Test der 7700 mit 215 Kernel

[Drielander]

TheChip:

Ich logge mal. Ist der Log in zeitliche Abschnitte oder Zeitangaben aufgeteilt oder soll ich den gesamten Log nehmen?

Gestern Abend hatte ich wieder Probleme mit dem Ausschalten, wenn ich über die PWR-Taste der FB gehe (konfiguriert: kurzes Drücken = sofortiges Runterfahren - langes Drücken = Auswahlmenü). Zwar lese ich am TV, dass der Topf runtergefahren wird, aber es erscheint am Topf-Display ganz kurz "Wait", dann "Shutdown", geht nicht weiter: ergo - Stecker ziehen! Jetzt habe ich es umgekehrt eingestellt - das jetzt konfigurierte lange Drücken auf die PWR-Taste bringt den gewünschten Effekt.

Das Beste am Ganzen ist, dass bisher nach jedem (Neu-)Start die NW-Verbindung da ist! Hoffentlich bleibt das so!

[Drielander]

... und schon wieder ein neues Image - besten Dank an die Devs!

Ich habe eben das 12771 via Online-Update installiert - ging problemlos im ersten Anlauf durch!
Ansonsten die üblichen Einstellungen vorgenommen - inwieweit das Thema Ausschalten sich geändert/gebessert hat, prüfe ich später.

[nebojsa]

on new image kaein info on remont control

[kralle]

New Imagen 12780

[Drielander]

Am Besten bleibe ich gleich mit der FB in der Hand sitzen ...

So - halt das neue 12780 auch wieder via Online-Update installiert - leider wollte diesmal das NW nicht = übersprungen. Sat-Empfang war da, aber beim Einstellen der FB-Parameter gab's einen WS. Der nachfolgende Neustart brachte wieder kein NW (weder Fest-IP noch DHCP) und nochmaliges Einstellen in der FB-Konf einen erneuten WS. ... und noch ein drittes Mal bereits dann, wenn ich die FB-Einstellungen nur anwähle.

Das bringt nichts - ich gehe auf die 12771 zurück (USB-Stick). Wenn die Crash-Logs noch vorhanden sind und ich endlich wieder ein Netzwerk finde, stelle ich sie ein.

[Drielander]

Soderle - die USB-Installation auf die 12771 ging ebenso flott durch - diesmal direkt mit NW.

Deshalb anbei die crash-logs.

enigma2_crash_1409491507.log
enigma2_crash_1409491843.log
enigma2_crash_1409492200.log
enigma2_crash_1409492925.log

... und hier noch der E2-log (falls sinnvoll/hilfreich):

PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 STMFB accel interface available
 

 + (9) GFBDC
 15360k total video mem
 7260k usable video mem
 5640kB available for acceleration surfaces.
 resolution: 720 x 576 x 32 (stride: 2880)
 + (9) gLCDDC
 eDBoxLCD::eDBoxLCD >
 Error loading config file!
 

 LCD resolution: -1 x -1 x -731077384 (stride: 1701997409)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event1
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event2
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event3
 Input device "HDMU RC TOPF" is a remotecontrol
 Found 4 input devices.
 + (22) Hdmi CEC driver
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0: reset requested
 CI Slot 1: reset requested
 CI Slot 0 setSource(0)
 CI Slot 1 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 cannot open /proc/stb/tsmux/input2
 cannot open /proc/stb/tsmux/input3
 done, found 2 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryEPlayer3
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 [SERVERSOCKET] ERROR on bind() (Address already in use)
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 main thread is non-idle! display spinner!
 no spinner DC!
 loaded 325 channels/transponders and 7709 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 boxtype detection via /proc/stb/info not possible... use fallback via demux count!
 

 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 1
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 main thread is non-idle! display spinner!
 Failed to open /dev/dbox/fp0
 Scanning hardware info
 Detected: tf7700hdpvr
 [Harddisk] enumerating block devices...
 new Harddisk sda -> /dev/sda -> /dev/sda
 [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
 [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
 new Harddisk sdb -> /dev/sdb -> /dev/sdb
 Reading satellites.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 slot: 0 configmode: advanced
 add 192 to 6
 slot: 1 configmode: equal
 sec config completed
 [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
 Renumbering...
 3660kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
 Selected keymap does not exist!
 Activating language Deutsch
 [ePopen] command: ip -o addr show dev eth0
 eDBoxLCD::getInstance
 [eSocketMMIHandler] created successfully
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 LINE #  automatically   generated       by      enigma  2
 LINE 
 [AutoMount.py] self.automounts without mounts {}
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 getModeList for port Component
 getModeList for port Scart
 getModeList for port HDMI
 getModeList for port HDMI-PC
 hotplug on dvi
 setMode - port: HDMI mode: 1080i rate: 50Hz
 updateColor:  HDMI
 starting hotplug handler
 adding Resource DiseqcTester
 resources: {'DiseqcTester': <function DiseqcTesterMain at 0x10711ec>}
 Starting TopfieldVFD
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [ePNG] couldn't open /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png
 [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png not found!. Please contact the skin's author!
 warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
 fp_control: SW Version 1.04
 Model: tf7700hdpvr
 vBoxType: 5
 Model not found
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 setValue 50
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:1:384:21:85:C00000:0:0:0:
 main thread is non-idle! display spinner!
 [EPGC] 153604 events read from /hdd/epg.dat
 [Timeshift enabled]
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 allocate channel.. 0021:0085
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12480000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 1880 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:1:384:21:85:C00000:0:0:0:
 allocate demux
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
 192.168
 0.0.0.0
 nameservers: [[192, 168, 178, 1]]
 read configured interface: {'lo': {'dhcp': False}, 'wlan0': {'dhcp': True}, 'eth0': {'dhcp': True}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 20], 'up': True, 'mac': '00:3e:9e:9c:c6:e7', 'dhcp': True, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 1
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01039f5(?)
 [SEC] sleep 120ms
 [SEC] sendDiseqc: e11039f5(?)
 [SEC] sleep 50ms
 set sequence pos 3
 [SEC] setTone 1
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x2ed5ac8 running
 [eEPGCache] channel 0x2ed5ac8 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (03ff), and 1 audio stream(s) (0400), and the pcr pid is 03ff, and the text pid is 0027
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=1023, apid=1024
 DMX_SET_PES_FILTER(0x3ff) - pcr - ok
 DMX_SET_PES_FILTER(0x400) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0x3ff) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x27) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 27
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - TuxTxt running thread...(027)
 ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SPORT1          
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:1:384:21:85:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:1:384:21:85:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 use pmtpid 0067 for service_id 0384
 [Dish] tuning failed
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 eventNewProgramInfo 0 0
 have 1 video stream(s) (03ff), and 1 audio stream(s) (0400), and the pcr pid is 03ff, and the text pid is 0027
 decoder state: play, vpid=1023, apid=1024
 [EPGC] start caching events(1409494759)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SPORT1          
 [showCrypted]
 [showDolby]
 [showMp3]
 sdt update done!
 [eDVBLocalTimerHandler] diff is -1
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] update RTC
 [eDVBLocalTimerHandler] time update to 16:19:19
 [eDVBLocalTimerHandler] m_time_difference is -1
 [eDVBLocalTimerHandler] set Linux Time
 [__evUpdatedEventInfo]
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 ERROR reading section - Value too large for defined data type
 

 poll: unhandled POLLERR/HUP/NVAL for fd 29(8)
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [EPGC] nownext finished(1409494766)
 [EPGC] schedule other finished(1409494769)
 [EPGC] schedule finished(1409494776)
 [EPGC] stop caching events(1409494776)
 [EPGC] next update in 60 min

[Drielander]

Es wurde ja von Dev-Seite immer gebeten, dass Fixes nur gemacht werden können, wenn bei auftauchenden Problemen Logs zur Verfügung gestellt werden.

Jetzt möchte ich mal eine Bitte äußern:

Ich fände es gut und auch hilfreich, wenn Denjenigen, die Logs zur Verfügung stellen, auch gesagt wird, ob da die richtigen/wichtigen Informationen drin stecken, ob noch mehr benötigt wird und was der Verursacher des Problems war. Daraus kann man als Laie nur lernen!

Bislang habe ich bis auf 1x keine Reaktionen auf meine Logs erhalten.

[TheChip]

@all, hab nal die Beiträge zur Fernbedienung in ein neues Thema verschoben, passt ja nicht so ganz zum Test mit Kernel 215

[Drielander]

....Ich fände es gut und auch hilfreich, wenn Denjenigen, die Logs zur Verfügung stellen, auch gesagt wird, ob da die richtigen/wichtigen Informationen drin stecken, ob noch mehr benötigt wird und was der Verursacher des Problems war. .....

Keine Antwort auf diese Bitte um kurze Rückmeldungen auf die eingestellten Logs?

[Drielander]

Gestern hatte ich beim 12791 einen schwarzen Bildschirm - derzeit beschäftigt sich das vorhin via Online-Update installierte 12810 mit dem Sendersuchlauf auf 23,5 & 28,2.