Hdmu and ipbox9000

[blaska]

How to do that?

[santa]

fdisk -l

we have to see 320gb, then we can create partitions with fdisk, after that format that parts with mkfs.

[blaska]

After a hard reset the menu shows back the hard disk menu, showing correct size of the hdd. If i try to inicializate always say error mounting. Fdisk -l doesn't show real size.
I Will try another hard disk or will try with a pen drive.

[santa]

Put the HDD in a pc and format with any Tool.
After that try again in Box.

[blaska]

My pc is a laptop without sata ports.
On Morlys utility, where should I copy dll files for windows 7?

identical results with another hdd:

root@S400:~# fdisk -l


Disk /dev/sda: 524 MB, 524869632 bytes
189 heads, 61 sectors/track, 88 cylinders, total 1025136 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a5053


Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1023999 510976 83 Linux


Disk /dev/sdb: 4041 MB, 4041211904 bytes
64 heads, 32 sectors/track, 3854 cylinders, total 7892992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x30624145


Device Boot Start End Blocks Id System
/dev/sdb1 * 64 1327103 663520 17 Hidden HPFS/NTFS
/dev/sdb2 1329150 7890943 3280897 5 Extended
/dev/sdb5 1329152 7516159 3093504 83 Linux
/dev/sdb6 7518208 7890943 186368 82 Linux swap / Solaris
root@S400:~#

- - - Aktualisiert - - -

I run the image off a pen drive without too many issues!

If you have multi boot all is good...

This is how I created my pen drive boot.

I assume you have e2 in flash
You will need to be able to FTP your box, and use putty...

I use putty for the next bit.
User: root
Password: HDMU

To create a partition on the pen drive
mkfs,ext2 /dev/sdb1 -L ext2

Then copy your downloaded file into this directory via FTP transfer (tar.gz on this site)

Back to putty...to unpack the file
mount dev sdb1 /mnt/usb


Then use putty to unpack the file...

cd /mnt/usb

tar -vzxf *****.tar.gz (then the full name of the image)

then...
sync

remove the image using FTP if required.

Start your box using the correct key number on the remote. Set-up the image as per the instructions

Cheers

When I put the first comand I get this:

root@S400:~# mkfs,ext2 /dev/sdb1 -L ext2
-bash: mkfs,ext2: no se encontró la orden (command not found)

[santa]

the command is wrong, it should be mkfs.ext2 /dev...

Remove your hdd, put a usb stick on your Box and boot.

then show me fdisk -l

[blaska]

Hdd removed, atached 4Gb usb stick, power on box, fdisk:

root@S400:~# fdisk -l


Disk /dev/sda: 524 MB, 524869632 bytes
189 heads, 61 sectors/track, 88 cylinders, total 1025136 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a5053


Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1023999 510976 83 Linux


Disk /dev/sdb: 4041 MB, 4041211904 bytes
64 heads, 32 sectors/track, 3854 cylinders, total 7892992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x30624145


Device Boot Start End Blocks Id System
/dev/sdb1 * 64 1327103 663520 17 Hidden HPFS/NTFS
/dev/sdb2 1329150 7890943 3280897 5 Extended
/dev/sdb5 1329152 7516159 3093504 83 Linux
/dev/sdb6 7518208 7890943 186368 82 Linux swap / Solaris
root@S400:~#

- - - Aktualisiert - - -

root@S400:~# mkfs.ext2 /dev/sdb1 -L ext2
mke2fs 1.42.5 (29-Jul-2012)
Etiqueta del sistema de ficheros=ext2
OS type: Linux
Tamaño del bloque=4096 (bitácora=2)
Tamaño del fragmento=4096 (bitácora=2)
Stride=0 blocks, Stripe width=0 blocks
41472 inodes, 165880 blocks
8294 blocks (5.00%) reserved for the super user
Primer bloque de datos=0
Número máximo de bloques del sistema de ficheros=171966464
6 bloque de grupos
32768 bloques por grupo, 32768 fragmentos por grupo
6912 nodos-i por grupo
Respaldo del superbloque guardado en los bloques:
32768, 98304, 163840


Allocating group tables: hecho
Escribiendo las tablas de nodos-i: hecho
Escribiendo superbloques y la información contable del sistema de ficheros: hecho

If you need spanish to english translation let me now.

Then Ray said:
Then copy your downloaded file into this directory via FTP transfer (tar.gz on this site)witch destination directory should it go tar.gz file?

[santa]

fdisk -l
blkid
mount

[blaska]

root@S400:~# blkid
/dev/sdb6: UUID="a26b6819-829f-49a7-a6d0-b7e35ec5c4f1" TYPE="swap"
/dev/sda1: UUID="523e3d3e-8e8b-4c0e-bcf6-8ce0207d26be" TYPE="ext4"
/dev/sdb1: LABEL="ext2" UUID="41f5e7ac-c7ce-4459-be62-a9600e59ad6a" TYPE="ext2"
/dev/sdb5: UUID="1c449d43-6205-4d6f-91fa-095de646405a" TYPE="ext4"

root@S400:~# mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=58978,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode =000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=48188k,mode=755)
/dev/disk/by-uuid/1c449d43-6205-4d6f-91fa-095de646405a on / type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=133640k)
rpc_pipefs on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw,relatime)

[santa]

fdisk /dev/sdb

d (delete all parts)
6
d
5
d
2
d
1

n (create new part)
p (primary)
1 (first part)
1 or return
xxx (=max cylinder/4)

n
p
2
return
yyy

n
p
3
return
zzz

n
p
4
return
return

w

reboot
fdisk -l