+ Antworten
Seite 1 von 53 1231151 ... LetzteLetzte
Ergebnis 1 bis 10 von 523
  1. #1
    VIP
    Registriert seit
    12.05.2012
    Beiträge
    127
    Thanks
    122
    Thanked 63 Times in 30 Posts

    fehler beim bauen mit Audioniek git

    nach ein neues auschkecke des gits und das erneute versuch neutrino -mp-next zu bauen bekomm den fehler

    Code:
    ==> Applying Patch: /home/ciccio/opti/StartHere-master/cdk/Patches/neutrino-mp-next.patch
    patching file acinclude.m4
    patching file src/gui/vfd_setup.cpp
    patching file src/driver/vfd.cpp
    Hunk #1 FAILED at 53.
    Hunk #11 FAILED at 726.
    Hunk #15 FAILED at 1142.
    3 out of 16 hunks FAILED -- saving rejects to file src/driver/vfd.cpp.rej
    make: *** [.deps/neutrino-mp-next.do_prepare] Fehler 1
    ciccio@ciccio-VirtualBox:~/opti/StartHere-master/cdk$

    und da is die ausgabe vom vfd.cpp.rej

    Code:
    --- src/driver/vfd.cpp
    +++ src/driver/vfd.cpp
    @@ -53,12 +53,15 @@
     
     #if defined (BOXMODEL_OCTAGON1008) || defined (BOXMODEL_TF7700)
         #define VFDLENGTH 8
    -#elif defined (BOXMODEL_FORTIS_HDBOX)
    +#elif defined (BOXMODEL_FORTIS_HDBOX) || defined (BOXMODEL_ATEVIO7500)
         #define VFDLENGTH 12
    -#elif defined (BOXMODEL_ATEVIO7500)
    -    #define VFDLENGTH 12
    -#elif defined (BOXMODEL_SPARK)
    +#elif defined (BOXMODEL_SPARK) \
    +   || defined (BOXMODEL_HS7810A) \
    +   || defined (BOXMODEL_HS7119) \
    +   || defined (BOXMODEL_HS7819)
         #define VFDLENGTH 4
    +#elif defined (BOXMODEL_HS7110)
    +    #define VFDLENGTH 0
     #else
         #define VFDLENGTH 16
     #endif
    @@ -726,19 +800,32 @@
                         strncat(VolumeBar, c0, 1);
                 }
                 ShowText(VolumeBar);
    -#elif defined (BOXMODEL_OCTAGON1008) || defined (BOXMODEL_TF7700)
    +  #elif defined (BOXMODEL_TF7700)
                 char vol_chr[64] = "";
                 snprintf(vol_chr, sizeof(vol_chr)-1, "VOL: %d%%", (int)vol);
                 ShowText(vol_chr);
    -#elif defined (BOXMODEL_SPARK)
    +  #elif defined (BOXMODEL_OCTAGON1008)
                 char vol_chr[64] = "";
    -            snprintf(vol_chr, sizeof(vol_chr)-1, "%d", (int)vol);
    +            snprintf(vol_chr, sizeof(vol_chr)-1, "VOL=%3d", (int)vol);
                 ShowText(vol_chr);
    -#elif defined (BOXMODEL_FORTIS_HDBOX) || defined (BOXMODEL_ATEVIO7500) || defined (BOXMODEL_UFS912) || defined (BOXMODEL_UFS913) || defined (BOXMODEL_CUBEREVO) || defined (BOXMODEL_CUBEREVO_MINI2) || defined (BOXMODEL_CUBEREVO_2000HD)
    +  #elif defined (BOXMODEL_SPARK) \
    +     || defined (BOXMODEL_HS7119) \
    +     || defined (BOXMODEL_HS7810A) \
    +     || defined (BOXMODEL_HS7819)
    +            char vol_chr[64] = "";
    +            snprintf(vol_chr, sizeof(vol_chr)-1, "v%3d", (int)vol);
    +            ShowText(vol_chr);
    +  #elif defined (BOXMODEL_FORTIS_HDBOX) \
    +     || defined (BOXMODEL_ATEVIO7500) \
    +     || defined (BOXMODEL_UFS912) \
    +     || defined (BOXMODEL_UFS913) \
    +     || defined (BOXMODEL_CUBEREVO) \
    +     || defined (BOXMODEL_CUBEREVO_MINI2) \
    +     || defined (BOXMODEL_CUBEREVO_2000HD)
                 char vol_chr[64] = "";
                 snprintf(vol_chr, sizeof(vol_chr)-1, "Volume: %d%%", (int)vol);
                 ShowText(vol_chr);
    -#endif
    +  #endif
                 oldpp = pp;
             }
     #else
    @@ -1142,15 +1241,22 @@
     #ifdef HAVE_DUCKBOX_HARDWARE
     void CVFD::ClearIcons()
     {
    -#if defined (BOXMODEL_ATEVIO7500) || defined (BOXMODEL_SPARK)
    +  #if defined (BOXMODEL_ATEVIO7500) \
    +   || defined (BOXMODEL_HS7110) \
    +   || defined (BOXMODEL_HS7810A) \
    +   || defined (BOXMODEL_HS7119) \
    +   || defined (BOXMODEL_HS7819) \
    +   || defined (BOXMODEL_SPARK)
         return;
    -#endif
    +  #endif
         for (int id = 0x10; id < FP_ICON_MAX; id++) {
    -#if defined (BOXMODEL_OCTAGON1008) || defined(BOXMODEL_FORTIS_HDBOX) || defined (BOXMODEL_TF7700)
    -        if (id != 0x16)
    -#else
    +  #if defined (BOXMODEL_OCTAGON1008)
    +        if (id != FP_ICON_USB && id != FP_ICON_HDD)
    +  #elif defined(BOXMODEL_FORTIS_HDBOX) || defined (BOXMODEL_TF7700)
    +        if (id != FP_ICON_USB)
    +  #else
             if (id != 0x10 && id != 0x12)
    -#endif
    +  #endif
                 ShowIcon((fp_icon)id, false);
         }
         return;


  2. #2
    VIP
    Registriert seit
    12.05.2012
    Beiträge
    127
    Thanks
    122
    Thanked 63 Times in 30 Posts
    nach langem versuchen und probirern hab ich es ihn bekommen das es wider duchbaut


  3. #3
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    I will look into this and fix it. Apparently, the neutrino code was changed, so the patch fails. Thank you for reporting it.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers


  4. #4
    VIP
    Registriert seit
    12.05.2012
    Beiträge
    127
    Thanks
    122
    Thanked 63 Times in 30 Posts
    habe versucht auch die anderen neutrinos zu bauen und kommt auch eine fehler meldung

    das neutrino nmp-next habe ich nach langem versuche ihn bekommen das es wieder durch baut

    gibt es eine moglichkeit anzuzeigen was ich bei mir local geändert habe

    - - - Aktualisiert - - -

    dank freund google habe ich das gefunden


    Code:
    ciccio@ciccio-VirtualBox:~/opti/StartHere-master/cdk$ git diff
    diff --git a/Patches/neutrino-mp-next.patch b/Patches/neutrino-mp-next.patch
    index a55dfae..6a0ada0 100644
    --- a/Patches/neutrino-mp-next.patch
    +++ b/Patches/neutrino-mp-next.patch
    @@ -104,26 +104,6 @@
      
     --- neutrino-mp-next.org/src/driver/vfd.cpp
     +++ neutrino-mp-next/src/driver/vfd.cpp
    -@@ -53,12 +53,15 @@
    - 
    - #if defined (BOXMODEL_OCTAGON1008) || defined (BOXMODEL_TF7700)
    -       #define VFDLENGTH 8
    --#elif defined (BOXMODEL_FORTIS_HDBOX)
    -+#elif defined (BOXMODEL_FORTIS_HDBOX) || defined (BOXMODEL_ATEVIO7500)
    -       #define VFDLENGTH 12
    --#elif defined (BOXMODEL_ATEVIO7500)
    --      #define VFDLENGTH 12
    --#elif defined (BOXMODEL_SPARK)
    -+#elif defined (BOXMODEL_SPARK) \
    -+   || defined (BOXMODEL_HS7810A) \
    -+   || defined (BOXMODEL_HS7119) \
    -+   || defined (BOXMODEL_HS7819)
    -       #define VFDLENGTH 4
    :
    diff --git a/Patches/neutrino-mp-next.patch b/Patches/neutrino-mp-next.patch
    index a55dfae..6a0ada0 100644
    --- a/Patches/neutrino-mp-next.patch
    +++ b/Patches/neutrino-mp-next.patch
    @@ -104,26 +104,6 @@
      
     --- neutrino-mp-next.org/src/driver/vfd.cpp
     +++ neutrino-mp-next/src/driver/vfd.cpp
    -@@ -53,12 +53,15 @@
    - 
    - #if defined (BOXMODEL_OCTAGON1008) || defined (BOXMODEL_TF7700)
    -       #define VFDLENGTH 8
    --#elif defined (BOXMODEL_FORTIS_HDBOX)
    -+#elif defined (BOXMODEL_FORTIS_HDBOX) || defined (BOXMODEL_ATEVIO7500)
    -       #define VFDLENGTH 12
    --#elif defined (BOXMODEL_ATEVIO7500)
    --      #define VFDLENGTH 12
    --#elif defined (BOXMODEL_SPARK)
    -+#elif defined (BOXMODEL_SPARK) \
    -+   || defined (BOXMODEL_HS7810A) \
    -+   || defined (BOXMODEL_HS7119) \
    -+   || defined (BOXMODEL_HS7819)
    -       #define VFDLENGTH 4
    -+#elif defined (BOXMODEL_HS7110)
    -+      #define VFDLENGTH 0
    - #else
    -       #define VFDLENGTH 16
    - #endif
     @@ -116,6 +119,7 @@
            }
      }
    @@ -140,6 +120,16 @@
      
      static void ShowNormalText(char * str, bool fromScrollThread = false)
      {
    +
    ++@@ -185,7 +190,7 @@
    ++                              pthread_join(vfd_scrollText, NULL);
    ++
    ++                              vfd_scrollText = 0;
    +++                             scrollstr="";
    ++                              scrollstr = (char *)"";
    ++              }
    ++
    ++              //scroll text thread
     @@ -199,36 +204,40 @@
      
            int i;
    diff --git a/make.sh b/make.sh
    index 3056695..527153a 100755
    --- a/make.sh
    +++ b/make.sh
    @@ -8,7 +8,7 @@ if [ "$1" == -h ] || [ "$1" == --help ]; then
      echo "Parameter 5: Media Framework (1-4)"
      echo "Parameter 6: External LCD support (1-2)"
      echo "Parameter 7: Image (Enigma=1/Neutrino=2) (1-2)"
    - echo "Parameter 8: Neutrino variant (1-6)"
    + echo "Parameter 8: Neutrino variant (1-7)"
      echo "Parameter 9: Bootloader version (1-2) (target system 19 only)"
      exit
     fi
    @@ -333,18 +333,20 @@ case "$REPLY" in
                            *)      echo -e "\nWhich neutrino variant do you want to build?"
                                    echo "   1) neutrino-mp"
                                    echo "   2) neutrino-mp-next"
    -                               echo "   3) neutrino-hd2-exp"
    -                               echo "   4) neutrino-mp-github"
    -                               echo "   5) neutrino-mp-martii-github"
    -                               echo "   6) neutrino-mp-tangos"
    -                               read -p " Select Neutrino variant (1-6)? ";;
    +                               echo "   3) neutrino-mp-next-all"
    +                               echo "   4) neutrino-hd2-exp"
    +                               echo "   5) neutrino-mp-github"
    +                               echo "   6) neutrino-mp-martii-github"
    +                               echo "   7) neutrino-mp-tangos"
    +                               read -p " Select Neutrino variant (1-7)? ";;
                    esac
                    case "$REPLY" in
                            2)      IMAGEN="neutrino-mp-next";;
    :

  5. The Following User Says Thank You to ciccio81 For This Useful Post:



  6. #5
    Neuer Benutzer
    Registriert seit
    31.08.2012
    Beiträge
    19
    Thanks
    4
    Thanked 3 Times in 2 Posts
    Hi to all and sorry if i post here but speak about neutrino on audionek git.
    Well with some little workaround i have build neutrino-mp from audionek-git for octagon1028 with loader 6.00
    Now i see that there is no support for dvb-t tuner (cxd2820.ko) and dvb-c (tda10024.ko) and ask to audionek when and if he can add support to them.
    This drivers i think could be open because bpanther firmware have support to them.
    Other problems for build the final ird firmware are that i need a valid audio and video.elf so a pti.ko closed source for kernel version 215.
    I think no possible take audio, video and pti from other neutrino firmware built with kernel 215 because there are different gcc commpilers 483 against 463 but i hope this is not right.
    Many thanks to all and best regards.


  7. #6
    VIP
    Registriert seit
    12.05.2012
    Beiträge
    127
    Thanks
    122
    Thanked 63 Times in 30 Posts
    Il pti e audio, Video elf lo puoi prendere dall immaggine hdmu


    Die pti ,audio Video elf .
    Kannst aus ein hdmu image nehmen

    Werden die Treiber für DVB c und dvbt mit gebaut? Sind sie in der RCS eingetragen?

    I driver per cavo e terrestre vengono compilati
    Sono anche scritti nel file RCS cioe che all avvio del box vengono partiti


  8. #7
    Neuer Benutzer
    Registriert seit
    31.08.2012
    Beiträge
    19
    Thanks
    4
    Thanked 3 Times in 2 Posts
    Zitat Zitat von ciccio81 Beitrag anzeigen
    Il pti e audio, Video elf lo puoi prendere dall immaggine hdmu


    Die pti ,audio Video elf .
    Kannst aus ein hdmu image nehmen

    Werden die Treiber für DVB c und dvbt mit gebaut? Sind sie in der RCS eingetragen?

    I driver per cavo e terrestre vengono compilati
    Sono anche scritti nel file RCS cioe che all avvio del box vengono partiti
    Thanks for answer
    with default build the dvb-t and c driver are not compiled i see so into the kernel config file for activate them but there aren't .
    Have you build so neutrino for octagon and you find modules compiled ??
    I see the rcs but the modules are not present and so the source.
    HDMU is based on enigma2 and i think better video, audio and pti-np from another neutrino image but i investigate on it if possible with HDMU or other.
    Geändert von linch (08.12.2014 um 11:51 Uhr)


  9. #8
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    Zitat Zitat von Audioniek Beitrag anzeigen
    I will look into this and fix it. Apparently, the neutrino code was changed, so the patch fails.
    I have pushed new neutrino patches and all 6 variants now patch OK. Variants 4 and 5 do not build through: their gits have remnants of a failed automatic merge. The git managers have to fix that.

    Regards,

    Audioniek.

    - - - Aktualisiert - - -

    Zitat Zitat von linch Beitrag anzeigen
    with default build the dvb-t and c driver are not compiled
    It is quite possible that neutrino itself lacks support for dvb-t and dvb-c, so adding the drivers would not bring much.

    Regards,

    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  10. The Following 2 Users Say Thank You to Audioniek For This Useful Post:



  11. #9
    VIP
    Registriert seit
    12.05.2012
    Beiträge
    127
    Thanks
    122
    Thanked 63 Times in 30 Posts
    beim neu aus checken von e2 und auswahl von diff 0 bleibt der bau ihr stehn

    Code:
    Choose between the following revisions:
    ========================================================================================================
     0) Newest                 - E2 OpenPli gstreamer / libplayer3    (Can fail due to outdated patch)     
    ========================================================================================================
     1) Use your own e2 git dir without patchfile
    ========================================================================================================
     2) Tue, 17 Jun 2014 07:44 - E2 OpenPli gstreamer / libplayer3 b670ebecf90dc4651b2862ebf448bca370d69fef
     3) Mon, 30 Dec 2013 18:33 - E2 OpenPli gstreamer / libplayer3 715a3024ad7ae3e89dad039bfb8ae49350552c39
     4) Sun, 23 Feb 2014 10:05 - E2 OpenPli gstreamer / libplayer3 e858a47a49c4fd8cdf22b29ea7278e6b4a2bddae
     5) Tue, 25 Mar 2014 18:17 - E2 OpenPli gstreamer / libplayer3 7272840d7db98a88f5c8b2882cc78d7ddc04e5e6
    ========================================================================================================
    Media Framework : gstreamer
    External LCD    : no
    Select          : 0
    Revision        : 
    
    Cloning into '/home/ciccio/Archive/enigma2-pli-nightly.git'...
    remote: Counting objects: 87918, done.
    remote: Compressing objects: 100% (21239/21239), done.
    remote: Total 87918 (delta 71269), reused 83001 (delta 66601)
    Receiving objects: 100% (87918/87918), 44.68 MiB | 2.11 MiB/s, done.
    Resolving deltas: 100% (71269/71269), done.
    patching file configure.ac
    Hunk #3 FAILED at 330.
    Hunk #4 succeeded at 374 (offset -1 lines).
    1 out of 4 hunks FAILED -- saving rejects to file configure.ac.rej
    patching file data/skin_display_default.xml
    patching file lib/base/etpm.cpp
    Hunk #5 succeeded at 123 (offset 5 lines).
    Hunk #6 succeeded at 156 (offset 5 lines).
    Hunk #7 succeeded at 189 (offset 5 lines).
    patching file lib/base/filepush.cpp
    Hunk #2 succeeded at 67 (offset 1 line).
    Hunk #3 succeeded at 157 (offset 1 line).
    Hunk #4 succeeded at 232 (offset 1 line).
    patching file lib/base/filepush.h
    patching file lib/base/ioprio.cpp
    patching file lib/base/Makefile.inc
    patching file lib/base/smartptr.h
    patching file lib/driver/Makefile.inc
    patching file lib/driver/rc.cpp
    patching file lib/driver/vfd.cpp
    patch: **** malformed patch at line 785: 
    
    patching file lib/python/Plugins/Extensions/Makefile.am
    Hunk #1 succeeded at 2 with fuzz 2 (offset -8 lines).
    patching file lib/python/Plugins/Extensions/fs9000VFD/__init__.py
    patching file lib/python/Plugins/Extensions/fs9000VFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/fs9000VFD/Makefile.am
    patching file lib/python/Plugins/Extensions/fs9000VFD/plugin.py
    patching file lib/python/Plugins/Extensions/fs9000VFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/fs9000VFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/fs9000VFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/fs9000VFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/fs9000VFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/fs9000VFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file lib/python/Plugins/Extensions/hs7110VFD/__init__.py
    patching file lib/python/Plugins/Extensions/hs7110VFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/hs7110VFD/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7110VFD/plugin.py
    patching file lib/python/Plugins/Extensions/hs7110VFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7110VFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/hs7110VFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7110VFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7110VFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7110VFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file lib/python/Plugins/Extensions/hs8200VFD/__init__.py
    patching file lib/python/Plugins/Extensions/hs8200VFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/hs8200VFD/Makefile.am
    patching file lib/python/Plugins/Extensions/hs8200VFD/plugin.py
    patching file lib/python/Plugins/Extensions/hs8200VFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/hs8200VFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/hs8200VFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/hs8200VFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/hs8200VFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/hs8200VFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file lib/python/Plugins/Extensions/hs9510VFD/__init__.py
    patching file lib/python/Plugins/Extensions/hs9510VFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/hs9510VFD/Makefile.am
    patching file lib/python/Plugins/Extensions/hs9510VFD/plugin.py
    patching file lib/python/Plugins/Extensions/hs9510VFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/hs9510VFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/hs9510VFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/hs9510VFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/hs9510VFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/hs9510VFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file lib/python/Plugins/Extensions/hs7810aVFD/__init__.py
    patching file lib/python/Plugins/Extensions/hs7810aVFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/hs7810aVFD/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7810aVFD/plugin.py
    patching file lib/python/Plugins/Extensions/hs7810aVFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7810aVFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/hs7810aVFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7810aVFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7810aVFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/hs7810aVFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file lib/python/Plugins/Extensions/spark7162VFD/__init__.py
    patching file lib/python/Plugins/Extensions/spark7162VFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/spark7162VFD/Makefile.am
    patching file lib/python/Plugins/Extensions/spark7162VFD/plugin.py
    patching file lib/python/Plugins/Extensions/spark7162VFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/spark7162VFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/spark7162VFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/spark7162VFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/spark7162VFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/spark7162VFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file lib/python/Plugins/Extensions/sparkVFD/__init__.py
    patching file lib/python/Plugins/Extensions/sparkVFD/vfddisplay.png
    patching file lib/python/Plugins/Extensions/sparkVFD/Makefile.am
    patching file lib/python/Plugins/Extensions/sparkVFD/plugin.py
    patching file lib/python/Plugins/Extensions/sparkVFD/meta/Makefile.am
    patching file lib/python/Plugins/Extensions/sparkVFD/meta/plugin_vfd-icons.xml
    patching file lib/python/Plugins/Extensions/sparkVFD/locale/Makefile.am
    patching file lib/python/Plugins/Extensions/sparkVFD/locale/nl/Makefile.am
    patching file lib/python/Plugins/Extensions/sparkVFD/locale/nl/LC_MESSAGES/Makefile.am
    patching file lib/python/Plugins/Extensions/sparkVFD/locale/nl/LC_MESSAGES/VFD-Icons.po
    patching file data/rc_models/rc_models.cfg
    Hunk #1 FAILED at 19.
    1 out of 1 hunk FAILED -- saving rejects to file data/rc_models/rc_models.cfg.rej
    patching file data/rc_models/fs9000.png
    patching file data/rc_models/fs9000.xml
    patching file data/rc_models/hs7110.png
    patching file data/rc_models/hs7110.xml
    patching file data/rc_models/hs9510.png
    patching file data/rc_models/hs9510.xml
    patching file data/rc_models/spark.png
    patching file data/rc_models/spark.xml
    make: *** [.deps/enigma2-pli-nightly.do_prepare] Fehler 1
    ciccio@ciccio-VirtualBox:~/opti/StartHere-master/cdk$


  12. #10
    Developer
    Registriert seit
    18.07.2012
    Ort
    Ridderkerk, Niederlande
    Beiträge
    634
    Thanks
    144
    Thanked 712 Times in 304 Posts
    Stimmt. Diff0 baut immer mit den neuesten Stand des OpenPli, im Praxis ist das die Version vom Gestern. Es gibt zwar ein Patch fuer Diff0 im git, aber um die correct arbeiten zu lassen wuerde es notwendig sein diese Patch fast taeglich an zu passen und das ist ein Bisschen schwer. Deswegen die Text: Can fail due to outdated patch.

    Diff 2 und hoeher beziehen sich auf fruehere Versionen von OpenPli, und die sollen immer einwandfrei funktionieren.

    Inzwischen ist Diff2 schjon mehr als 6 Monaten alt, und es waere schon wen Jemanden Zeit hat das zu updaten. Ich bin gerade sehr beschaeftigt mit die neuen Fortis Receivern.

    Versuch mal 2 als Wahl am diesem Pukt, die Build sollte damit klappen.

    Gruesse,


    Audioniek.
    Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
    Sats: Astra 1, 2 & 3, Hotbird
    Main activity: building my own E2 images for Fortis receivers

  13. The Following 2 Users Say Thank You to Audioniek For This Useful Post:



Berechtigungen

  • Neue Themen erstellen: Ja
  • Themen beantworten: Ja
  • Anhänge hochladen: Ja
  • Beiträge bearbeiten: Ja
  •