booting problem whit the new verssion of HDMU11809

[darius]

HI
I have upgrade the new verssion on my barryallen on my kathrein 910 ,but it dose not boot and it bagan to load then go to kathrein ufs 910 then stop and nothing happen more.
what can man to do? I wait över 20 minutes and nothing . I have 2 other img. on usb and them works fine only on HDMU it dose not boot.
used to be it works whit all 3 img. but now works on only 2 but not whit HUMU img. !

[morly]

no way to help in this way.
1) post your bootargs
2) post the telnet output of: fdisk -l
3) if possible make a serial log of the starting phase

[darius]

no way to help in this way.
1) post your bootargs
2) post the telnet output of: fdisk -l
3) if possible make a serial log of the starting phase

but when it dose not boot I can not contact the box and get any information.
or should I get these info when I boot the box from the flash img.? or what?

- - - Aktualisiert - - -

this is log from fhas img.

6.0.0_tested_by_AAF_Team
BA Device found on /dev/sda1
######## BootMenu started ########
9600
UP - selected 2 AAF_Server_ufs-USBg
UP - selected 1 AAF_M15000_GST_USB_
UP - selected 0 Flash
OK - booting 0 Flash
-------------------------------
--------------------------------------------
Barry Allen V0.6 by gutemine
--------------------------------------------
from: 3 images boot: 3 named: HDMU_11809
--------------------------------------------


1
gotkey: 1
1
gotkey: 1
1
gotkey: 1
1
gotkey: 1


datei /tmp/ba/ba/Flash/data/logo.raw nicht gefunden
bootmenu ende \n
Target Image directory /data/baroot/ba/ba/Flash not found, continue booting Flash

- - - Aktualisiert - - -

what should i write on telenet command to get those information?

- - - Aktualisiert - - -

BusyBox v1.2.1 (2007.10.12-18:30+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.


# output of fdisk
/bin/sh: output: not found
# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:80:0F:11:70:00  
          inet addr:192.168.1.25  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:167 errors:0 dropped:0 overruns:0 frame:0
          TX packets:401 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:15565 (15.2 KiB)  TX bytes:110038 (107.4 KiB)


lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

- - - Aktualisiert - - -

# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/mtdblock2             640       424       216  66% /config
/dev/mtdblock6            3840      3408       432  89% /data
/dev/sda1               243064    153228     77292  66% /tmp/usb/XBA (1-1)
/dev/sda2               243096     60456    170092  26% /tmp/usb/XSYS2 (1-2)
/dev/sda3               243096     56828    173720  25% /tmp/usb/XSYS3 (1-3)
/dev/sda4               243096     81064    149484  35% /tmp/usb/XSYS4 (1-4)
/dev/sda4               243096     81064    149484  35% /tmp/mnttmp
#

- - - Aktualisiert - - -

# ps
  PID  Uid     VmSize Stat Command
    1 root        108 S   init       
    2 root            SW< [ksoftirqd/0]
    3 root            SW< [events/0]
    4 root            SW< [khelper]
    5 root            SW< [kthread]
   22 root            SW< [kblockd/0]
   25 root            SW< [khubd]
   27 root            SW< [kseriod]
   62 root            SW  [pdflush]
   63 root            SW  [pdflush]
   64 root            SW  [kswapd0]
   65 root            SW< [aio/0]
   94 root            SW< [ata/0]
   96 root            SW< [scsi_eh_0]
   99 root            SW  [mtdblockd]
  145 root            SW< [scsi_eh_1]
  146 root            SW< [usb-storage]
  150 root            SW< [pegasus]
  182 root            SWN [jffs2_gcd_mtd2]

[morly]

any reason why you don't use mini? OK - however

please boot any e2 image (aaf) or neutrino (bp),
then do via telnet:
fdisk -l

and don't forget the bootargs

[darius]

any reason why you don't use mini? OK - however

please boot any e2 image (aaf) or neutrino (bp),
then do via telnet:
fdisk -l

and don't forget the bootargs

I dont know what is mini . wher can i find informatin about mini?

AAF-ufs910:~# fdisk -l                                                   
                                                                         
Disk /dev/mtdblock0: 0 MB, 131072 bytes                                  
255 heads, 63 sectors/track, 0 cylinders                                 
Units = cylinders of 16065 * 512 = 8225280 bytes                         
                                                                         
Disk /dev/mtdblock0 doesn't contain a valid partition table  
Disk /dev/sda: 1028 MB, 1028653056 bytes                      
32 heads, 62 sectors/track, 1012 cylinders                    
Units = cylinders of 1984 * 512 = 1015808 bytes               
                                                              
   Device Boot      Start         End      Blocks  Id System  
/dev/sda1               1         253      250945  83 Linux   
/dev/sda2             254         506      250976  83 Linux   
/dev/sda3             507         759      250976  83 Linux   
                                                                         
Disk /dev/sdb: 16.2 GB, 16219373568 bytes                                
255 heads, 63 sectors/track, 1971 cylinders                              
Units = cylinders of 16065 * 512 = 8225280 bytes                         
                                                                         
 Disk /dev/sdb: 16.2 GB, 16219373568 bytes  
 255 heads, 63 sectors/track, 1971 cylinders 
Units = cylinders of 16065 * 512 = 8225280 bytes   
  Device Boot      Start         End      Blocks  Id System  
/dev/sdb1               1        1972    15839200+  c Win95 FAT32 (LBA)

- - - Aktualisiert - - -

mpfs                    23380        64     23316   0% /tmp             
mpfs                    23380        64     23316   0% /var/tmp         
mpfs                    23380        64     23316   0% /var/lock        
mpfs                    23380        64     23316   0% /var/run         
dev/root               243096     56828    173720  25% /media           
dev/root               243096     56828    173720  25% /root            
dev/root               243096     56828    173720  25% /usr/lib    
-sh: bootargs: not found                                                  
AAF-ufs910:~# bootargs   bootargs                                         
-sh: bootargs: not found                                                  
AAF-ufs910:~# 192.168.1.7                                                 
-sh: 192.168.1.7: not found                                               
AAF-ufs910:~# bootargs   -192.168.1.7                                     
-sh: bootargs: not found                               
/dev/root               243096     56828    
/dev/root               243096     56828    
/dev/root               243096     56828    
/dev/root               243096     56828    
/dev/root               243096     56828    
hon/Plugins                                 
/dev/sda1               243064    153228    
-sh: bootargs: not found                                                       
AAF-ufs910:~# 192.168.1.7                                                      
-sh: 192.168.1.7: not found                                                    
AAF-ufs910:~# bootargs   -192.168.1.7                                          
-sh: bootargs: not found                                                       
AAF-ufs910:~# df                                                               
Filesystem           1K-b



-sh: bootargs: not found                                                       
AAF-ufs910:~# 192.168.1.7                                                      
-sh: 192.168.1.7: not found                                                    
AAF-ufs910:~# bootargs   -192.168.1.7                                          
-sh: bootargs: not found                                                       
AAF-ufs910:~# df                                                               
Filesystem           1K-b

mpfs 23380 64 23316 0% /tmp 
mpfs 23380 64 23316 0% /var/tmp 
mpfs 23380 64 23316 0% /var/lock 
mpfs 23380 64 23316 0% /var/run 
dev/root 243096 56828 173720 25% /media 
dev/root 243096 56828 173720 25% /root 
dev/root 243096 56828 173720 25% /usr/lib 
-sh: bootargs: not found 
AAF-ufs910:~# bootargs bootargs 
-sh: bootargs: not found 
AAF-ufs910:~# 192.168.1.7 
-sh: 192.168.1.7: not found 
AAF-ufs910:~# bootargs -192.168.1.7 
-sh: bootargs: not found 
/dev/root 243096 56828 
/dev/root 243096 56828 
/dev/root 243096 56828 
/dev/root 243096 56828 
/dev/root 243096 56828 
hon/Plugins 
/dev/sda1 243064 153228 
-sh: bootargs: not found 
AAF-ufs910:~# 192.168.1.7 
-sh: 192.168.1.7: not found 
AAF-ufs910:~# bootargs -192.168.1.7 
-sh: bootargs: not found 
AAF-ufs910:~# df 
Filesystem 1K-b



-sh: bootargs: not found 
AAF-ufs910:~# 192.168.1.7 
-sh: 192.168.1.7: not found 
AAF-ufs910:~# bootargs -192.168.1.7 
-sh: bootargs: not found 
AAF-ufs910:~# df 
Filesystem 1K-b

[suchmich1983]

@darius
Please use "Quotes" and "CODE" Boxes if you post code ....
If you dont know how have a look to the FAQ...

Thanks and regards

[darius]

@darius
Please use "Quotes" and "CODE" Boxes if you post code ....
If you dont know how have a look to the FAQ...

Thanks and regards

I know to CODE , but dont see the icone for it ! it is only for Quotes which avelable on top for me.
meny thanks

[suchmich1983]

it is only visible when click "Go Advanced" in the lower right corner of the answer-box....

[morly]

OK - you can boot images from usb either using BA or mini(maxi) uboot.
BA is the older possibility which enables a Startmenu onscreen - but heavily outdated.
mini uboot is the much better choice

Please just use google - there are so many threads about it.

[TheChip]

@Darius: please do not fullquote when your answer is placed under the quotet answer.