Ergebnis 1 bis 8 von 8
  1. 31.01.2015 #1
    rangerm
    rangerm ist offline
    VIP Avatar von rangerm
    Registriert seit
    05.05.2012
    Ort
    Bayern
    Beiträge
    301
    Thanks
    124
    Thanked 172 Times in 101 Posts

    HDMU_13668_et8500_OE_1927

    Da Assi läuft schon mal durch

    Startzeit ab Netzschalter 38sec
    Ab Neustart 45sec
    Umschaltzeiten sind schon mal sehr sehr..... viel besser wie bei ATV,bin ehrlich gesagt schockiert wie schlecht die sind.
    Aber egal kommen wir zum Image, der Grund warum man diese Box kauft ist natürlich der Display.

    Im Display Menü fehlt die Funktion den live TV abzuschalten.
    Einstellung (Power on Diplay) ohne Funktion.
    LCD Linux hab jetzt die vom Feed und atv forum getestet beide ohne funktion fehlende Module.

    Wenn ich mehr Zeit hab beschäftige ich mich selbt mit dem Problem aber wer´s anschauen will

    Hab mal bisschen mitgelogt....


    Vom Start
    Code:
     

 hdmu 4 et8500
 

 

 

 et8500 login: root
 Password: 
 Last login: Sat Jan 31 12:11:04 CET 2015 on pts/1
 HDMU 13668
 Git 1926
 [1;31m
                 #     # ######  #     # #     #
                 #     # #     # ##   ## #     #
                 #     # #     # # # # # #     #
                 ####### #     # #  #  # #     #
                 #     # #     # #     # #     #
                 #     # #     # #     # #     # 
                 #     # ######  #     #  ##### 
 

 [0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
 [0;35m+         [0;37mBox [0;35m= [1;32met8500
 [0;35m+    [0;37mHDMU Rev [0;35m= [1;32m13668
 [0;35m+     [0;37mGIT Rev [0;35m= [1;32m1926
 [0;35m+    [0;37mHostname [0;35m= [1;32met8500
 [0;35m+      [0;37mKernel [0;35m= [1;32m3.14.21
 [0;35m+      [0;37mUptime [0;35m=[1;32m 12:11:47 up 15 min,  load average: 0.47, 0.19, 0.10
 [0;35m+         [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1  FPU V0.1
 [0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
 [0;35m+ [0;37mMemory Free [0;35m= [1;32m175676 kB
 [0m
 root@et8500:~# [6n[6n[eDVBCAService] free slot 0 demux 0 for service 1:0:1:445C:453:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:1:445C:453:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 20
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
 [SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
 [SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
 connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
 ]
 ---- saving lame channel db
 saved 246 channels and 7063 services!
 release cached channel (timer timeout)
 [eDVBLocalTimerHandler] remove channel 0x1c0e390
 [eEPGCache] remove channel 0x1c0e390
 stop release channel timer
 [EPGC] store epg to realpath '/media/hdd/epg.dat'
 [EPGC] 8772 events written to /hdd/epg.dat
 set RTC to previous valid time
 close frontend 0
 - (41) eServiceFactoryDVD
 - (41) eServiceFactoryHDMI
 - (41) eServiceFactoryM2TS
 - (41) eServiceFactoryMP3
 - (41) eServiceFactoryFS
 - (41) eServiceFactoryDVB
 - (41) Encoders
 - (41) Stream server
 - (40) eServiceCenter
 - (35) CI Slots
 - (35) CA handler
 - (30) eActionMap
 - (22) Hdmi CEC driver
 - (21) input device driver
 - (20) DVB-CI UI
 - (20) UHF Modulator
 - (20) RC Input layer
 - (20) misc options
 - (20) AVSwitch Driver
 - (15) eWindowStyleManager
 - (10) gRC
 waiting for gRC thread shutdown
 gRC thread has finished
 - (9) GFBDC
 - (9) gLCDDC
 - (9) Font Render Class
 - (8) graphics acceleration manager
 - (5) Tuxtxt
 - (1) Background File Eraser
 reached rl -1
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
 + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 BCM accel interface not available - Operation not permitted
 + (9) GFBDC
 10800k video mem
  - double buffering available!
 3600kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 + (9) gLCDDC
 found OLED display!
 lcd buffer 0x7dc078 8448 bytes, stride 132
 LCD resolution: 132 x 64 x 8 (stride: 132)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) UHF Modulator
 couldnt open /dev/rfmod0!!!!
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "dreambox remote control (native)" is a remotecontrol
 Input device "dreambox advanced remote control (native)" is a remotecontrol
 Found 2 input devices.
 + (22) Hdmi CEC driver
 eHdmiCEC: detected physical address change: 1000 --> 3000
 eHdmiCEC: send message 84 30 00 01 
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 done, found 1 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 loaded 246 channels/transponders and 7063 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 found 1 adapter, 2 frontends(2 sim) and 7 demux, boxtype 3
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 [HardwareInfo] Scanning hardware info
 Detected: et8500 (0.91-150107-14.2)
 couldn't open /proc/stb/misc/12V_output
 [Harddisk] enumerating block devices...
 new Harddisk sda -> /dev/sda -> /dev/sda
 SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
 defaulting to standard display skin... skin_display.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr AVL6211, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr AVL6211, need rotorworkaround No, enabled No, DVB-S2 Yes
 slot: 0 configmode: simple
 diseqcmode:  diseqc_a_b_c_d
 slot: 1 configmode: nothing
 sec config completed
 main thread is non-idle! display spinner!
 Renumbering...
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
 Activating keymap: Default (US)
 [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
 Activating language Deutsch
 --> setting scaler_sharpness to: 0000000D
 [ePopen] command: ip -o addr show dev eth0
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 HDMU Center: Import evfd failed
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 Media Center: Import evfd failed
 Plugin  Extensions/LCD4linux failed to load: No module named simplejson
 Traceback (most recent call last):
   File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
   File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
   File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 51, in <module>
     import simplejson
 ImportError: No module named simplejson
 getModeList for port DVI-PC
 remove DVI-PC because of not existing modes
 getModeList for port YPbPr
 getModeList for port Scart
 getModeList for port DVI
 hotplug on dvi
 setMode - port: DVI mode: 1080i rate: multi
 starting hotplug handler
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [EPGC] 8772 events read from /hdd/epg.dat
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 [SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
 [SKIN] Parsing embedded skin <embedded-in-'Mute'>
 setValue 50
 Setvolume: 100 100 (raw)
 Setvolume: 0 0 (-1db)
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:1:445C:453:1:C00000:0:0:0:
 getResolvedKey config.usage.remote_fallback failed !! (Typo??)
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 allocate channel.. 0453:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 1944 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
 [SEC] set static current limiting
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 1
 [SEC] sleep 200ms
 0.0.0.0
 192.168
 nameservers: [[192, 168, 2, 1]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1], 'address': [192, 168, 2, 12]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 2, 12], 'up': True, 'mac': '00:16:b4:06:28:da', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 28(16)
 Unhandled error in Deferred:
 Unhandled Error
 Traceback (most recent call last):
   File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
     
   File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
     
   File "/usr/lib/python2.7/threading.py", line 504, in run
     
 --- <exception caught here> ---
   File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
     
   File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
     
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
     return (Bus(),)
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
     self.devices = [Device(d) for d in core.find(find_all=True)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 846, in find
     raise ValueError('No backend available')
 exceptions.ValueError: No backend available
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01038f3(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 [SEC] sleep 500ms
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x1c0e540 running
 [eEPGCache] channel 0x1c0e540 running
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 1 audio stream(s) (0100), and the pcr pid is 00ff, and the text pid is 0020
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=255, apid=256
 DMX_SET_PES_FILTER(0xff) - pcr - ok
 DEMUX_START - pcr - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PAUSE - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0xff) - video - ok
 DEMUX_START - video - ok
 VIDEO_FREEZE - ok
 VIDEO_PLAY - ok

 DMX_SET_PES_FILTER(0x20) - ttx - ok
 DEMUX_START - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 20
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 VIDEO_CONTINUE - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - TuxTxt running thread...(020)
 ok
 disable teletext subtitles page ffffffffffffffff (und)
 not pauseable.
 not pauseable.
 [eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 use pmtpid 0060 for service_id 445c
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 Plugin  Extensions/LCD4linux failed to load: No module named simplejson
 Traceback (most recent call last):
   File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
   File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
   File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 51, in <module>
     import simplejson
 ImportError: No module named simplejson
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
 decoder state: play, vpid=255, apid=256
 poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [SEC] set dynamic current limiting
 [Dish] tuning failed
 [EPGC] start caching events(1422702724)
    Während des aufrufen von den Menüs wo ich angesprochen hab.

    Code:
    et8500 login: root Password: 
 HDMU 13668
 Git 1926
 [1;31m
                 #     # ######  #     # #     #
                 #     # #     # ##   ## #     #
                 #     # #     # # # # # #     #
                 ####### #     # #  #  # #     #
                 #     # #     # #     # #     #
                 #     # #     # #     # #     # 
                 #     # ######  #     #  ##### 
 

 [0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
 [0;35m+         [0;37mBox [0;35m= [1;32met8500
 [0;35m+    [0;37mHDMU Rev [0;35m= [1;32m13668
 [0;35m+     [0;37mGIT Rev [0;35m= [1;32m1926
 [0;35m+    [0;37mHostname [0;35m= [1;32met8500
 [0;35m+      [0;37mKernel [0;35m= [1;32m3.14.21
 [0;35m+      [0;37mUptime [0;35m=[1;32m 11:47:04 up 0 min,  load average: 0.18, 0.04, 0.01
 [0;35m+         [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1  FPU V0.1
 [0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
 [0;35m+ [0;37mMemory Free [0;35m= [1;32m201324 kB
 [0m
 root@et8500:~# [6n[6n[EPGC] nownext finished(1422701228)
 [SKIN] No skin to read...
 [SKIN] No skin to read...
 [ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/attention-53.png
 [Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/attention-53.png not found!. Please contact the skin's author!
 [ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/info-53.png
 [Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/info-53.png not found!. Please contact the skin's author!
 [ePNG] couldn't open /usr/share/enigma2/skin_default/HDMUSlim/icons/question-53.png
 [Skin] Error: {skin.xml}: pixmap file /usr/share/enigma2/skin_default/HDMUSlim/icons/question-53.png not found!. Please contact the skin's author!
 [SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
 [EPGC] schedule finished(1422701238)
 Unhandled error in Deferred:
 Unhandled Error
 Traceback (most recent call last):
   File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
     
   File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
     
   File "/usr/lib/python2.7/threading.py", line 504, in run
     
 --- <exception caught here> ---
   File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
     
   File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
     
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
     return (Bus(),)
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
     self.devices = [Device(d) for d in core.find(find_all=True)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
     return [d for d in device_iter(k, v)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
     for dev in backend.enumerate_devices():
   File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
     _check(_lib.usb_find_busses())
   File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
     
   File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
     
 exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: known incorrect sRGB profile
 Unhandled error in Deferred:
 Unhandled Error
 Traceback (most recent call last):
   File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
     
   File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
     
   File "/usr/lib/python2.7/threading.py", line 504, in run
     
 --- <exception caught here> ---
   File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
     
   File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
     
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
     return (Bus(),)
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
     self.devices = [Device(d) for d in core.find(find_all=True)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
     return [d for d in device_iter(k, v)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
     for dev in backend.enumerate_devices():
   File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
     _check(_lib.usb_find_busses())
   File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
     
   File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
     
 exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
 [SKIN] No skin to read...
 [SKIN] No skin to read...
 warning, skin is missing element description in <class 'Screens.Setup.Setup'>
 [SKIN] No skin to read...
 Unhandled error in Deferred:
 Unhandled Error
 Traceback (most recent call last):
   File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
     
   File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
     
   File "/usr/lib/python2.7/threading.py", line 504, in run
     
 --- <exception caught here> ---
   File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
     
   File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
     
   File "/usr/lib/enigma2/python/Components/Lcd.py", line 54, in JobTask
     
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 333, in busses
     return (Bus(),)
   File "/usr/lib/python2.7/site-packages/usb/legacy.py", line 329, in __init__
     self.devices = [Device(d) for d in core.find(find_all=True)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 851, in find
     return [d for d in device_iter(k, v)]
   File "/usr/lib/python2.7/site-packages/usb/core.py", line 821, in device_iter
     for dev in backend.enumerate_devices():
   File "/usr/lib/python2.7/site-packages/usb/backend/libusb01.py", line 390, in enumerate_devices
     _check(_lib.usb_find_busses())
   File "/usr/lib/python2.7/ctypes/__init__.py", line 378, in __getattr__
     
   File "/usr/lib/python2.7/ctypes/__init__.py", line 383, in __getitem__
     
 exceptions.AttributeError: /usr/bin/enigma2: undefined symbol: usb_find_busses
    Vu+DUO1&2,UFS922
    WaveFrontier T 90|19,2;13;28,2;23,5
    Zitieren Zitieren

  2. 31.01.2015 #2
    bonkel
    bonkel ist offline
    Boardgründer/Administrator Avatar von bonkel
    Registriert seit
    03.05.2012
    Beiträge
    8.468
    Thanks
    509
    Thanked 4.504 Times in 1.979 Posts
    fur lcd4linux musst du nach dem installieren ein neustsrt machen dann is das problem wegen gehlendem modul wev

    Gehasst, Verdammt, Vergöttert
    Fragen gehören ins Forum nicht in meinem Postfach!
    >> Häufig gestellte Fragen <<
    Zitieren Zitieren

  3. 31.01.2015 #3
    rangerm
    rangerm ist offline
    VIP Avatar von rangerm
    Registriert seit
    05.05.2012
    Ort
    Bayern
    Beiträge
    301
    Thanks
    124
    Thanked 172 Times in 101 Posts
    Also LCD Linux ist da jetzt hab ich die Settings versucht zu laden.
    Des ganze endet dann in einer schleife zwischen Boot bild und TVbild auf den TV sowie display.
    Sie ist Quasi nicht bedienbar

    Siehe log.Installiere dann aber noch mal neu glaub der lcdlinux mix tut nicht gut ; )

    Code:
     

 hdmu 4 et8500
 

 

 

 et8500 login: root
 Password: 
 Last login: Sat Jan 31 12:59:06 CET 2015 on pts/1
 HDMU 13668
 Git 1926
 [1;31m
                 #     # ######  #     # #     #
                 #     # #     # ##   ## #     #
                 #     # #     # # # # # #     #
                 ####### #     # #  #  # #     #
                 #     # #     # #     # #     #
                 #     # #     # #     # #     # 
                 #     # ######  #     #  ##### 
 

 [0;35m+++++++++++++++++: [0;37mSystem Data[0;35m :+++++++++++++++++++
 [0;35m+         [0;37mBox [0;35m= [1;32met8500
 [0;35m+    [0;37mHDMU Rev [0;35m= [1;32m13668
 [0;35m+     [0;37mGIT Rev [0;35m= [1;32m1926
 [0;35m+    [0;37mHostname [0;35m= [1;32met8500
 [0;35m+      [0;37mKernel [0;35m= [1;32m3.14.21
 [0;35m+      [0;37mUptime [0;35m=[1;32m 12:59:31 up 1 min,  load average: 1.02, 0.33, 0.11
 [0;35m+         [0;37mCPU [0;35m=[1;32m Broadcom BMIPS5000 V1.1  FPU V0.1
 [0;35m+[0;37mMemory Total [0;35m= [1;32m310316 kB
 [0;35m+ [0;37mMemory Free [0;35m= [1;32m206256 kB
 [0m
 root@et8500:~# [6n[6nsec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr AVL6211, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr AVL6211, need rotorworkaround No, enabled No, DVB-S2 Yes
 slot: 0 configmode: simple
 diseqcmode:  diseqc_a_b_c_d
 slot: 1 configmode: nothing
 sec config completed
 main thread is non-idle! display spinner!
 Renumbering...
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
 Activating keymap: Default (US)
 [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
 Activating language Deutsch
 --> setting scaler_sharpness to: 0000000D
 [ePopen] command: ip -o addr show dev eth0
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 HDMU Center: Import evfd failed
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 Media Center: Import evfd failed
 [LCD4linux] libusb found :-) 2015-01-26-(no branch)
 getModeList for port DVI-PC
 remove DVI-PC because of not existing modes
 getModeList for port YPbPr
 getModeList for port Scart
 getModeList for port DVI
 hotplug on dvi
 setMode - port: DVI mode: 1080i rate: multi
 starting hotplug handler
 [ePopen] command: ping -c 1 www.openpli.org
 [ePopen] command: ping -c 1 www.google.nl
 [ePopen] command: ping -c 1 www.google.com
 [ePopen] command: ping -c 1 www.openpli.org
 [ePopen] command: ping -c 1 www.google.nl
 [ePopen] command: ping -c 1 www.google.com
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [EPGC] /hdd/epg.dat not found, try /epg.dat
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 [SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
 [SKIN] Parsing embedded skin <embedded-in-'Mute'>
 setValue 50
 Setvolume: 100 100 (raw)
 Setvolume: 0 0 (-1db)
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:1:445C:453:1:C00000:0:0:0:
 getResolvedKey config.usage.remote_fallback failed !! (Typo??)
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 RemovePopup, id = ZapError
 allocate channel.. 0453:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 1944 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
 [SEC] set static current limiting
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 1
 [SEC] sleep 200ms
 0.0.0.0
 192.168
 nameservers: [[192, 168, 2, 1]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1], 'address': [192, 168, 2, 12]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 2, 12], 'up': True, 'mac': '00:16:b4:06:28:da', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01038f3(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 [SEC] sleep 500ms
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x1e4bd30 running
 [eEPGCache] channel 0x1e4bd30 running
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 1 audio stream(s) (0100), and the pcr pid is 00ff, and the text pid is 0020
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=255, apid=256
 DMX_SET_PES_FILTER(0xff) - pcr - ok
 DEMUX_START - pcr - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PAUSE - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0xff) - video - ok
 DEMUX_START - video - ok
 VIDEO_FREEZE - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x20) - ttx - ok
 DEMUX_START - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 20
 VIDEO_SLOWMOTION(0) - TuxTxt running thread...(020)
 ok
 VIDEO_FAST_FORWARD(0) - ok
 VIDEO_CONTINUE - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 [eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
 RemovePopup, id = ZapError
 use pmtpid 0060 for service_id 445c
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
 decoder state: play, vpid=255, apid=256
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 AT plugin not found
 ER plugin not found
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [SEC] set dynamic current limiting
 [Dish] tuning failed
 [EPGC] start caching events(1422705583)
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 *** Error in `/usr/bin/enigma2': double free or corruption (out): 0x758622c0 ***
 Aborted
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
 + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 BCM accel interface not available - Operation not permitted
 + (9) GFBDC
 10800k video mem
  - double buffering available!
 3600kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 + (9) gLCDDC
 found OLED display!
 lcd buffer 0x7dc078 8448 bytes, stride 132
 LCD resolution: 132 x 64 x 8 (stride: 132)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) UHF Modulator
 couldnt open /dev/rfmod0!!!!
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "dreambox remote control (native)" is a remotecontrol
 Input device "dreambox advanced remote control (native)" is a remotecontrol
 Found 2 input devices.
 + (22) Hdmi CEC driver
 eHdmiCEC: detected physical address change: 1000 --> 3000
 eHdmiCEC: send message 84 30 00 01 
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 done, found 1 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 loaded 246 channels/transponders and 7063 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 found 1 adapter, 2 frontends(2 sim) and 7 demux, boxtype 3
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 [HardwareInfo] Scanning hardware info
 Detected: et8500 (0.91-150107-14.2)
 couldn't open /proc/stb/misc/12V_output
 [Harddisk] enumerating block devices...
 SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
 defaulting to standard display skin... skin_display.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr AVL6211, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr AVL6211, need rotorworkaround No, enabled No, DVB-S2 Yes
 slot: 0 configmode: simple
 diseqcmode:  diseqc_a_b_c_d
 slot: 1 configmode: nothing
 sec config completed
 main thread is non-idle! display spinner!
 Renumbering...
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
 Activating keymap: Default (US)
 [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
 Activating language Deutsch
 --> setting scaler_sharpness to: 0000000D
 [ePopen] command: ip -o addr show dev eth0
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 HDMU Center: Import evfd failed
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 Media Center: Import evfd failed
 [LCD4linux] libusb found :-) 2015-01-26-(no branch)
 getModeList for port DVI-PC
 remove DVI-PC because of not existing modes
 getModeList for port YPbPr
 getModeList for port Scart
 getModeList for port DVI
 hotplug on dvi
 setMode - port: DVI mode: 1080i rate: multi
 starting hotplug handler
 [ePopen] command: ping -c 1 www.openpli.org
 [ePopen] command: ping -c 1 www.google.nl
 [ePopen] command: ping -c 1 www.google.com
 [ePopen] command: ping -c 1 www.openpli.org
 [ePopen] command: ping -c 1 www.google.nl
 [ePopen] command: ping -c 1 www.google.com
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [EPGC] /hdd/epg.dat not found, try /epg.dat
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 [SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
 [SKIN] Parsing embedded skin <embedded-in-'Mute'>
 setValue 50
 Setvolume: 100 100 (raw)
 Setvolume: 0 0 (-1db)
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:1:445C:453:1:C00000:0:0:0:
 getResolvedKey config.usage.remote_fallback failed !! (Typo??)
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 RemovePopup, id = ZapError
 allocate channel.. 0453:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 1944 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
 [SEC] set static current limiting
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 1
 0.0.0.0
 192.168
 nameservers: [[192, 168, 2, 1]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1], 'address': [192, 168, 2, 12]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 2, 12], 'up': True, 'mac': '00:16:b4:06:28:da', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01038f3(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 [SEC] sleep 500ms
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x1e4b968 running
 [eEPGCache] channel 0x1e4b968 running
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 1 audio stream(s) (0100), and the pcr pid is 00ff, and the text pid is 0020
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=255, apid=256
 DMX_SET_PES_FILTER(0xff) - pcr - ok
 DEMUX_START - pcr - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PAUSE - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0xff) - video - ok
 DEMUX_START - video - ok
 VIDEO_FREEZE - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x20) - ttx - ok
 DEMUX_START - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 20
 VIDEO_SLOWMOTION(0) - TuxTxt running thread...(020)
 ok
 VIDEO_FAST_FORWARD(0) - ok
 VIDEO_CONTINUE - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 [eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
 RemovePopup, id = ZapError
 use pmtpid 0060 for service_id 445c
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 AT plugin not found
 ER plugin not found
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
 decoder state: play, vpid=255, apid=256
 [SEC] set dynamic current limiting
 [Dish] tuning failed
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 [EPGC] start caching events(1422705597)
 *** Error in `/usr/bin/enigma2': double free or corruption (out): 0x74e153d8 ***
 Aborted
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
 + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 BCM accel interface not available - Operation not permitted
 + (9) GFBDC
 10800k video mem
  - double buffering available!
 3600kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 + (9) gLCDDC
 found OLED display!
 lcd buffer 0x7dc078 8448 bytes, stride 132
 LCD resolution: 132 x 64 x 8 (stride: 132)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) UHF Modulator
 couldnt open /dev/rfmod0!!!!
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "dreambox remote control (native)" is a remotecontrol
 Input device "dreambox advanced remote control (native)" is a remotecontrol
 Found 2 input devices.
 + (22) Hdmi CEC driver
 eHdmiCEC: detected physical address change: 1000 --> 3000
 eHdmiCEC: send message 84 30 00 01 
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 done, found 1 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 loaded 246 channels/transponders and 7063 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 found 1 adapter, 2 frontends(2 sim) and 7 demux, boxtype 3
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 [HardwareInfo] Scanning hardware info
 Detected: et8500 (0.91-150107-14.2)
 couldn't open /proc/stb/misc/12V_output
 [Harddisk] enumerating block devices...
 SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
 defaulting to standard display skin... skin_display.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr AVL6211, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr AVL6211, need rotorworkaround No, enabled No, DVB-S2 Yes
 slot: 0 configmode: simple
 diseqcmode:  diseqc_a_b_c_d
 slot: 1 configmode: nothing
 sec config completed
 main thread is non-idle! display spinner!
 Renumbering...
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
 Activating keymap: Default (US)
 [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
 Activating language Deutsch
 --> setting scaler_sharpness to: 0000000D
 [ePopen] command: ip -o addr show dev eth0
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 FIXME: request for unknown slot
 HDMU Center: Import evfd failed
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 Media Center: Import evfd failed
 [LCD4linux] libusb found :-) 2015-01-26-(no branch)
 getModeList for port DVI-PC
 remove DVI-PC because of not existing modes
 getModeList for port YPbPr
 getModeList for port Scart
 getModeList for port DVI
 hotplug on dvi
 setMode - port: DVI mode: 1080i rate: multi
 starting hotplug handler
 [ePopen] command: ping -c 1 www.openpli.org
 [ePopen] command: ping -c 1 www.google.nl
 [ePopen] command: ping -c 1 www.google.com
 [ePopen] command: ping -c 1 www.openpli.org
 [ePopen] command: ping -c 1 www.google.nl
 [ePopen] command: ping -c 1 www.google.com
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [EPGC] /hdd/epg.dat not found, try /epg.dat
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 [SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
 [SKIN] Parsing embedded skin <embedded-in-'Mute'>
 setValue 50
 Setvolume: 100 100 (raw)
 Setvolume: 0 0 (-1db)
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:1:445C:453:1:C00000:0:0:0:
 getResolvedKey config.usage.remote_fallback failed !! (Typo??)
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 RemovePopup, id = ZapError
 allocate channel.. 0453:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12544750 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 1944 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:1:445C:453:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 26(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 36(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 48(16)
 [SEC] set static current limiting
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 1
 0.0.0.0
 192.168
 nameservers: [[192, 168, 2, 1]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1], 'address': [192, 168, 2, 12]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 2, 12], 'up': True, 'mac': '00:16:b4:06:28:da', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 2, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 29(16)
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01038f3(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 [SEC] sleep 500ms
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x1e4bd10 running
 [eEPGCache] channel 0x1e4bd10 running
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 1 audio stream(s) (0100), and the pcr pid is 00ff, and the text pid is 0020
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=255, apid=256
 DMX_SET_PES_FILTER(0xff) - pcr - ok
 DEMUX_START - pcr - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PAUSE - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0xff) - video - ok
 DEMUX_START - video - ok
 VIDEO_FREEZE - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x20) - ttx - ok
 DEMUX_START - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 20
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 VIDEO_CONTINUE - ok
 AUDIO_CONTINUE - TuxTxt running thread...(020)
 ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 statfs failed!
 not pauseable.
 statfs failed!
 not pauseable.
 statfs failed!
 [eDVBCAService] new service 1:0:1:445C:453:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:1:445C:453:1:C00000:0:0:0:
 RemovePopup, id = ZapError
 use pmtpid 0060 for service_id 445c
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 eventNewProgramInfo 0 0
 have 1 video stream(s) (00ff), and 2 audio stream(s) (0100, 0103), and the pcr pid is 00ff, and the text pid is 0020
 decoder state: play, vpid=255, apid=256
 AT plugin not found
 ER plugin not found
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [SEC] set dynamic current limiting
 [Dish] tuning failed
 [EPGC] start caching events(1422705610)
 *** Error in `/usr/bin/enigma2': double free or corruption (out): 0x7470ea68 ***
 Aborted
 PYTHONPATH: /usr/lib/enigma2/python
 DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10
    edit: Nach frischer Install und LCDlinux nach laden der Config Standbild mit Ton nicht bedienbar.

    Auf ein neues
    Geändert von rangerm (31.01.2015 um 13:26 Uhr)
    Vu+DUO1&2,UFS922
    WaveFrontier T 90|19,2;13;28,2;23,5
    Zitieren Zitieren

  4. 01.02.2015 #4
    Joker7
    Joker7 ist offline
    VIP Avatar von Joker7
    Registriert seit
    05.05.2012
    Beiträge
    3.923
    Thanks
    779
    Thanked 1.364 Times in 938 Posts
    ...naja, ich bin ein sehr "leiser Tester"...... das war ich schon vor Monaten bei der Dream 7080HD und auch bei bei der et8500 ^^

    .. aber nur soviel von mir.....die beiden Boxen stehen hier nicht mehr ^^
    Gruss Joker7
    Ein Tag ohne lächeln ist ein verlorener Tag
    ( Charlie Chaplin )

    ------------------------------------------
    Kein Support per PN..dafür ist das Forum da.
    Zitieren Zitieren

  5. The Following User Says Thank You to Joker7 For This Useful Post:

    rangerm

  6. 02.02.2015 #5
    bonkel
    bonkel ist offline
    Boardgründer/Administrator Avatar von bonkel
    Registriert seit
    03.05.2012
    Beiträge
    8.468
    Thanks
    509
    Thanked 4.504 Times in 1.979 Posts
    teste mal das nächste image, pli hat da sehr viel angepasst...
    taste hdmi/aux
    schaltet wohl das livetv bild im display an

    Gehasst, Verdammt, Vergöttert
    Fragen gehören ins Forum nicht in meinem Postfach!
    >> Häufig gestellte Fragen <<
    Zitieren Zitieren

  7. 02.02.2015 #6
    rangerm
    rangerm ist offline
    VIP Avatar von rangerm
    Registriert seit
    05.05.2012
    Ort
    Bayern
    Beiträge
    301
    Thanks
    124
    Thanked 172 Times in 101 Posts
    Box ist schon weg, weiß nicht ob du es drüben verfolgen konntest, aber die hatte paar macken gehen von Hardware aus.

    Bin gerade am Überlegen ob ich sie austauschen lasse oder mir nee DUO2 geben lass.

    Hat mir aber gut gefallen des design. Minus Punkt war schon wieder die FB naja und die macken wo sie noch hat.
    Vu+DUO1&2,UFS922
    WaveFrontier T 90|19,2;13;28,2;23,5
    Zitieren Zitieren

  8. 02.02.2015 #7
    Joker7
    Joker7 ist offline
    VIP Avatar von Joker7
    Registriert seit
    05.05.2012
    Beiträge
    3.923
    Thanks
    779
    Thanked 1.364 Times in 938 Posts
    "Bin gerade am Überlegen ob ich sie austauschen lasse oder mir nee DUO2 geben lass."


    ..also wenn ich diese Entscheidung treffen müßte,eindeutig die Duo² ...schon lange am Markt und auch "ausgereift" ....


    Nachtrag:
    ... auch wenn das Design der ET8500 was hat..
    Geändert von Joker7 (02.02.2015 um 18:34 Uhr)
    Gruss Joker7
    Ein Tag ohne lächeln ist ein verlorener Tag
    ( Charlie Chaplin )

    ------------------------------------------
    Kein Support per PN..dafür ist das Forum da.
    Zitieren Zitieren

  9. The Following User Says Thank You to Joker7 For This Useful Post:

    rangerm

  10. 02.02.2015 #8
    rangerm
    rangerm ist offline
    VIP Avatar von rangerm
    Registriert seit
    05.05.2012
    Ort
    Bayern
    Beiträge
    301
    Thanks
    124
    Thanked 172 Times in 101 Posts
    Das design hat was aber hab auch festgestellt,um vom Sofa aus richtig was zu erkennen,ist des Display zu klein.

    Überleck mal noch bis Morgen, dann ruf ich an sie sollen mir die Duo2 schicken

    Außerdem würde ich mir so ein Design mit bisschen größeren Touchdisplay wünschen.

    Wollte sie ja als Server/mediabox einsetzen.
    Aber wenn ich eh immer aufstehen muss, um zu sehen was im Display steht kann ich mir gleich die Duo2 holen.
    Geändert von rangerm (02.02.2015 um 19:55 Uhr)
    Vu+DUO1&2,UFS922
    WaveFrontier T 90|19,2;13;28,2;23,5
    Zitieren Zitieren

  11. The Following User Says Thank You to rangerm For This Useful Post:

    Joker7

« Test:HDMU_Images_OptimussOS2plus | HDMU_13694_GBQUADPlus_OE_1927_Flash »

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  

Foren-Regeln