Test der 7700 mit 215 Kernel

**Drielander** · 20.08.2014

... aber dennoch wurde meine Geduld heute Abend auf eine harte Probe gestellt!

Mindestens 3x durfte ich nach einem Einfrieren neu starten - auf dem schwarzem Bildschirm kam dann eine Nachricht, die ich gerne als Bildschirmausdruck präsentiert hätte ... - ja, wenn nicht wieder die Netzwerkverbindung haken würde. Da ich das ahnte, habe ich ein Foto gemacht (s. u.). Was hat es mit dieser Meldung auf sich?

Auch zum Thema Netzwerkverbindung hatte ich schon mehrmals um Unterstützung gebeten (http://www.hdmedia-universe.com/boar...nach-dem-Start), aber bislang hat sich noch Niemand gefunden, der darauf reagiert hat.
Wüsste ich noch, wie man einen Log macht (es wäre hilfreich, wenn das mal irgendwo gepinnt niedergeschrieben würde - nicht Jeder ist in diesen Dingen fit genug, um es allzeit abrufen zu können), könnte ich das auch nicht mal wg. der fehlenden Netzwerk-Verbindung.

- - - Aktualisiert - - -

Noch Eines fällt mir ein: als ich nach einiger Zeit zum TV zurückkam, der auf "Das Erste" angeschaltet geblieben war, sah ich da nur eine hellweiße Fläche. Das hatte ich schon mal und es wechselte sich mit diversen Farbspielen ähnlich Artefakte ab. Seltsamerweise hörte es auf, als ich in meiner Senderliste aus den öffentlich-rechtlichen zu einigen privaten Sendern hin kam. Da war das Bild einwandfrei. Ging ich wieder zurück zu den Ersteren, war das Bild wieder entweder weiß oder eben farbig-diffus wie beschrieben. Sowas hatte ich wohl bei den letzten Images auch schon.

***bonkel*** · 20.08.2014

wie man ein log macht, steht logischerweise in den faqs oben

**Drielander** · 21.08.2014

Moin,

logisch! - jetzt, wo Du es sagst!

Hast Du auch einen Tipp zum Dauer-Thema Netzwerkverbindung, die nach dem Einschalten immer erst beim zweiten Neustart zu Stande kommt (so auch eben - Problem immer gleich - egal, ob feste IP oder DHCP - alle anderen Decices haben keine Probleme)?
Ich kann ja schlecht zum Topf sagen: "warte mal gerade mit dem Bild-Einfrieren oder sonstigen Problemen, bis ich die NW-Verbindung geprüft habe, damit ich im Fall des Falles einen Screenshot machen kann und nicht erst neu starten muss!" (womit sich der Screenshot dann wohl erübrigt

)!

Hier ist die "entblätterte (Log)-Seele des Topfes (via Morleys Tool erstellt), aus der hoffentlich genügend hervorgeht, was gestern und/oder davor so ablief. Wenn ich es richtig interpretiere, sind da auch Aufnahmen und sonstige Aktivitäten wie der Installationsversuch vom CoolTVGuide, die vergeblichen PC-Verbindungsversuche etc. drin.

Code:

PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 STMFB accel interface available
 

 + (9) GFBDC
 15360k total video mem
 7260k usable video mem
 5640kB available for acceleration surfaces.
 resolution: 720 x 576 x 32 (stride: 2880)
 + (9) gLCDDC
 eDBoxLCD::eDBoxLCD >
 Error loading config file!
 

 LCD resolution: -1 x -1 x -1012735160 (stride: 663462807)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event1
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event2
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event3
 Input device "HDMU RC TOPF" is a mouse
 Found 4 input devices.
 + (22) Hdmi CEC driver
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0: reset requested
 CI Slot 1: reset requested
 CI Slot 0 setSource(0)
 CI Slot 1 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 cannot open /proc/stb/tsmux/input2
 cannot open /proc/stb/tsmux/input3
 done, found 2 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryEPlayer3
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 [SERVERSOCKET] ERROR on bind() (Address already in use)
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 main thread is non-idle! display spinner!
 no spinner DC!
 loaded 322 channels/transponders and 7853 services
 scanning for frontends..
 opening frontend 0
 frontend successfully opened
 close frontend 0
 opening frontend 1
 frontend successfully opened
 close frontend 1
 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 12
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 main thread is non-idle! display spinner!
 Failed to open /dev/dbox/fp0
 Scanning hardware info
 Detected: tf7700hdpvr
 [Harddisk] enumerating block devices...
 new Harddisk sda -> /dev/sda -> /dev/sda
 [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
 [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
 Reading satellites.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 slot: 0 configmode: equal
 slot: 1 configmode: advanced
 add 100 to 4
 add 130 to 5
 add 192 to 6
 add 235 to 7
 add 282 to 8
 sec config completed
 Renumbering...
 3660kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
 Selected keymap does not exist!
 Activating language Deutsch
 [ePopen] command: ip -o addr show dev eth0
 eDBoxLCD::getInstance
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 [eSocketMMIHandler] created successfully
 getModeList for port Component
 getModeList for port Scart
 getModeList for port HDMI
 getModeList for port HDMI-PC
 hotplug on dvi
 setMode - port: HDMI mode: 1080i rate: 50Hz
 updateColor:  HDMI
 LINE #  automatically   generated       by      enigma  2
 LINE 
 [AutoMount.py] self.automounts without mounts {}
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 adding Resource DiseqcTester
 resources: {'DiseqcTester': <function DiseqcTesterMain at 0xfcad14>}
 starting hotplug handler
 [TIMER] record time changed, start prepare is now: Tue Aug 19 22:22:40 2014
 [Timer] Record RecordTimerEntry(name=The Devil's Double, begin=Tue Aug 19 22:23:00 2014, serviceref=1:0:1:4461:453:1:C00000:0:0:0:, justplay=0)
 Starting TopfieldVFD
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [ePNG] couldn't open /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png
 [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png not found!. Please contact the skin's author!
 warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
 fp_control: SW Version 1.04
 Model: tf7700hdpvr
 vBoxType: 5
 Model not found
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 setValue 100
 Setvolume: 100 100 (raw)
 Setvolume: 0 0 (-1db)
 playing 1:0:1:6F46:445:1:C00000:0:0:0:
 main thread is non-idle! display spinner!
 [EPGC] 150474 events read from /hdd/epg.dat
 [Timeshift enabled]
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 allocate channel.. 0445:0001
 opening frontend 0
 frontend successfully opened
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12265500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 1665 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:1:6F46:445:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
 192.168
 0.0.0.0
 nameservers: [[192, 168, 178, 1], [217, 237, 150, 188], [193, 193, 158, 10]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 77]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 77], 'up': True, 'mac': '00:3e:9e:9c:c6:e7', 'dhcp': False, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 2
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01039f5(?)
 [SEC] sleep 120ms
 [SEC] sendDiseqc: e11039f5(?)
 [SEC] sleep 50ms
 set sequence pos 3
 [SEC] setTone 1
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x1a13700 running
 [eEPGCache] channel 0x1a13700 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (0515), and 1 audio stream(s) (0516), and the pcr pid is 0515, and the text pid is 0518
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=1301, apid=1302
 DMX_SET_PES_FILTER(0x515) - pcr - ok
 DMX_SET_PES_FILTER(0x516) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0x515) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x518) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 518
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - ok
 TuxTxt running thread...(518)
 disable teletext subtitles page ffffffffffffffff (und)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SR Fernsehen    
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:1:6F46:445:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:1:6F46:445:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 [eDVBLocalTimerHandler] diff is 1
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] update RTC
 [eDVBLocalTimerHandler] time update to 07:19:49
 [eDVBLocalTimerHandler] m_time_difference is 1
 [eDVBLocalTimerHandler] set Linux Time
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 use pmtpid 0514 for service_id 6f46
 [Dish] tuning failed
 [EPGC] start caching events(1408598390)
 eventNewProgramInfo 0 0
 have 1 video stream(s) (0515), and 2 audio stream(s) (0516, 0517), and the pcr pid is 0515, and the text pid is 0518
 decoder state: play, vpid=1301, apid=1302
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SR Fernsehen    
 [showCrypted]
 [showDolby]
 [showMp3]
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 30(8)
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 [__evUpdatedEventInfo]
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 30(8)
 sdt update done!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SR Fernsehen    
 [showCrypted]
 [showDolby]
 [showMp3]
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 30(8)
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 30(8)
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 30(8)
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 30(8)
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [EPGC] nownext finished(1408598399)
 [EPGC] schedule finished(1408598427)
 [EPGC] stop caching events(1408598427)
 [EPGC] next update in 60 min
 warning, skin is missing element key_yellow in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element key_blue in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline2 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline0 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline3 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline1 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline4 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline5 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 ERROR reading PES (fd=52) - Value too large for defined data type
 main thread is non-idle! display spinner!
 playing 1:0:19:2B7A:3F3:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:1:6F46:445:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:1:6F46:445:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 518
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x1a13700
 [eEPGCache] remove channel 0x1a13700
 allocate channel.. 03f3:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1611 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:2B7A:3F3:1:C00000:0:0:0:
 allocate demux
 set sequence pos 3
 [SEC] setTone 0
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x2d3b7778 running
 [eEPGCache] channel 0x2d3b7778 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (18a6), and 1 audio stream(s) (18b0), and the pcr pid is 18a6, and the text pid is 18ba
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=6310, apid=6320
 DMX_SET_PES_FILTER(0x18a6) - pcr - ok
 DMX_SET_PES_FILTER(0x18b0) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x18a6) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x18ba) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 18ba
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(18ba)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: zdf_neo HD      
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:2B7A:3F3:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:2B7A:3F3:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 use pmtpid 189c for service_id 2b7a
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 eventNewProgramInfo 0 0
 have 1 video stream(s) (18a6), and 4 audio stream(s) (18b0, 18b1, 18b2, 18b3), and the pcr pid is 18a6, and the text pid is 18ba
 decoder state: play, vpid=6310, apid=6320
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: zdf_neo HD      
 [showCrypted]
 [showDolby]
 [showMp3]
 sdt update done!
 [Dish] tuning failed
 [eDVBLocalTimerHandler] diff is 1
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] update RTC
 [eDVBLocalTimerHandler] time update to 07:21:52
 [eDVBLocalTimerHandler] m_time_difference is 1
 [eDVBLocalTimerHandler] set Linux Time
 [__evUpdatedEventInfo]
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [EPGC] start caching events(1408598512)
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 crc32 failed! is d9faee4b
 

 [EPGC] schedule finished(1408598521)
 [EPGC] nownext finished(1408598522)

 [EPGC] stop caching events(1408598522)
 [EPGC] next update in 60 min

**Drielander** · 21.08.2014

Einen Crash-Log hätte ich auch noch anzubieten (der ist aber wohl noch von der 704 - k. A., inwieweit informativ):

Code:

<?xml version="1.0" encoding="utf-8"?> <HDMU>
         <enigma2>
                 <crashdate>Thu Aug 14 09:32:56 2014</crashdate>
                 <compiledate>Aug 14 2014</compiledate>
                 <skin>Default Skin</skin>
                 <sourcedate>2014-06-17</sourcedate>
                 <rev>
                         <=!=[=C=D=A=T=A=[
 -----====== HDMU 12704 enigma2 Git 3067 ======-----
 ]=]=>
                 </rev>
                 <freespace>
                         <=!=[=C=D=A=T=A=[
 Filesystem           1K-blocks      Used Available Use% Mounted on
 /dev/root              2071416    155264   1810928   8% /
 tmpfs                    44064         0     44064   0% /ram
 /dev/root              2071416    155264   1810928   8% /dev.static
 tmpfs                    44064         0     44064   0% /dev
 tmpfs                    44064         0     44064   0% /dev/shm
 tmpfs                    44064         0     44064   0% /tmp
 /dev/sda3            485868340  43069800 442798540   9% /media/hdd
 ]=]=>
                 </freespace>
                 <freeram>
                         <=!=[=C=D=A=T=A=[
 MemTotal:          88128 kB
 MemFree:           10828 kB
 Buffers:            4812 kB
 Cached:            34408 kB
 SwapCached:            0 kB
 Active:            43092 kB
 Inactive:          22320 kB
 Active(anon):      26188 kB
 Inactive(anon):        0 kB
 Active(file):      16904 kB
 Inactive(file):    22320 kB
 Unevictable:           0 kB
 Mlocked:               0 kB
 SwapTotal:        265064 kB
 SwapFree:         265064 kB
 Dirty:                32 kB
 Writeback:             0 kB
 AnonPages:         26216 kB
 Mapped:             8112 kB
 Shmem:                 0 kB
 Slab:               6520 kB
 SReclaimable:       1984 kB
 SUnreclaim:         4536 kB
 KernelStack:         432 kB
 PageTables:          184 kB
 Quicklists:          252 kB
 NFS_Unstable:          0 kB
 Bounce:                0 kB
 WritebackTmp:          0 kB
 CommitLimit:      309128 kB
 Committed_AS:      44604 kB
 VmallocTotal:     507824 kB
 VmallocUsed:        4416 kB
 VmallocChunk:     500708 kB
 ]=]=>
                 </freeram>
                 <version>3.0.0</version>
         </enigma2>
         <image>
                 <stbmodel>topf</stbmodel>
                 <kernelversion>
                         <=!=[=C=D=A=T=A=[
 Linux TOPF 2.6.32.61_stm24_0215 #1 PREEMPT Thu Aug 14 02:40:20 CEST 2014 sh4 GNU/Linux
 ]=]=>
                 </kernelversion>
                 <kernelcmdline>console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:9c:c6:e7</kernelcmdline>
                 <nimsockets>NIM Socket 0:</nimsockets>
                 <imageversion>
                         <=!=[=C=D=A=T=A=[
 version=0350200905300000
 ]=]=>
                 </imageversion>
                 <imageissue>
                         <!-- No such file or directory -->
                 </imageissue>
         </image>
         <software>
                 <enigma2software>
                         <=!=[=C=D=A=T=A=[
 enigma2-plugin-system-bmediacenter - 0.0.0.1
 enigma2-plugin-system-hdmucenter - 0.0.0.1
 ]=]=>
                 </enigma2software>
                 <xtrendsoftware>
                         <=!=[=C=D=A=T=A=[
 ]=]=>
                 </xtrendsoftware>
                 <gstreamersoftware>
                         <=!=[=C=D=A=T=A=[
 ]=]=>
                 </gstreamersoftware>
         </software>
         <crashlogs>
                 <enigma2crashlog>
                         <=!=[=C=D=A=T=A=[
 + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 STMFB accel interface available
 

 + (9) GFBDC
 15360k total video mem
 7260k usable video mem
 5640kB available for acceleration surfaces.
 resolution: 720 x 576 x 32 (stride: 2880)
 + (9) gLCDDC
 eDBoxLCD::eDBoxLCD >
 Error loading config file!
 

 LCD resolution: -1 x -1 x -56830744 (stride: 543974755)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event1
 Input device "HDMU RC TOPF" is a mouse
 failed to open /dev/input/event2
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event3
 Input device "HDMU RC TOPF" is a remotecontrol
 Found 4 input devices.
 + (22) Hdmi CEC driver
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0: reset requested
 CI Slot 1: reset requested
 CI Slot 0 setSource(0)
 CI Slot 1 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 cannot open /proc/stb/tsmux/input2
 cannot open /proc/stb/tsmux/input3
 done, found 2 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryEPlayer3
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 [SERVERSOCKET] ERROR on bind() (Address already in use)
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 main thread is non-idle! display spinner!
 no spinner DC!
 loaded 242 channels/transponders and 6848 services
 scanning for frontends..
 opening frontend 0
 frontend successfully opened
 close frontend 0
 opening frontend 1
 frontend successfully opened
 close frontend 1
 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 12
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 setIoPrio best-effort level 3 ok
 Failed to open /dev/dbox/fp0
 Scanning hardware info
 Detected: tf7700hdpvr
 [Harddisk] enumerating block devices...
 main thread is non-idle! display spinner!
 new Harddisk sda -> /dev/sda -> /dev/sda
 [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
 [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
 Reading satellites.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 slot: 0 configmode: simple
 diseqcmode:  single
 slot: 1 configmode: simple
 diseqcmode:  diseqc_a_b
 sec config completed
 [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
 Renumbering...
 3660kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 FATAL:  failed: Operation not permitted
 ]=]=>
                 </enigma2crashlog>
         </crashlogs>
 </HDMU>

**santa** · 21.08.2014

Kann/konnte das netzwerkproblem jemand bestätigen oder bist du allein mit dem Problem?

Das Crashlog ist von den fehlerhaften 704er image

**Amdee.Eleven** · 21.08.2014

Bei mir ist mit meinem Netzwerk immer alles ok.
Zu den schwarzen Bildschirmen vermute ich etwas mit einem Update was den Tuner angeht (lautes Knacken beim Umschalten oder Abstürze bei der Senderwahl).
Hier die Updates im März-April:
12044 07d183f Littlesat, Tue Mar 4 20:46:17 2014 +0100: Move prefered tuner for recordings to custimize setup
12057 c8472e1 Littlesat, Sun Mar 9 12

19 2014 +0100: Optimize some code in ChannelSelection.py as adviced by Adhoik
12064 fedcf79 Littlesat, Mon Mar 10 09

39 2014 +0100: Solve issue with TunerInfo as suggested by Dima73
12142 e4b328b ims, Fri Apr 4 13

57 2014 +0200: fixed crash when is entered wrong frequency and is switched to channel input
12141 98a9022 ims, Fri Apr 4 13

04 2014 +0200: set frequency when are not supported channels for region
Hoffe es hilft.
Gruß

**Drielander** · 21.08.2014

Inzwischen gibt es ja zwei neue Images, von denen ich das 736er via Online-Update flashen wollte. Wurde auch heruntergeladen, aber nach dem Reboot war nichts installiert: immer noch die 719 lt. Info. Ein erneutes Online-Update scheiterte, da sich nach dem Klick auf Online-Update nichts rührte - alle anderen Schaltflächen darüber/darunter reagierten wie gewohnt. Also USB-Stick!

Und um Murmeltier-ähnlich zu ergänzen: auch hier bei der Erstkonfiguration keine Netzwerk-Verbindung, weshalb ich neu startete, was aber auch nichts brachte und einen weiteren Neustart erforderte. Bei früheren Images hatte ich ja ab und an mal Glück und das Netz war direkt da - seit den letzten Images geht da nichts mehr.
So - beim 3. Anlauf ist das Netz jetzt da, so dass ich Plugins, Channel List etc. herrichten kann.

- - - Aktualisiert - - -

... und in Ergänzung der Log nach der Installation/Konfiguration:

Code:

PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 STMFB accel interface available
 

 + (9) GFBDC
 15360k total video mem
 7260k usable video mem
 5640kB available for acceleration surfaces.
 resolution: 720 x 576 x 32 (stride: 2880)
 + (9) gLCDDC
 eDBoxLCD::eDBoxLCD >
 Error loading config file!
 

 LCD resolution: -1 x -1 x -1435623168 (stride: 716323808)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event1
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event2
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event3
 Input device "HDMU RC TOPF" is a mouse
 Found 4 input devices.
 + (22) Hdmi CEC driver
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0: reset requested
 CI Slot 1: reset requested
 CI Slot 0 setSource(0)
 CI Slot 1 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 cannot open /proc/stb/tsmux/input2
 cannot open /proc/stb/tsmux/input3
 done, found 2 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryEPlayer3
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 [SERVERSOCKET] ERROR on bind() (Address already in use)
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 main thread is non-idle! display spinner!
 no spinner DC!
 loaded 245 channels/transponders and 7005 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 boxtype detection via /proc/stb/info not possible... use fallback via demux count!
 

 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 1
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 main thread is non-idle! display spinner!
 Failed to open /dev/dbox/fp0
 Scanning hardware info
 Detected: tf7700hdpvr
 [Harddisk] enumerating block devices...
 new Harddisk sda -> /dev/sda -> /dev/sda
 [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
 [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
 Reading satellites.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 slot: 0 configmode: equal
 slot: 1 configmode: advanced
 add 130 to 5
 add 192 to 6
 add 235 to 7
 add 282 to 8
 sec config completed
 Renumbering...
 3660kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
 Selected keymap does not exist!
 Activating language Deutsch
 [ePopen] command: ip -o addr show dev eth0
 eDBoxLCD::getInstance
 LINE #  automatically   generated       by      enigma  2
 LINE 
 [AutoMount.py] self.automounts without mounts {}
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 getModeList for port Component
 getModeList for port Scart
 getModeList for port HDMI
 getModeList for port HDMI-PC
 hotplug on dvi
 setMode - port: HDMI mode: 1080i rate: 50Hz
 updateColor:  HDMI
 [eSocketMMIHandler] created successfully
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 adding Resource DiseqcTester
 resources: {'DiseqcTester': <function DiseqcTesterMain at 0x1811d84>}
 starting hotplug handler
 Starting TopfieldVFD
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [ePNG] couldn't open /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png
 [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png not found!. Please contact the skin's author!
 warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
 fp_control: SW Version 1.04
 Model: tf7700hdpvr
 vBoxType: 5
 Model not found
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 setValue 50
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:19:283D:3FB:1:C00000:0:0:0:
 main thread is non-idle! display spinner!
 [EPGC] 152100 events read from /hdd/epg.dat
 [Timeshift enabled]
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 allocate channel.. 03fb:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11493000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1743 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
 192.168
 0.0.0.0
 nameservers: [[192, 168, 178, 1], [217, 237, 150, 188], [193, 193, 158, 10]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 77]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 77], 'up': True, 'mac': '00:3e:9e:9c:c6:e7', 'dhcp': False, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 2
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01039f5(?)
 [SEC] sleep 120ms
 [SEC] sendDiseqc: e11039f5(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x2d410e58 running
 [eEPGCache] channel 0x2d410e58 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=5101, apid=5102
 DMX_SET_PES_FILTER(0x13ed) - pcr - ok
 DMX_SET_PES_FILTER(0x13ee) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x13ed) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x13f0) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 13f0
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - TuxTxt running thread...(13f0)
 ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 [eDVBLocalTimerHandler] diff is -1
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] update RTC
 [eDVBLocalTimerHandler] time update to 09:26:27
 [eDVBLocalTimerHandler] m_time_difference is -1
 [eDVBLocalTimerHandler] set Linux Time
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 [EPGC] start caching events(1408605987)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 use pmtpid 13ec for service_id 283d
 [Dish] tuning failed
 eventNewProgramInfo 0 0
 dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
 Rds PID 13f4 detected ? ! ?
 have 1 video stream(s) (13ed), and 3 audio stream(s) (13ee, 13ef, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
 decoder state: play, vpid=5101, apid=5102
 dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
 Rds PID 13f4 detected ? ! ?
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 [__evUpdatedEventInfo]
 sdt update done!
 crc32 failed! is 988f164
 

 crc32 failed! is 1c01e4bb
 

 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [EPGC] nownext finished(1408605996)
 [EPGC] schedule finished(1408606017)
 [EPGC] stop caching events(1408606017)
 [EPGC] next update in 60 min

**Drielander** · 21.08.2014

Zitat von santa

Kann/konnte das netzwerkproblem jemand bestätigen oder bist du allein mit dem Problem? ....

Netzwerkanbindungsprobleme scheint es anderenorts auch zu geben: http://www.hdmedia-universe.com/boar...ll=1#post84590

**TheChip** · 21.08.2014

Das könnte etwas anderes sein, da andere Box.

Ich kann die Netzwerkprobleme beim Topf bisher mit keinem Image nachvollziehen. Für das aktuelle kann ich aber noch nichts sagen, da ich erst seit ner knappen Stunde wieder daheim bin. Ich werd aber eventuell nachher mal installieren und berichten.

**SpaceRat** · 22.08.2014

Ich kann's auch nicht nachvollziehen, das Netzwerk ist mal was, mit dem ich auf dem Topf noch nie Probleme hatte.

Thema: Test der 7700 mit 215 Kernel

Themen-Optionen

Anzeige

The Following User Says Thank You to bonkel For This Useful Post:

Berechtigungen