Hi Leute,
wer hat ne AT7500 mit aktuellem HDMU Image?
Bitte postet mir folgende Telnet-Ausgabe:
ThxCode:cat /proc/mtd
Hi Leute,
wer hat ne AT7500 mit aktuellem HDMU Image?
Bitte postet mir folgende Telnet-Ausgabe:
ThxCode:cat /proc/mtd
"Every Setback is a Set Up for a Comeback"
Code:-----====== HDMU 12949 enigma2 Git 3258 ======----- BusyBox v1.22.1 (2014-10-09 01:54:49 CEST) built-in shell (ash) Enter 'help' for a list of built-in commands. AT7500:~# cat /proc/mtd dev: size erasesize name mtd0: 00060000 00020000 "Boot_firmware" mtd1: 00320000 00020000 "Kernel" mtd2: 0001fffe 00020000 "Fake_ROOT" mtd3: 0001fffe 00020000 "Fake_DEV" mtd4: 0001fffe 00020000 "Fake_APP" mtd5: 03c00000 00020000 "Real_ROOT"
genau das brauchte ich - thx!!
gibt bei der AT7500 Unterschiede - die muss ich abfragen...
"Every Setback is a Set Up for a Comeback"
wenn das relevant is hab eine at 7600 mit titan und da sieht die ausgabe so aus
TitanNit-atemio7600:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00060000 00020000 "Boot firmware"
mtd1: 002a0000 00020000 "Kernel"
mtd2: 00e20000 00020000 "Root"
mtd3: 00600000 00020000 "Var"
mtd4: 028e0000 00020000 "Swap"
mtd5: 03fa0000 00020000 "Full"
TitanNit-atemio7600:~#
das MAT unterstützt (noch) keine AT7600
"Every Setback is a Set Up for a Comeback"
at7600 is genau das selbe wie at7500
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
glaub aber nicht, dass das AT die Box erkennt - aber kannste ja mal testen
"Every Setback is a Set Up for a Comeback"
wenn ich mich mit mat verbinde kommt diese meldulng
Box Supporter loaded with version: 0.1.6
Profile changed to: default
### START PHASE: STARTING STB ADMIN TOOL Windows 2.2.2 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.2.2 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.2.116 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: TitanNit-atemio7600:~#
Query CPU type...
Received CPU type: SH4
Query box type...
Change USB/MB tab to default
Boxtype received: atevio7500
No Mounted Movie HDD found
Flash image bootet from: /dev/mtdblock2
Start tool at location: /tmp
FW tools transfered...OK
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/10: Welcome successfully initialized
Disk Manager changed to: sfdisk
Loading plugin information...
Loading rules from file...
Loaded backup rule: Channel_List
Rule changed to: Channel_List
Loaded edit rule: CustomEpg
Loaded backup rule: Network_Interfaces
Loaded edit rule: Skin_NextEvents_Drei
Loaded backup rule: SoftCam
Flash tool received new rules list
Part tool received new rules list
5 backup rule(s) loaded successfully
Destination changed to: Archive...
Tab 2/10: Cont-Man successfully initialized
Tab 3/10: Logging successfully initialized
Tab 4/10: Settings successfully initialized
Tab 5/10: Telnet successfully initialized
Disk Manager: Disk information loaded successfully
Tab 6/10: Disks/MB successfully initialized
Tab 7/10: Plugins successfully initialized
Flash tool received new plugin list
Part tool received new plugin list
Tab 8/10: Box Status successfully initialized
Tab 9/10: Flash successfully initialized
Flashing not supported for your box - Flashtool deactivated
Requesting bootargs via LAN...
Tab 10/10: Bootargs successfully initialized
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###
oh - geht doch thx
werden bootargs ausgelesen?
"Every Setback is a Set Up for a Comeback"
ja
Code:#Bootargs Morly's SH4 STB Admin Tool from: So Okt 12 2014 bootdelay=0 baudrate=115200 menutimeout=1500 hwnfconf=setenv nwhwnet device:eth0,hwaddr:$ethaddr ipconf=setenv ipaddrcfg ip=$ipaddr:$serverip:$gateway:$netmask:sdk:eth0:off cramfsbootargs=run hwnfconf;run ipconf;setenv bootargs console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs $ipaddrcfg nwhwconf=$nwhwnet bigphysarea=5000 stb7105:eth0:off stmmaceth=msglvl:0,watchdog:4000,rxsize:16 $MTD loglevel=0 bootdesc_0=---FLASH--- bootcmd=bootmenu $menutimeout $default stdin=serial stdout=serial stderr=serial ethaddr=00:11:22:33:00:26 MTD=mtdparts=physmap-flash:384K(Boot_firmware),2688k@0x60000(kernel),0K@0x1120000(App),14464k@0x300000(ROOT_FS),0K@0x1120000(Device),1M@0x2100000(CONFIG),30M@0x02200000(User),64M@0(All),0K@0x1120000(APP_ORG),0K@0x1120000(APP_BAK) bootcmd_0=run bootargs_0; bootm a0060000 bootargs_0=run hwnfconf;run ipconf;setenv bootargs console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs $ipaddrcfg nwhwconf=$nwhwnet bigphysarea=5000 stb7105:eth0:off stmmaceth=msglvl:0,watchdog:4000,rxsize:16 $MTD loglevel=8