[HELP]: Wrong u_boot into flash

[lolo909]

Hi Adionek,
Thank you for loader upload. Here is current status:
- loader L627 uploaded successfully
- original Openbox S6 HD firmware uploaded successfully
- tuner hangs during boot up from flash
- tuner hangs during boot up of HDMU from USB


Below are logs from putty.


Any suggestion what to do next? Is it hardware damage and I can't help with it anything else?

Loader upload

% Í(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
            system volume information/
   115230   openbox_s6_l627_r250200a0.ird
==> find ird  openbox_s6_l627_r250200a0.ird [115230 ] <==


1 file(s), 1 dir(s)


==> usb_loading start openbox_s6_l627_r250200a0.ird
reading openbox_s6_l627_r250200a0.ird
...........
ret=> 115230
Loader_Parser: index(0) addr[84000000] size(181224), resize(262144)
Loader_Parser: flash write etc[idx 0, addr 0, size (181224)]
Loader_WriteFlash size=0x2c3e8 offset=0xa0000000 data_start 84000000
..==> unprotect 0


.. done
==> erase firtst 0 last 1
..==> protect 0

tuner boots up from flash

%rTs     Ô(Re)start USB...
Front USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
Rear  USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
(Re)start USB...
Front USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
Rear  USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
stopping USB..


(Re)start USB...
Front USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
Rear  USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Can't read from device 0 **


** Unable to use usb 0:1 for fatload **
init started: BusyBox v1.14.2 (2012-03-12 15:08:37 KST)

tuner boots up from pendrive

%rTs     Ô(Re)start USB...
Front USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
 262144000   root.img
  3010445   uimage


2 file(s), 0 dir(s)


reading uImage
.....................................................................................................................................................................................................................................................................................................
ret=> 3010445
Wait [1]
Wait [2]
Wait [3]
Wait [4]
Wait [5]
Wait [6]
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted.
/mnt/root.img: clean, 5651/64000 files, 108927/256000 blocks
mount root
INIT: version 2.88 booting
init frontpanel
WAIT 1 min
mknod: /dev/avs: File exists
mknod: /dev/fuse: File exists
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
Starting portmap daemon....
Loading autofs
Starting autofs
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp /var/run /var/lock.
Hostname: HS7810A.
init stmfb
LOADING MODULES
load firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 60980
seeking to 148478
seeking to 1484b0
seeking to 1484e8
seeking to 158858
seeking to 158864
seeking to 158880
seeking to 184d94
seeking to 186e00
init embx
init AVS
skip mpeg2
Model: 'hs7810a'
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis RemoteControl
RemoteControl Map:
                MENU - 04 - 139
                 RED - 4B - 398
               GREEN - 4A - 399
              YELLOW - 49 - 400
                BLUE - 48 - 401
                EXIT - 1C - 174
                TEXT - 0D - 388
                 EPG - 08 - 365
              REWIND - 58 - 168
         FASTFORWARD - 5C - 208
                PLAY - 55 - 207
               PAUSE - 07 - 119
              RECORD - 56 - 167
                STOP - 54 - 128
             STANDBY - 0A - 116
                MUTE - 0C - 113
           CHANNELUP - 5E - 104
         CHANNELDOWN - 5F - 109
            VOLUMEUP - 4E - 115
          VOLUMEDOWN - 4F - 114
                INFO - 06 - 358
                  OK - 1F - 352
                  UP - 00 - 103
               RIGHT - 02 - 106
                DOWN - 01 - 108
                LEFT - 03 - 105
                BACK - 09 - 158
                ZOOM - 0B - 372
               VMODE - 0E -  47
          RESOLUTION - 0F - 393
             TVRADIO - 1A - 378
               SLEEP - 1E - 142
                OPEN - 40 - 361
                 FAV - 41 - 364
               TIMER - 42 - 362
                UPUP - 43 - 414
            DOWNDOWN - 44 - 415
                NEXT - 4C - 407
                LAST - 50 - 412
                 PIP - 51 - 375
               MEDIA - 52 - 226
                LIST - 53 - 395
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
Frontpanel Map:
             STANDBY - 00 - 116
                  OK - 06 - 352
                MENU - 05 - 139
            VOLUMEUP - 03 - 115
          VOLUMEDOWN - 04 - 114
           CHANNELUP - 01 - 104
         CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 10, delay 120
Using period=10 delay=120
[SEM] DOWN