and 5 STREAMpids in PMT 
2014/01/23 13:46:04 546B70 c New program number: 000A (Sky Cinema) [pmt_list_management 3] 
2014/01/23 13:46:04 546B70 c ERROR: Can't decode channel

Sollte ich etwas vergessen haben, bitte bescheid geben. danke

Thema: Oscam, Smargo, Sky V13

Themen-Optionen

Anzeige

The Following User Says Thank You to morly For This Useful Post:

Berechtigungen