fehler beim bauen mit Audioniek git

[turulbird]

No problem, I can test... three UFS 910.

They succeed only once.
Thank you for your work!




@DboxOldie

I choose always the default, 191 player.

[turulbird]

The build image UFS 910 rcS 4,4 kilobyte <==> HDMU image UFS 910 rcS 19,5 kilobyte

[bonkel]

dont mess up with hdmu files...we have a rcs for all boxes....

[turulbird]

I know, I looked.

Only that could possibly be in the wrong in build?

[turulbird]

12:0

INIT: version 2.88 booting
WAIT 1 min
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.067426 seconds, 59.3MB/s
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.067725 seconds, 59.1MB/s
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 432c0
seeking to 59878
seeking to 598b0
seeking to 598e8
seeking to 5f3d8
seeking to 5f3e4
seeking to 5f3f0
seeking to 62664
seeking to 64700
Starting DEBUG Interface
[mountall] Mounting local filesystems...
mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
Cleaning /tmp /var/run /var/lock.
[hostname] Hostname: ufs910
starting telnetd
LOADING MODULES
Setting new flags
init embxshell
init embxmailbox
init embxshm
init mme_host
init AVS
init stmfb
init player
init player 191
insmod: can't insert '/lib/modules/ksound.ko': invalid module format
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
init lircd
init frontpanel
lircd-0.9.0[1362]: lircd(default) ready, using /var/run/lirc/lircd
1W boxtype
Model: 'ufs910'
vBoxType: 1
Starting portmap daemon....
Starting FTP server: vsftpd.
Thu Jan  1 12:00:00 CET 2009
LOADING Enigma2
starting Enigma2 ->

(enigma2:1388): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though.
PYTHONPATH: /usr/lib/enigma2/python
DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3
ENIGMA2_DEBUG settings: Level=3
STMFBIO_BLT: Invalid argument
Segmentation fault
enigma2 ended <- RTV:  139
*
ERROR
starting Enigma2 ->
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
Sending all processes the TERM signal...done.
lircd-0.9.0[1362]: caught signal
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
swapoff: can't stat 'LABEL=SWAPPART': No such file or directory
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

[turulbird]

I built Fedora 23 64 bit.
It was build executed without error (so far), but I had a couple of trouble:

libtool: install: /usr/bin/install -c .libs/libid3tag.a /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libid3tag.a
libtool: install: chmod 644 /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libid3tag.a
libtool: install: sh4-linux-ranlib /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libid3tag.a
libtool: warning: remember to run 'libtool --finish /usr/lib'
make[4]: Leaving directory '/home/b/StartHereAudioniek/cdk/libid3tag-0.15.1b'
make[3]: Leaving directory '/home/b/StartHereAudioniek/cdk/libid3tag-0.15.1b'
make[2]: Leaving directory '/home/b/StartHereAudioniek/cdk/libid3tag-0.15.1b'

make[2]: Leaving directory '/home/b/StartHereAudioniek/cdk/readline-6.2/examples'
mv /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libreadline.a  /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libreadline.old
mv: stat ”/home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libreadline.a” unsuccessful: No files or directory
Makefile:228: recipe for target 'install-static' failed
make[1]: [install-static] Error 1 (ignored)
/usr/bin/install -c -m 644 libreadline.a /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libreadline.a
test -n "sh4-linux-ranlib" && sh4-linux-ranlib /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libreadline.a
mv /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libhistory.a  /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libhistory.old
mv: stat ”/home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libhistory.a” unsuccessful: No files or directory
Makefile:228: recipe for target 'install-static' failed
make[1]: [install-static] Error 1 (ignored)
/usr/bin/install -c -m 644 libhistory.a /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libhistory.a
test -n "sh4-linux-ranlib" && sh4-linux-ranlib /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libhistory.a
make[1]: Leaving directory '/home/b/StartHereAudioniek/cdk/readline-6.2'
rm -rf readline-6.2
touch .deps/libreadline/

make[1]: Leaving directory '/home/bl/StartHereAudioniek/cdk/gst-plugins-bad-1.6.1'
Can't open /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libgstbasevideo-1.0.la: No files or directory, <> line 41.
Can't open /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libgstsignalprocessor-1.0.la: No files or directory, <> line 123.
rm -rf gst-plugins-bad-1.6.1
touch .deps/gst_plugins_bad

Run ... Run...

Build of Enigma2 for ufs910 successfully completed.

46M
-rw-r--r--. 1 33 jún 21 21.21 ufs910_enigma2_USB_CDK-rev982.md5
-rw-r--r--. 1 46M jún 21 21.21 ufs910_enigma2_USB_CDK-rev982.tar.gz

-- Finished -----------------------------------------------------------

And run???

[Audioniek]

The first thing I note is that you keep changing the operating system you build on. In principle this should not make a difference: it either builds or does not. If it builds to completion, the resulting image should be the same irrespective of the operating system. Most people use either Ubuntu (preferably an LTS edition) or Linux Mint. I test from time to time with Fedora, OpenSUSE and Centos, both 32 and 64 editions. They all should work.

The second thing I noted is that you keep having insmod problems in the rcS, which should not occur at all. These occur when when .ko's do not match the kernel. Normally they are always built as a pair, or you should check that they are.
This points to either a corrupt build environment or not performing make distclean prior to a build (this remark has been made before). make distclean is automatic if the image type (E2/Neutrino/Tvheadend) is changed, but is NOT when a build for only a different receiver is performed.

Regarding the use of ./build, only use it in the same terminal session as you ran ./make.sh in, as the latter sets up essential environment variables. If in doubt, run ./make.sh. To enable repeated invocations of ./make.sh with the same setting, I usually create a litte executable text file with the desired settings like this:

./make.sh 1 5 N 2 3 1 2 2

Regarding the previous post, if the player modules do not insmod, then enigma2 will either not run at all or abort with an error because essential resources are missing, which it did.

mv: stat ”/home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libreadline.a” unsuccessful: No files or directory
mv: stat ”/home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libhistory.a” unsuccessful: No files or directory

These two are not occurring in my test build.

Can't open /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libgstbasevideo-1.0.la: No files or directory, <> line 41.
Can't open /home/b/StartHereAudioniek/tufsbox/cdkroot/usr/lib/libgstsignalprocessor-1.0.la: No files or directory, <> line 123.

But these two are, and they are therefore normal.

I usually try to mimic your builds and my builds usually do not have the problems you come up with. Testing a Kathrein image I cannot do as I do not have a Kathrein.

Regards,

Audioniek.

[turulbird]

If I'm building a new one, I've always run start pull and make distclean...

I use build command: ./build -j2, not yes.


While I am trying to build neutrino HD2-exp usb image:

15M
-rw-r--r--. 1 33 jún 22 00.14 ufs910_neutrino_USB_CDK-rev982_HAL-revXXX_NMP-revXXX.md5
-rw-r--r--. 1 15M jún 22 00.14 ufs910_neutrino_USB_CDK-rev982_HAL-revXXX_NMP-revXXX.tar.gz

[Audioniek]

After the make distclean you should run ./make.sh, not ./build. ./build does not accept any parameters, so adding -j2 has no effect. The build environment uses parallel makes automatically; ./make.sh first determines the number of CPU cores and then adds a -jx to each make command with x the number of cores.

Regards,

Audioniek.

[max]

@Audioniek
Die Änderung $(MAKE) -j$(MAKE_JOBS) kann man sich auch sparen, reicht schon, wenn man das per MAKEFLAGS mit gibt.

zb. so in buildenv.mk eintragen, dann muss man nichts weiter ändern und alles was mehr als 1 beim bauen nutzen kann, nimmt es dann auch.

CPU_CORES ?= $(shell getconf _NPROCESSORS_ONLN || echo 1)
MAKEFLAGS+=-j$(CPU_CORES)
export MAKEFLAGS