[done] MAT stoppt biem Anlegen der back up rules

[axleu]

Hallo Morly,

versuche verzweifelt mit dem MAT-Tool 2.2 bei meiner Box GM Triplex die Firmware upzudaten.

Verbinde die Box mit connect, klappt prima, Verbindung steht!
Aktiviere dann unter Menü Flash, mit rechter Maustaste "reinstall plugins", dann mit rechter Maustaste" backup/restore tools", hier mit linker Maustaste alle Rule-Kästchen markiert, dann linke Maustaste "Flashing your Box", der Prozess starte und bleibt bei "Create backup for rule 1/6: Channel_List" stehen.

Was mach ich falsch?

Danke!

Axleu


Ausgabe: Debug Browser:

Box Supporter loaded with version: 0.1.7
Profile changed to: default
### START PHASE: STARTING STB ADMIN TOOL Windows 2.2 ###
Morly's STB Admin Tool successfully started
### COMPLETED PHASE: STARTING STB ADMIN TOOL Windows 2.2 ###
Box Supporter: no new version on server - continue...
Connecting to IP: 192.168.100.33 with username: root and password: HDMU
Connecting to box via telnet...OK
Telnet prompt received: SPARK7162:~#
Query CPU type...
Received CPU type: SH4
Query box type...
Change USB/MB tab to SPARK-mod
Boxtype received: spark7162
Mounted Movie HDD found at: /media/hdd
Flash image bootet from: /dev/mtdblock6
Start tool at location: /media/hdd
BOOTET HDMU IMAGE FOUND
FW tools transfered...OK
All needed commands found on box
### COMPLETED PHASE: CONNECTING AND INITIALIZING STB ###
### START PHASE: INITIALIZING AND STARTING TABS ###
Box successfully initialized, now initializing and starting tools in tabs
Tab 1/10: Welcome successfully initialized
Disk Manager changed to: sfdisk
Loading plugin information...
Loading rules from file...
Loaded backup rule: Channel_List
Rule changed to: Channel_List
Loaded edit rule: CustomEpg
Loaded backup rule: Network_Interfaces
Loaded backup rule: samba
Loaded edit rule: Skin_NextEvents_Drei
Loaded backup rule: SoftCam
Flash tool received new rules list
Part tool received new rules list
6 backup rule(s) loaded successfully
Backup/Restore: source changed
Source changed to: Archive...
Tab 2/10: Cont-Man successfully initialized
Tab 3/10: Logging successfully initialized
Tab 4/10: Settings successfully initialized
Tab 5/10: Flash successfully initialized
Tab 6/10: Telnet successfully initialized
Tab 7/10: Disks/MB successfully initialized
Requesting bootargs via LAN...
Module i2s.ko was loaded for accessing the bootargs It is recommended to reboot the box after using the tool
Tab 8/10: Bootargs successfully initialized
Disk Manager: Disk information loaded successfully
Tab 9/10: Plugins successfully initialized
Flash tool received new plugin list
Part tool received new plugin list
Tab 10/10: Box Status successfully initialized
### COMPLETED PHASE: INITIALIZING AND STARTING TABS - THE TOOL IS NOW READY TO BE USED!! ###
Flash Plugin Tab: activated
Flash Backup Tab: activated
Flash Backup Tab: deactivated
Flash Backup Tab: activated
Flashing box image...
Create backup for rule 1/6: Channel_List