HDMU_11809_E2_at7500_209_git_5570_nodebug_mix_USB
werden keine video einstellungen angezeigt beim ertassistent
Code:lose frontend 0 opening frontend 1 frontend successfully opened close frontend 1 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 30 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png found 12 spinner! executing main setIoPrio best-effort level 3 ok no profile data available main thread is non-idle! display spinner! Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... new Harddisk sda -> /dev/sda -> /dev/sda [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda') [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda') new Harddisk sdb -> /dev/sdb -> /dev/sdb Reading satellites.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 1 to slotid 1, descr Availink AVL2108 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: single slot: 1 configmode: simple diseqcmode: diseqc_a_b sec config completed [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl' [FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs) [FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age) [FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime) [FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement) 3660kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/valis_lcd.ttf...OK (Digital) [FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs) [FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' > Selected keymap does not exist! Activating language English [ePopen] command: ip -o addr show dev eth0 eDBoxLCD::getInstance [WebInterface] set language to en [WebInterface] set language to en [WebInterface] fallback to default translation for Webinterface [WebInterface] fallback to default translation for Configuration for the Webinterface [eSocketMMIHandler] created successfully getModeList for port Component getModeList for port Scart getModeList for port HDMI getModeList for port HDMI-PC hotplug on dvi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto setMode - port: Component mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: Component LINE # automatically generated by enigma 2 LINE [AutoMount.py] self.automounts without mounts {} [NetworkBrowser] fallback to default translation for NetworkBrowser [NetworkBrowser] fallback to default translation for Search for network shares [NetworkBrowser] fallback to default translation for MountManager [NetworkBrowser] fallback to default translation for Manage network shares adding Resource DiseqcTester resources: {'DiseqcTester': <function DiseqcTesterMain at 0x164ebfc>} starting hotplug handler [Toplevel.importExternalModules] Imported external module: Example [Webinterface].installCertificates :: Generating SSL key pair and CACert [Webinterface].installCertificates :: Signing SSL key pair with new CACert [Webinterface].installCertificates :: Installing newly generated certificate and key pair [HTTPRootResource}.__init__ [Webinterface] started on 0.0.0.0:80 auth=False ssl=False [WebInterface.registerBonjourService] No module named Bonjour.Bonjour [HTTPRootResource}.__init__ [Webinterface] started on 0.0.0.0:443 auth=True ssl=True [WebInterface.registerBonjourService] No module named Bonjour.Bonjour [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat' Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml'] getStepWithID: start result: nothing ('en_EN', ('English', 'en', 'EN')) ++++++++++++***++**** VideoWizard-createSummary Updating values in step 1 set LCD text wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV (or select a different input port).\n\nThe next input port will be automatically probed in 20 seconds.', 'displaytext': 'Select video input with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluation': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}} wizard text Video input selection Please press OK if you can see this page on your TV (or select a different input port). The next input port will be automatically probed in 20 seconds. set LCD text code self["portpic"].show() self.clearSelectedKeys() self.selectKey("OK") selectPic: arrowdown showing list, 1 self.list: <Components.Sources.List.List object at 0x167484c> self.list: <Components.Sources.List.List object at 0x167484c> self.list: <Components.Sources.List.List object at 0x167484c> self.list: <Components.Sources.List.List object at 0x167484c> self.list: <Components.Sources.List.List object at 0x167484c> self.list: <Components.Sources.List.List object at 0x167484c> setZPosition dynamic list, calling listInputChannels listInputChannels: [('Component', 'Component'), ('HDMI', 'HDMI'), ('HDMI-PC', 'HDMI-PC'), ('Scart', 'Scart')] self.selection: Component input selection moved: Component inputSelect: Component getModeList for port Component modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port Component and mode 720p getModeList for port Component ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: Component mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: Component [ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png ePixmap::setPixmapFromFile: loadPNG failed self.selection: Component input selection moved: Component inputSelect: Component getModeList for port Component modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port Component and mode 720p getModeList for port Component ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: Component mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: Component [ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png ePixmap::setPixmapFromFile: loadPNG failed self.selection: Component input selection moved: Component inputSelect: Component getModeList for port Component modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port Component and mode 720p getModeList for port Component ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: Component mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: Component [ePNG] couldn't open /usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/Component.png ePixmap::setPixmapFromFile: loadPNG failed showing config setPixmapNum(1) failed! defined pixmaps: [<enigma.gPixmapPtr; proxy of <Swig Object of type 'ePtr< gPixmap > *' at 0x16b2338> >] setValue 50 Setvolume: 50 50 (raw) Setvolume: 32 32 (-1db) child has terminated pipes closed [ePopen] command: route -n | grep eth0 child has terminated pipes closed child has terminated pipes closed poll: unhandled POLLERR/HUP/NVAL for fd 32(17) poll: unhandled POLLERR/HUP/NVAL for fd 35(17) poll: unhandled POLLERR/HUP/NVAL for fd 36(16) child has terminated pipes closed 192.168 0.0.0.0 nameservers: [[192, 168, 178, 1]] read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}} self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 57], 'up': True, 'mac': '00:1e:b8:04:19:b6', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}} poll: unhandled POLLERR/HUP/NVAL for fd 38(16) timeoutCounter: 19 timeoutCounter: 18 timeoutCounter: 17 timeoutCounter: 16 timeoutCounter: 15 timeoutCounter: 14 timeoutCounter: 13 timeoutCounter: 12 timeoutCounter: 11 timeoutCounter: 10 timeoutCounter: 9 timeoutCounter: 8 timeoutCounter: 7 timeoutCounter: 6 timeoutCounter: 5 timeoutCounter: 4 timeoutCounter: 3 timeoutCounter: 2 timeoutCounter: 1 timeoutCounter: 0 selection next item self.selection: HDMI input selection moved: HDMI inputSelect: HDMI getModeList for port HDMI modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port HDMI and mode 720p getModeList for port HDMI ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: HDMI mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: HDMI self.selection: HDMI input selection moved: HDMI inputSelect: HDMI getModeList for port HDMI modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port HDMI and mode 720p getModeList for port HDMI ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: HDMI mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: HDMI self.selection: HDMI input selection moved: HDMI inputSelect: HDMI getModeList for port HDMI modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port HDMI and mode 720p getModeList for port HDMI ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: HDMI mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: HDMI current: ('HDMI', 'HDMI') input selection moved: HDMI inputSelect: HDMI getModeList for port HDMI modeList: [('720p', ['50Hz', '60Hz']), ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']), ('1080i', ['50Hz', '60Hz']), ('576p', ['50Hz']), ('576i', ['50Hz'])] modes for port HDMI and mode 720p getModeList for port HDMI ('720p', ['50Hz', '60Hz']) ('1080p', ['60Hz', '50Hz', '23Hz', '30Hz', '29Hz', '24Hz', '25Hz']) ('1080i', ['50Hz', '60Hz']) ('576p', ['50Hz']) ('576i', ['50Hz']) setMode - port: HDMI mode: 720p rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto updateColor: HDMI down