Ergebnis 1 bis 10 von 10

Thema: Overclocking

  1. #1
    Benutzer
    Registriert seit
    28.11.2013
    Beiträge
    31
    Thanks
    2
    Thanked 1 Time in 1 Post

    Overclocking

    So i have noticed an overclock optio in the hdmu center. Can someone explain its use?im guessing it will speed up the box, but im afraid it could brick. Is it safe to try?


  2. #2
    VIP Avatar von zeini
    Registriert seit
    21.09.2012
    Beiträge
    858
    Thanks
    131
    Thanked 195 Times in 153 Posts
    Overclocking is at your own risk.


  3. #3
    Moderator Avatar von neipe
    Registriert seit
    06.05.2012
    Ort
    Kärntner
    Beiträge
    2.311
    Thanks
    1.040
    Thanked 773 Times in 527 Posts
    we do overclock since 3 years i think.
    and i dont know about,that any box was bricked or damaged by overclocking.

    so in my opinion its really save to try, you can try it step by step.

    with the fastest step its possible, that the box is freezing. so try this at last.

    --

    but zeinis comment is right, its at your own risk.
    SOLO2 mit HDMU
    SOLO4K leider mit VTI


  4. #4
    Benutzer
    Registriert seit
    28.11.2013
    Beiträge
    31
    Thanks
    2
    Thanked 1 Time in 1 Post
    ok ive set it to 710 (SH4), no noticeable increase in interface speed or anything like that. Is there a way for me to see what the effect is on my system?


  5. #5
    VIP Avatar von ReWard
    Registriert seit
    14.07.2012
    Beiträge
    3.860
    Thanks
    1.276
    Thanked 994 Times in 716 Posts
    Why do you want to OC your Box?

    If it is too slow, OC, and test if it will be better. When it dosn't change, there may be another Problem.


  6. #6
    Benutzer
    Registriert seit
    28.11.2013
    Beiträge
    31
    Thanks
    2
    Thanked 1 Time in 1 Post
    Zitat Zitat von ReWard Beitrag anzeigen
    Why do you want to OC your Box?

    If it is too slow, OC, and test if it will be better. When it dosn't change, there may be another Problem.

    Its absolutely unnecessary , but i'm always in for toying with settings and checking if things can get better


  7. #7
    Moderator Avatar von neipe
    Registriert seit
    06.05.2012
    Ort
    Kärntner
    Beiträge
    2.311
    Thanks
    1.040
    Thanked 773 Times in 527 Posts
    the best thing for measuring the speed from the box, is the boot time.
    you can stop the time with a clock

    with full speed the box should boot minimum 5 sec faster.
    the channel switching is a little bit faster.
    plugins are opening little faster.
    SOLO2 mit HDMU
    SOLO4K leider mit VTI


  8. #8
    Benutzer
    Registriert seit
    28.11.2013
    Beiträge
    31
    Thanks
    2
    Thanked 1 Time in 1 Post
    Ok these are the results of my tests on my sab triple unix ( i believe the box runs 450mhz without the hdmu image). The times measured are from turning the box on with the switch on the back untill getting an image on bbc1 (fta)

    540 (default)-> 1min 19sec
    630 ---------> 1min 15sec
    710 ---------> 1min 14sec
    775 ---------> 1min 13sec
    800----------> 1min 11sec

    So there is an 8 second difference between no overclock and full. Not an awfull lot


  9. #9
    Moderator Avatar von neipe
    Registriert seit
    06.05.2012
    Ort
    Kärntner
    Beiträge
    2.311
    Thanks
    1.040
    Thanked 773 Times in 527 Posts
    10% are better than nothing
    SOLO2 mit HDMU
    SOLO4K leider mit VTI


  10. #10
    Benutzer
    Registriert seit
    28.11.2013
    Beiträge
    31
    Thanks
    2
    Thanked 1 Time in 1 Post
    thats true . I'm going to leave it at the highest setting for a while.


Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •