fehler beim bauen mit Audioniek git

[ciccio81]

werde ich machen danke

[kader_73]

hello Audioniek ,

As you said , after cleaning the Archive directory and a fresh pull the new build ended with success .

Regarding the 3G modem support , here is the openAR repo , take a look in ( when you have time )
Unfortunately this team doesn't support the hs7x1x fortis model : it's a remake of duckbox tdt in wich they add this option . The most important to notify is the changes in the .config file specially "usb_networking_adapters" ; ppp directory and files (*modem*) added into cdk/root/etc/ also pppd application add into contrib_apps.mk file .

some years ago it was impossible for me to install E2 into flash in my box, thanks to you I have done; Now I want (and many other peaple) to have this option to enjoy it (my box) where I have only my usb key to have internet access

b Regards

[ciccio81]

bekomm diesen fehler beim bau eines e2 image

make install DESTDIR=/home/ciccio81/Audio/tufsbox/cdkroot && perl -pi -e "s,^prefix=.*$,prefix=/home/ciccio81/Audio/tufsbox/cdkroot/usr," /home/ciccio81/Audio/tufsbox/cdkroot/usr/lib/pkgconfig/python-2.7.pc
autoreconf: Entering directory `Modules/_ctypes/libffi'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
libtoolize: copying file `m4/libtool.m4'
libtoolize: copying file `m4/ltoptions.m4'
libtoolize: copying file `m4/ltsugar.m4'
libtoolize: copying file `m4/ltversion.m4'
libtoolize: copying file `m4/lt~obsolete.m4'
autoreconf: running: /usr/bin/autoconf --force
configure.ac:446: error: possibly undefined macro: LT_SYS_SYMBOL_USCORE
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1
make: *** [.deps/python] Fehler 1

[Audioniek]

@ciccio81:

Looks like a failed patch on configure.ac; with a fresh clone of the git I cannot reproduce the problem. What happens if you do a git pull nd rebuild? (Note: assumed Atevio7500 and P217 as build parameters).

Regards,

Audioniek.

[Audioniek]

@kader_73:

I have had a look at the git you pointed to and have cloned it. It does not build, as it almost 4 years old, poorly maintained and even contains serious errors. At the moment I am trying to complete a build for a Spark7162 and hope to see what is changed and wether or not the 3G support actually works. In the mean time I have acquired a far east cheapo USB modem, that is a clone of one of the modems supposedly supported by the AR-P image. As soon I have something to report, you ill find it in this thread.

Regards,

Audioniek.

- - - Aktualisiert - - -

den dvb-t tuner in der rcs aktiviert

Wie hast du das gemacht? Es gibt dafuer beim at7500 kein Einstellung!

beim neustrart wird er nicht erkannt

Wenn ich mich richtig erinnere, fehlt noch immer den Support fuer den heutigen DVB-T tuner in alle gits. Fortis hat glaube ich frueher ein anderes Modell geliefert, es gibt also vielleicht zwei Varianten. Die alteste wird moeglich wohl unterstuetzt.

Ich werde mal pruefen.

Gruesse,

Audioniek.

[ciccio81]

es gibt keine soucen im git

hab dann den tuner treiber von bp neutrino image genommen dann ging es

[kader_73]

hello Audioniek ;

Thank you for giving interest to that. The last time you asked the details of a device, now I'm connected with, here's what lsusb command gives:

.
.
Bus 001 Device 004: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM
kader@debian-kader:~$

with which I was able to connect on the original sw on my hs 7810

b Regards

[turulbird]

Hi!

I'm trying to build the Audioniek git, but error:

What do I do wrong?

Your build environment is ready

Selected receiver : Kathrein UFS-913
Selected kernel : 2.6.32.61_stm24_217
Debug option : Yes
Selected player : Player 191 (stmfb-3.1_stm24_0104)
Selected media framework : gstreamer+libeplayer3
USB WLAN drivers : Yes
Image : Enigma2
Enigma2 diff : 2 (revision: 7d63bf16e99741f0a5798b84a3688759317eecb3)
------------------------------------------------------------------
Do you want to start the build now (Y*/n)? y
run... run.. run..................
make: *** No rule to make target '/home/b/StartHere-master/cdk/Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.config.debug', needed by '.deps/linux-kernel'. Stop.

Not write file .deps/linux-kernel


Ubuntu Mate 16.04 64 bit, E2 UFS 913 albis8000 patch

status:

modified: Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.config
modified: Patches/build-enigma2/linux-sh4-ufs913_setup_stm24_0217.patch
deleted: root/boot/put_your_elf_files_here

Untracked files:
Patches/build-enigma2/linux-sh4-2.6.32.61_0217_ufs913.debug.config
Patches/build-enigma2/linux-sh4-2.6.32.61_stm24_217_ufs913.config.debug
Patches/linux-sh4-2.6.32.61_0217_ufs913.config
Patches/linux-sh4-2.6.32.61_0217_ufs913.debug.config
Patches/linux-sh4-2.6.32.61_stm24_217_ufs913.config
Patches/linux-sh4-2.6.32.61_stm24_217_ufs913.config.debug
Patches/linux-sh4-2.6.32.61_stm24_217_ufs913.debug.config
Patches/linux-sh4-ufs913_setup_stm24_0217.patch
Patches/linux-sh4-ufs913_setup_stm24_217.patch

modified: avs/avs_core.c
modified: cic/Makefile
modified: frontcontroller/Makefile
modified: frontends/Makefile
modified: player2_191/linux/drivers/media/dvb/stm/dvb/Makefile
modified: player2_191/linux/drivers/media/dvb/stm/dvb/dvb_module.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_audio.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_avs.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_main.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/e2_proc/e2_proc_video.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/st-merger.c
modified: player2_191/linux/drivers/media/dvb/stm/dvb/st-pti.c

...............................................

I'm trying to build UFS 910 image, run, but after 4 hour error:

/opt/StartHere-master/tufsbox/cdkroot/usr/lib -c -D_GNU_SOURCE -DHAVE_FREETYPE2 -I/opt/StartHere-master/tufsbox/cdkroot/usr/include -I/opt/StartHere-master/tufsbox/cdkroot/include/freetype font.c
font.c22: fatal error: ft2build.h: No files or directory
#include <ft2build.h>
compilation terminated.
Makefile:35: recipe for target 'font.o' failed
make[2]: *** [font.o] Error 1
make[2]: Leaving directory '/opt/StartHere-master/cdk/graphlcd-base-touchcol/glcdgraphics'
Makefile recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/StartHere-master/cdk/graphlcd-base-touchcol'
Makefile:4784: recipe for target '.deps/graphlcd' failed
make: *** [.deps/graphlcd] Error 2
root@b:/opt/StartHere-master/cdk#

Can not continue? Alwais to start from scratch?
Lost 4 hour...
Command make -jx not work?
XBMC/Kodi no?

[santa]

913, try to build with debug no

[turulbird]

UFS 913, no debug, make -j2 or y -j2 same error:

make[2]: *** /home/b/StartHere-master/cdk/linux-sh4-2.6.32.61_stm24_0217: No files or directory. Stop.
make[2]: Leaving directory '/home/b/StartHere-master/driver'
/home/b/StartHere-master/driver/kernel.make:39: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/home/b/StartHere-master/driver'
Makefile:3094: recipe for target '.deps/driver' failed
make: *** [.deps/driver] Error 2