Test der 7700 mit 215 Kernel

[Drielander]

Nachdem ich gestern wieder zweimal Hänger mit nachfolgendem dunklen Bild hatte, hat sich vorgestern und gestern Abend zusätzlich ein neues Problem eingestellt: der Topf fährt trotz Drücken auf "Abschalten" nicht mehr richtig runter, obwohl die Meldung " Receiver wird ausgeschaltet!" auf dem TV kommt. Am Topf-Display kann man auch "Shutdown .." lesen, aber er bleibt irgendwo stehen/eingeschaltet. Ich habe auch immer noch Verbindung und habe mal einen E2-log gemacht.

PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 STMFB accel interface available
 

 + (9) GFBDC
 15360k total video mem
 7260k usable video mem
 5640kB available for acceleration surfaces.
 resolution: 720 x 576 x 32 (stride: 2880)
 + (9) gLCDDC
 eDBoxLCD::eDBoxLCD >
 Error loading config file!
 

 LCD resolution: -1 x -1 x -1435623168 (stride: 716323808)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event1
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event2
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event3
 Input device "HDMU RC TOPF" is a mouse
 Found 4 input devices.
 + (22) Hdmi CEC driver
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0: reset requested
 CI Slot 1: reset requested
 CI Slot 0 setSource(0)
 CI Slot 1 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 cannot open /proc/stb/tsmux/input2
 cannot open /proc/stb/tsmux/input3
 done, found 2 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryEPlayer3
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 [SERVERSOCKET] ERROR on bind() (Address already in use)
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 main thread is non-idle! display spinner!
 no spinner DC!
 loaded 346 channels/transponders and 8250 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 boxtype detection via /proc/stb/info not possible... use fallback via demux count!
 

 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 1
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 main thread is non-idle! display spinner!
 Failed to open /dev/dbox/fp0
 Scanning hardware info
 Detected: tf7700hdpvr
 [Harddisk] enumerating block devices...
 new Harddisk sda -> /dev/sda -> /dev/sda
 [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
 [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
 Reading satellites.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 slot: 0 configmode: equal
 slot: 1 configmode: advanced
 add 130 to 5
 add 192 to 6
 add 235 to 7
 add 282 to 8
 sec config completed
 Renumbering...
 3660kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
 Selected keymap does not exist!
 Activating language Deutsch
 [ePopen] command: ip -o addr show dev eth0
 eDBoxLCD::getInstance
 LINE #  automatically   generated       by      enigma  2
 LINE 
 [AutoMount.py] self.automounts without mounts {}
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 getModeList for port Component
 getModeList for port Scart
 getModeList for port HDMI
 getModeList for port HDMI-PC
 hotplug on dvi
 setMode - port: HDMI mode: 1080i rate: 50Hz
 updateColor:  HDMI
 [eSocketMMIHandler] created successfully
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 adding Resource DiseqcTester
 resources: {'DiseqcTester': <function DiseqcTesterMain at 0x185ad84>}
 starting hotplug handler
 Starting TopfieldVFD
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [ePNG] couldn't open /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png
 [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png not found!. Please contact the skin's author!
 warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
 fp_control: SW Version 1.04
 Model: tf7700hdpvr
 vBoxType: 5
 Model not found
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 setValue 50
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:19:283D:3FB:1:C00000:0:0:0:
 main thread is non-idle! display spinner!
 [EPGC] 143480 events read from /hdd/epg.dat
 [Timeshift enabled]
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 allocate channel.. 03fb:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11493000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1743 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
 192.168
 0.0.0.0
 nameservers: [[192, 168, 178, 1], [217, 237, 150, 188], [193, 193, 158, 10]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 77]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 77], 'up': True, 'mac': '00:3e:9e:9c:c6:e7', 'dhcp': False, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 2
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01039f5(?)
 [SEC] sleep 120ms
 [SEC] sendDiseqc: e11039f5(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x118f700 running
 [eEPGCache] channel 0x118f700 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=5101, apid=5102
 DMX_SET_PES_FILTER(0x13ed) - pcr - ok
 DMX_SET_PES_FILTER(0x13ee) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x13ed) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x13f0) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 13f0
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(13f0)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [SEC] sleep 500ms
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 [EPGC] start caching events(1408863454)
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 ERROR reading PES (fd=52) - Value too large for defined data type
 use pmtpid 13ec for service_id 283d
 [Dish] tuning failed
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 eventNewProgramInfo 0 0
 dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
 Rds PID 13f4 detected ? ! ?
 have 1 video stream(s) (13ed), and 3 audio stream(s) (13ee, 13ef, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
 decoder state: play, vpid=5101, apid=5102
 dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
 Rds PID 13f4 detected ? ! ?
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 [__evUpdatedEventInfo]
 sdt update done!
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 [EPGC] nownext finished(1408863470)
 [EPGC] schedule finished(1408863490)
 [EPGC] stop caching events(1408863490)
 [EPGC] next update in 60 min
 [__evUpdatedEventInfo]
 [eDVBLocalTimerHandler] diff is 1
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
 [eDVBLocalTimerHandler] time update to 09:27:36
 [eDVBLocalTimerHandler] m_time_difference is 1
 [eDVBLocalTimerHandler] set Linux Time
 [__evUpdatedEventInfo]
 playing 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:19:283D:3FB:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 13f0
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x118f700
 [eEPGCache] remove channel 0x118f700
 allocate channel.. 03f3:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11361000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1611 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:2B66:3F3:1:C00000:0:0:0:
 allocate demux
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x118f6c0 running
 [eEPGCache] channel 0x118f6c0 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (17de), and 1 audio stream(s) (17e8), and the pcr pid is 17de, and the text pid is 17f2
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=6110, apid=6120
 DMX_SET_PES_FILTER(0x17de) - pcr - ok
 DMX_SET_PES_FILTER(0x17e8) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x17de) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x17f2) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 17f2
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(17f2)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: ZDF HD          
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 use pmtpid 17d4 for service_id 2b66
 [__evUpdatedEventInfo]
 [Dish] tuning failed
 playing 1:0:19:6F80:457:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 17f2
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x118f6c0
 [eEPGCache] remove channel 0x118f6c0
 allocate channel.. 0457:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12603000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 2003 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:6F80:457:1:C00000:0:0:0:
 allocate demux
 poll: unhandled POLLERR/HUP/NVAL for fd 54(16)
 set sequence pos 3
 [SEC] setTone 1
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x118f6c0 running
 [eEPGCache] channel 0x118f6c0 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (0d49), and 1 audio stream(s) (0d4a), and the pcr pid is 0d49, and the text pid is 0edc
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=3401, apid=3402
 DMX_SET_PES_FILTER(0xd49) - pcr - ok
 DMX_SET_PES_FILTER(0xd4a) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0xd49) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0xedc) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started edc
 VIDEO_CONTINUE - ok
 TuxTxt running thread...(edc)
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: WDR HD Aachen   
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:6F80:457:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:6F80:457:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 use pmtpid 15e0 for service_id 6f80
 eventNewProgramInfo 0 0
 dvb subtitle  PID 15e5 with wrong subtitling type (24)... force 0x10!!
 have 1 video stream(s) (15e1), and 3 audio stream(s) (15e2, 15e3, 15e6), and the pcr pid is 15e1, and the text pid is 15e4
 decoder state: play, vpid=5601, apid=5602
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service edc
 DMX_SET_PES_FILTER(0x15e1) - pcr - ok
 DMX_SET_PES_FILTER(0x15e2) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x15e1) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x15e4) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 15e4
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - TuxTxt running thread...(15e4)
 ok
 dvb subtitle  PID 15e5 with wrong subtitling type (24)... force 0x10!!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: WDR HD Aachen   
 [showCrypted]
 [showDolby]
 [showMp3]
 [Dish] tuning failed
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: WDR HD Aachen   
 [showCrypted]
 [showDolby]
 [showMp3]
 [EPGC] start caching events(1408866052)
 [__evUpdatedEventInfo]
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 sdt update done!
 playing 1:0:19:2840:3FB:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:6F80:457:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:19:6F80:457:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 15e4
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [EPGC] nownext finished(1408866059)
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x118f6c0
 [eEPGCache] remove channel 0x118f6c0
 [EPGC] abort caching events !!
 allocate channel.. 03fb:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11493000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1743 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:2840:3FB:1:C00000:0:0:0:
 allocate demux
 set sequence pos 3
 [SEC] setTone 0
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x2e40c718 running
 [eEPGCache] channel 0x2e40c718 running
 [EPGC] next update in 17 min
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (1401), and 1 audio stream(s) (140c), and the pcr pid is 1401, and the text pid is 140e
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=5121, apid=5132
 DMX_SET_PES_FILTER(0x1401) - pcr - ok
 DMX_SET_PES_FILTER(0x140c) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x1401) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x140e) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 140e
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(140e)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SWR RP HD       
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:2840:3FB:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:2840:3FB:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 use pmtpid 140a for service_id 2840
 eventNewProgramInfo 0 0
 dvb subtitle  PID 140f with wrong subtitling type (24)... force 0x10!!
 have 1 video stream(s) (1401), and 3 audio stream(s) (1402, 1403, 1406), and the pcr pid is 1401, and the text pid is 140e
 decoder state: play, vpid=5121, apid=5122
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DMX_SET_PES_FILTER(0x1402) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 AUDIO_CONTINUE - ok
 dvb subtitle  PID 140f with wrong subtitling type (24)... force 0x10!!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SWR RP HD       
 [showCrypted]
 [showDolby]
 [showMp3]
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 [Dish] tuning failed
 [__evUpdatedEventInfo]
 sdt update done!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SWR RP HD       
 [showCrypted]
 [showDolby]
 [showMp3]
 warning, skin is missing element FullDescription in <class 'Screens.EventView.EventViewEPGSelect'>
 warning, skin is missing element key_yellow in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element key_blue in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline2 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline0 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline3 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline1 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline4 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline5 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 ERROR reading PES (fd=52) - Value too large for defined data type
 warning, skin is missing element FullDescription in <class 'Screens.EventView.EventViewEPGSelect'>
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]

[TheChip]

Leider sagt das log nicht viel aus, nur das Du zuletzt auf SWR RP HD geschalten hast.

Bei den Problemen die Du hast, würde ich fast auf einen Defekt im Topf schließen. Entweder das Netzteil oder das Board.

[Drielander]

Das Netzteil ist vor gut 2 Jahren vom Topfield-Service auf Kulanz getauscht worden - wäre verwunderlich, wenn es schon wieder defekt wäre. Zudem ist gute Abluft durch einen dezent laufenden 120er Lüfter im Deckel gewährleistet.
Ein Ersatzboard habe ich jetzt nicht.

Ich gehe heute (nach der F1 und BTCC ) auf das zuletzt ohne Mucken laufende Image HDMU_11817_E2_topf_209_git_5570 zurück und beobachte, ob dann die gleichen Problem auftreten. Ich beteilige mich gerne an Aufbauarbeiten, bin aber auch irgendwo Anwender. So bringt das trotz sehr gefälligem aktuellem Image auf die Dauer nur Frust.

[TheChip]

Ich wird heut mal den Topf von meinem Vater noch auf die aktuelle Version bringen. Der nutzt das Teil mehr als ich. Ich hab den nur noch für Tests da. Dann kann ich berichten, wie es bei Ihm läuft. Zumindest mit dem Netzwerk hab ich aber bei meinen letzten Tests diese Woche aber nichts negatives gehabt. Geht bei jedem Neustart.

[Drielander]

Wo werden dann die vergeblichen Shutdown-Versuche protokolliert?

Vergleichstests sind hier beim Topf wie bei den Smartphones: man kann nie sagen, weil es bei einem Gerät funktionoiert, müsste es das bei allen tun. Jedes Trumm ist unterschiedlich, wie wir Alle inzwischen gelernt haben!

[TheChip]

Gar nicht. Das kannst wenn, dann nur im seriellen log sehen, oder im Telnet log. Aber wenn da nix kommt, fängt er gar nicht an mit runterfahren.

[kanral]

Ich habe neu installiert:

- Lautstärkenregelung von allen Quellen funktioniert

neues Problem Mediaportal:
Lässt sich installieren aber nicht mehr deinstallieren.
Die Grauzone taucht nicht auf, auch wenn man diese im Menue anschaltet.

[bonkel]

Logs???

[KleinerSchelm]

Hallo,
sind die probleme auch mit dem 209er kernel vorhanden ?
HDMU_12749_E2_topf_209_git_3123_nodebug_mix
mfg

[boris03]

Hi, wie ich auch schon berichtete, so gut war das >Image noch nie, Design, Startgeschwindigkeit.
So viele Abstürze hatte ich aber vorher auch noch nie, Timer mit Deep standby hat auch nicht funktioniert, heute morgen
lief der Receiver noch. Zudem habe ich seit den letzten Builds (weß nicht mehr genau seit wann) plötzliche
Brumm-Töne, muss den Topf dann restarten. Nutze SPDIF nicht downsamplen.
Ich habe auf einem anderen Topf im Ausland noch eine HDMU Version vom Frühjahr laufen.
Die stürzt nie ab, hat auch noch den Channel Editor im Webinterface, und der Sound macht auch keine Probleme.

Ich glaube ich gehe nochmal darauf zurück, oder wird das nochmal besser?

Thanks