STB Admin Tool 2.x - Diskussion

[morly]

that was most propably the problem, please try it with a movie hdd connected.
if this was the reason I'll create a big warning

[z774c90]

Hi,

Do you mean a HDD like this?
http://www.hardeschijfstore.nl/produ...vx-500-gb.html

If yes, I don't have a one. I have tried only with USB datatraveler 16 GB. Backup crashs by step 2 and restart the box. Some times doesn't response and freezes.

[morly]

you can use any secondary storage...
format it as ext3, use label RECORD and create a folder movie on it.
then reboot box with the device connected

start the AT again, during the connection phase you get a message "toolpath: ..." - which should state: /media/hdd (or something similar - NOT: /tmp)

[z774c90]

Thank you . It's working now fine. I did proceed the following steps.

1- start STB AT
2- click Disk/MB
3- Click on Partition editor
4- change the Number of partitions to 1
5- Filesystem wil change from sda1 to ext3
6- Label will be change to RECORD
7- Create a folder movie on it
8- Reboot the box with the device connected
9- Start the AT again
10-Go to welcome tab
11-Click on Fullbackup Flash Image
12-Choose Backup your Box Image
13- The tool will create now a Full Backup in 5 steps.You will get a pop-up on your computer to save
the zip backup on your computer.This can take several minutes to 10 minutes.

[morly]

perfect - thanks for your response!

[Anskar]

Hallo, bin ja nun stolzer Besitzer der Quad Plus.

Habe heute das erste Mal das MAT bei dieser Box getestet.

Hier mal kurze Infos:

-Backup vom HDMU Image werden erstellt
-Backup vom Orginal-Image wird auch erstellt (war kurzzeitig mal zurück)
-HDMU-Backup zurückspielen auch OK

Super morly !

Weitere Tests werde ich zeitnah machen und hier posten, als erstes der Einbau einer internen HDD und deren Einbindung.

Sorry wenn es zur Box hier doch schon Rückmeldungen gibt, aber habe hier nicht alles gelesen.

MfG

[Anskar]

@ morly, HDD in Quad Plus erfolgreich eingebaut und mit MAT in ext4 formatiert.

sfdisk --change-id /dev/sda 1 83;umount /dev/sda1;echo y | mk fs.ext4 -L 'RECORD' /dev/sda1;
 Done
 

 umount: can't umount /dev/sda1: Invalid argument
 mke2fs 1.42.9 (28-Dec-2013)
 Filesystem label=RECORD
 OS type: Linux
 Block size=4096 (log=2)
 Fragment size=4096 (log=2)
 Stride=0 blocks, Stripe width=0 blocks
 19537920 inodes, 78142160 blocks
 3907108 blocks (5.00%) reserved for the super user
 First data block=0
 Maximum filesystem blocks=0
 2385 block groups
 32768 blocks per group, 32768 fragments per group
 8192 inodes per group
 Superblock backups stored on blocks: 
         32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
         4096000, 7962624, 11239424, 20480000, 23887872, 71663616
 

 Allocating group tables: done                            
 Writing inode tables: done                            
 Creating journal (32768 blocks): done
 Writing superblocks and filesystem accounting information: done
 

  [6n

MfG

Als nächstes noch mit MAT "Erzeuge Movie-Partition"

sfdisk --change-id /dev/sda 1 83;umount /dev/sda1;echo y | mk fs.ext4 -L 'RECORD' /dev/sda1;
 Done
 

 umount: can't umount /dev/sda1: Invalid argument
 mke2fs 1.42.9 (28-Dec-2013)
 Filesystem label=RECORD
 OS type: Linux
 Block size=4096 (log=2)
 Fragment size=4096 (log=2)
 Stride=0 blocks, Stripe width=0 blocks
 19537920 inodes, 78142160 blocks
 3907108 blocks (5.00%) reserved for the super user
 First data block=0
 Maximum filesystem blocks=0
 2385 block groups
 32768 blocks per group, 32768 fragments per group
 8192 inodes per group
 Superblock backups stored on blocks: 
         32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
         4096000, 7962624, 11239424, 20480000, 23887872, 71663616
 

 Allocating group tables: done                            
 Writing inode tables: done                            
 Creating journal (32768 blocks): done
 Writing superblocks and filesystem accounting information: done
 

  [6necho y | mkfs.ext3 -L RECORD /dev/sda1 && mkdir -p /tmp/MORLY
 _MOVIE_TMP && mount /dev/sda1 /tmp/MORLY_MOVIE_TMP && mkdir -p /tmp/MORLY_MOVIE_
 TMP/movie && umount /dev/sda1 && rm -rf /tmp/MORLY_MOVIE_TMP
 mke2fs 1.42.9 (28-Dec-2013)
 Filesystem label=RECORD
 OS type: Linux
 Block size=4096 (log=2)
 Fragment size=4096 (log=2)
 Stride=0 blocks, Stripe width=0 blocks
 19537920 inodes, 78142160 blocks
 3907108 blocks (5.00%) reserved for the super user
 First data block=0
 Maximum filesystem blocks=0
 2385 block groups
 32768 blocks per group, 32768 fragments per group
 8192 inodes per group
 Superblock backups stored on blocks: 
         32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 
         4096000, 7962624, 11239424, 20480000, 23887872, 71663616
 

 Allocating group tables: done                            
 Writing inode tables: done                            
 Creating journal (32768 blocks): done
 Writing superblocks and filesystem accounting information: done
 

  [6n

So alles OK, die HDD nutze ich jetzt für Timeshift und für das "MyTube" Plugin und desen Aufnahmen, da sich da der Aufnahmepfad nicht auf die NAS legen läßt.

MfG

[morly]

Danke fürs Feedback Anskar!!

[FRauANtje]

Moin,

unter debian testing x64 startet das Admintool. Wenn ich aber zur Box connecte, bricht es ab:

Cannot mix incompatible Qt library (version 0x40805) with this library (version 0x40806)
fixme:advapi:UnregisterTraceGuids 0: stub
./startAT.sh: Zeile 2: 17366 Abgebrochen ./Admin_Tool_v2.1_x64

Bei Version 2.2 scheinen bei der Linux-Version die Dateien im Verzeichnis Boxsupporter etwas klein zu sein - diese Version startet bei mir garnicht.

LG FF

[morly]

War ein Fehler im Packet - bitte nochmal die v2.2 laden!