werde ich machen danke
werde ich machen danke
hello Audioniek ,
As you said , after cleaning the Archive directory and a fresh pull the new build ended with success .
Regarding the 3G modem support , here is the openAR repo , take a look in ( when you have time )
Unfortunately this team doesn't support the hs7x1x fortis model : it's a remake of duckbox tdt in wich they add this option . The most important to notify is the changes in the .config file specially "usb_networking_adapters" ; ppp directory and files (*modem*) added into cdk/root/etc/ also pppd application add into contrib_apps.mk file .
some years ago it was impossible for me to install E2 into flash in my box, thanks to you I have done; Now I want (and many other peaple) to have this option to enjoy it (my box) where I have only my usb key to have internet access
b Regards
Geändert von kader_73 (20.01.2016 um 19:49 Uhr)
hs7819 @E2_sh4 ~~ NilSat(7W)_Astra(19.2E)
bekomm diesen fehler beim bau eines e2 image
make install DESTDIR=/home/ciccio81/Audio/tufsbox/cdkroot && perl -pi -e "s,^prefix=.*$,prefix=/home/ciccio81/Audio/tufsbox/cdkroot/usr," /home/ciccio81/Audio/tufsbox/cdkroot/usr/lib/pkgconfig/python-2.7.pc
autoreconf: Entering directory `Modules/_ctypes/libffi'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
libtoolize: copying file `m4/libtool.m4'
libtoolize: copying file `m4/ltoptions.m4'
libtoolize: copying file `m4/ltsugar.m4'
libtoolize: copying file `m4/ltversion.m4'
libtoolize: copying file `m4/lt~obsolete.m4'
autoreconf: running: /usr/bin/autoconf --force
configure.ac:446: error: possibly undefined macro: LT_SYS_SYMBOL_USCORE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
make: *** [.deps/python] Fehler 1
@ciccio81:
Looks like a failed patch on configure.ac; with a fresh clone of the git I cannot reproduce the problem. What happens if you do a git pull nd rebuild? (Note: assumed Atevio7500 and P217 as build parameters).
Regards,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
@kader_73:
I have had a look at the git you pointed to and have cloned it. It does not build, as it almost 4 years old, poorly maintained and even contains serious errors. At the moment I am trying to complete a build for a Spark7162 and hope to see what is changed and wether or not the 3G support actually works. In the mean time I have acquired a far east cheapo USB modem, that is a clone of one of the modems supposedly supported by the AR-P image. As soon I have something to report, you ill find it in this thread.
Regards,
Audioniek.
- - - Aktualisiert - - -
Wie hast du das gemacht? Es gibt dafuer beim at7500 kein Einstellung!
Wenn ich mich richtig erinnere, fehlt noch immer den Support fuer den heutigen DVB-T tuner in alle gits. Fortis hat glaube ich frueher ein anderes Modell geliefert, es gibt also vielleicht zwei Varianten. Die alteste wird moeglich wohl unterstuetzt.beim neustrart wird er nicht erkannt
Ich werde mal pruefen.
Gruesse,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
es gibt keine soucen im git
hab dann den tuner treiber von bp neutrino image genommen dann ging es
Geändert von ciccio81 (22.01.2016 um 15:39 Uhr)
hello Audioniek ;
Thank you for giving interest to that. The last time you asked the details of a device, now I'm connected with, here's what lsusb command gives:
with which I was able to connect on the original sw on my hs 7810.
.
Bus 001 Device 004: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM
kader@debian-kader:~$
b Regards
hs7819 @E2_sh4 ~~ NilSat(7W)_Astra(19.2E)
Hi!
I'm trying to build the Audioniek git, but error:
What do I do wrong?
Your build environment is ready
Selected receiver : Kathrein UFS-913
Selected kernel : 2.6.32.61_stm24_217
Debug option : Yes
Selected player : Player 191 (stmfb-3.1_stm24_0104)
Selected media framework : gstreamer+libeplayer3
USB WLAN drivers : Yes
Image : Enigma2
Enigma2 diff : 2 (revision: 7d63bf16e99741f0a5798b84a3688759317eecb3)
------------------------------------------------------------------
Do you want to start the build now (Y*/n)? y
run... run.. run..................
make: *** No rule to make target '/home/b/StartHere-master/cdk/Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.config.debug', needed by '.deps/linux-kernel'. Stop.
Not write file .deps/linux-kernel
Ubuntu Mate 16.04 64 bit, E2 UFS 913 albis8000 patch
status:
modified: Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.config
modified: Patches/build-enigma2/linux-sh4-ufs913_setup_stm24_0217.patch
deleted: root/boot/put_your_elf_files_here
Untracked files:
Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.debug.config
Patches/build-enigma2/linux-sh4-2.6.32.61_stm24_217_ufs913.config.debug
Patches/linux-sh4-2.6.32.61_0217_ufs913.config
Patches/linux-sh4-2.6.32.61_0217_ufs913.debug.config
Patches/linux-sh4-2.6.32.61_stm24_217_ufs913.config
Patches/linux-sh4-2.6.32.61_stm24_217_ufs913.config.debug
Patches/linux-sh4-2.6.32.61_stm24_217_ufs913.debug.config
Patches/linux-sh4-ufs913_setup_stm24_0217.patch
Patches/linux-sh4-ufs913_setup_stm24_217.patch
modified: avs/avs_core.c
modified: cic/Makefile
modified: frontcontroller/Makefile
modified: frontends/Makefile
modified: player2_191/linux/drivers/media/dvb/stm/dvb/Makefile
modified: player2_191/linux/drivers/media/dvb/stm/dvb/dvb_module.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_audio.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_avs.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_main.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_video.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/st-merger.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/st-pti.c
...............................................
I'm trying to build UFS 910 image, run, but after 4 hour error:
/opt/StartHere-master/tufsbox/cdkroot/usr/lib -c -D_GNU_SOURCE -DHAVE_FREETYPE2 -I/opt/StartHere-master/tufsbox/cdkroot/usr/include -I/opt/StartHere-master/tufsbox/cdkroot/include/freetype font.c
font.c22: fatal error: ft2build.h: No files or directory
#include <ft2build.h>
compilation terminated.
Makefile:35: recipe for target 'font.o' failed
make[2]: *** [font.o] Error 1
make[2]: Leaving directory '/opt/StartHere-master/cdk/graphlcd-base-touchcol/glcdgraphics'
Makefile recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/StartHere-master/cdk/graphlcd-base-touchcol'
Makefile:4784: recipe for target '.deps/graphlcd' failed
make: *** [.deps/graphlcd] Error 2
root@b:/opt/StartHere-master/cdk#
Can not continue? Alwais to start from scratch?
Lost 4 hour...
Command make -jx not work?
XBMC/Kodi no?
Geändert von turulbird (01.05.2016 um 20:56 Uhr)
As santa remarked: there is no .config for a debug image for an UFS913 when building with patch level P0217. There is one with the very old patch level P0209. If you absolute want a debug image with P0217 you can make a .config yourself:
- Copy the file X/cdk/Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.config to linux-sh4-2.6.32.61_0217_ufs913.config.debug
- Determine the diff between the files linux-sh4-2.6.32.61_0209_ufs913.config and linux-sh4-2.6.32.61_0209_ufs913.config.debug and edit that into linux-sh4-2.6.32.61_0217_ufs913.config.debug.
- Start your build.
The UFS910 build failed in some aspect of the LCD-support. Try to build without it, and see if that build completes. Apparently the module freetype is not built.
Regarding Katrhrein receivers I have to note that these are untested for the simple reason I do not own any of these. The only thing I do is meticulously follow the changes in the ddt-git and hope I made no mistakes there.
XBMC/Kodi was supported a very long time ago. That support was probably dropped because images were getting bigger and bigger, and harder to maintain. Also, I am of the firm opinion you should use a satellite receiver to watch satellite-TV, and not turn it into some play-it-all media box. Also the SH4 CPU is not the most powerful, so the less it has to do, the better it is.
Regards,
Audioniek.
- - - Aktualisiert - - -
Apparently you start a build for the driver directory, which will not work. Always build from the cdk directory. In the cdk directory, always start with ./make.sh. After a build fail and subsequent fix you can use ./build and the build will restart at the point it broke down.
The only two make commands that make sense in this environment are make clean (cleans up enigma2 so it can be rebuilt) and make distclean (returns the build environment to its virgin state.
After a rm in X/cdk/.deps/modulename you can rebuilt that module only by entering make modulename.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
I not have UFS 913 box, only modded UFS 913 img by Raxone for Albis SC8000 iptv box.
XBMC work overclocked sti7105 450@ 800 MHZ Albis SC8000 box, but only HDMI, scart not work. My tv no HDMI, only scart.
KodiDirect well run in PKT Hyperion 5.1 image 720 MHZ.
Copy renamed config file linux-sh4-2.6.32.61_0217_ufs913.config.debug;
build no debug, kernel 209.
The others do not understand: - Determine the diff ...
without it run:
LD arch/sh/boards/mach-hdk7105/built-in.o
CC kernel/sched.o
kernel/sched.c: In function ‘update_sysctl’:
kernel/sched.c:7316:88: warning: comparison of distinct pointer types lacks a cast [enabled by default]
unsigned int cpus = min(num_online_cpus(), 8U);
^
CC kernel/fork.o
CC kernel/exec_domain.o
CC kernel/panic.o
CC kernel/printk.o
CC kernel/cpu.o
CC kernel/exit.o
CC kernel/itimer.o
TIMEC kernel/timeconst.h
Can't use 'defined(@array)' (Maybe you should just omit the defined()?) at kernel/timeconst.pl line 373.
/home/b/StartHere-master/cdk/linux-sh4-2.6.32.46_stm24_0209/kernel/Makefile:129: recipe for target 'kernel/timeconst.h' failed
make[2]: *** [kernel/timeconst.h] Error 255
Makefile:903: recipe for target 'kernel' failed
make[1]: *** [kernel] Error 2
make[1]: Leaving directory '/home/ball/StartHere-master/cdk/linux-sh4-2.6.32.46_stm24_0209'
Makefile:2865: recipe for target '.deps/linux-kernel' failed
make: *** [.deps/linux-kernel] Error 2
....................
After created null files: linux-kernel, continues to run in ./build -j2 command...
My cpu Athlon 64x2 3800+
Only so far:
INSTALL /home/b/StartHere-master/driver/wireless/rtl871x/8712u.ko
DEPMOD 2.6.32.46_stm24_0209
make[2]: Leaving directory '/home/b/StartHere-master/cdk/linux-sh4-2.6.32.46_stm24_0209'
make[1]: Leaving directory '/home/b/StartHere-master/driver'
/home/b/StartHere-master/tufsbox/host/bin/depmod -ae -b /home/b/StartHere-master/tufsbox/cdkroot -F /home/b/StartHere-master/cdk/linux-sh4-2.6.32.46_stm24_0209/System.map -r 2.6.32.46_stm24_0209
FATAL: Could not open '/home/b/StartHere-master/cdk/linux-sh4-2.6.32.46_stm24_0209/System.map': No such file or directory
Makefile:3094: recipe for target '.deps/driver' failed
make: *** [.deps/driver] Error 1
created files: driver, continues to run...
This is correct?
Geändert von turulbird (01.05.2016 um 22:37 Uhr)