HDMU_236_E2_hdbox_209_git_4021

[Thomas4711]

Overclock zeigt nur error in der Uhr-

[bonkel]

Cat /proc/cpu_frequ/pll0*

[Thomas4711]

fortis:~# cat /proc/cpu_frequ/pll0*
Modul HZ = 250
CKGA_LCK = 0
CKGA_MD_STA = 3
CKGA_PLL0_CFG = 83b06
CKGA_PLL0_LCK_STA = 1
CKGA_PLL0_CLK1 = 0
CKGA_PLL0_CLK2 = 1
CKGA_PLL0_CLK3 = 0
CKGA_PLL0_CLK4 = 0
CKGA_PLL1_CFG = 94a05
CKGA_PLL1_LCK_STA = 1
CKGA_CLK_DIV = 0
CKGA_CLK_EN = 3f
CKGA_PLL1_BYPASS = 0
CKGA_CLKOUT_SEL = 0
SYSACLKOUT (standard 266MHZ) = 265MHZ
TMU0_TCOR = 10347
TMU0_TCNT = 58d
TMU1_TCOR = ffffffff
TMU1_TCNT = c24e3955

BOGOMIPS (static)= 262
BOGOMIPS (measured)= 214

PLL0     = 531 MHZ
SH4      = 265 MHZ
SH4_IC   = 132 MHZ
MODULE   = 66 MHZ
SLIM     = 265 MHZ
PLL1     = 399 MHZ
COMMS    = 99 MHZ
TMU0     = 16 MHZ
TMU1     = 16 MHZ

sh4 ratio (2,4,6,8,12,16)
sh4_ic ratio (2,4,6,8,12,16)
module ratio (4,8,12,16)
slim ratio (2,4,6,8,12,16)

[Thomas4711]

Sehr häufig nach umschalten kein Ton, das hab ich mit AAF-PLI Image schon lange nicht mehr gehabt.

[bonkel]

hast du overclock da schon angehabt?

wusste nich das die SH4 = 265 MHZ anzigen dacht da kommt 266 deswegen sagt der error

[Thomas4711]

Nein Image frisch installiert mit Maxiboot Installer.

[bonkel]

dann geh mal bitte alle durch mit test und mach dann immer den cat befehl und kopier mal alle hier rein

[Thomas4711]

fortis:~# cat /proc/cpu_frequ/pll0*
Modul HZ = 250
CKGA_LCK = 0
CKGA_MD_STA = 3
CKGA_PLL0_CFG = 86409
CKGA_PLL0_LCK_STA = 1
CKGA_PLL0_CLK1 = 0
CKGA_PLL0_CLK2 = 1
CKGA_PLL0_CLK3 = 0
CKGA_PLL0_CLK4 = 0
CKGA_PLL1_CFG = 94a05
CKGA_PLL1_LCK_STA = 1
CKGA_CLK_DIV = 0
CKGA_CLK_EN = 3f
CKGA_PLL1_BYPASS = 0
CKGA_CLKOUT_SEL = 0
SYSACLKOUT (standard 266MHZ) = 300MHZ
TMU0_TCOR = 124f8
TMU0_TCNT = 9c47
TMU1_TCOR = ffffffff
TMU1_TCNT = fb75e22f

BOGOMIPS (static)= 297
BOGOMIPS (measured)= 294

PLL0     = 600 MHZ
SH4      = 300 MHZ
SH4_IC   = 150 MHZ
MODULE   = 75 MHZ
SLIM     = 300 MHZ
PLL1     = 399 MHZ
COMMS    = 99 MHZ
TMU0     = 18 MHZ
TMU1     = 18 MHZ

sh4 ratio (2,4,6,8,12,16)
sh4_ic ratio (2,4,6,8,12,16)
module ratio (4,8,12,16)
slim ratio (2,4,6,8,12,16)

fortis:~# cat /proc/cpu_frequ/pll0*
Modul HZ = 250
CKGA_LCK = 0
CKGA_MD_STA = 3
CKGA_PLL0_CFG = 82503
CKGA_PLL0_LCK_STA = 1
CKGA_PLL0_CLK1 = 0
CKGA_PLL0_CLK2 = 1
CKGA_PLL0_CLK3 = 0
CKGA_PLL0_CLK4 = 0
CKGA_PLL1_CFG = 94a05
CKGA_PLL1_LCK_STA = 1
CKGA_CLK_DIV = 0
CKGA_CLK_EN = 3f
CKGA_PLL1_BYPASS = 0
CKGA_CLKOUT_SEL = 0
SYSACLKOUT (standard 266MHZ) = 333MHZ
TMU0_TCOR = 14532
TMU0_TCNT = 107b1
TMU1_TCOR = ffffffff
TMU1_TCNT = eb1d0933

BOGOMIPS (static)= 330
BOGOMIPS (measured)= 321

PLL0     = 666 MHZ
SH4      = 333 MHZ
SH4_IC   = 166 MHZ
MODULE   = 83 MHZ
SLIM     = 333 MHZ
PLL1     = 399 MHZ
COMMS    = 99 MHZ
TMU0     = 20 MHZ
TMU1     = 20 MHZ

sh4 ratio (2,4,6,8,12,16)
sh4_ic ratio (2,4,6,8,12,16)
module ratio (4,8,12,16)
slim ratio (2,4,6,8,12,16)

fortis:~# cat /proc/cpu_frequ/pll0*
Modul HZ = 250
CKGA_LCK = 0
CKGA_MD_STA = 3
CKGA_PLL0_CFG = 87a09
CKGA_PLL0_LCK_STA = 1
CKGA_PLL0_CLK1 = 0
CKGA_PLL0_CLK2 = 1
CKGA_PLL0_CLK3 = 0
CKGA_PLL0_CLK4 = 0
CKGA_PLL1_CFG = 94a05
CKGA_PLL1_LCK_STA = 1
CKGA_CLK_DIV = 0
CKGA_CLK_EN = 3f
CKGA_PLL1_BYPASS = 0
CKGA_CLKOUT_SEL = 0
SYSACLKOUT (standard 266MHZ) = 366MHZ
TMU0_TCOR = 1656c
TMU0_TCNT = bda
TMU1_TCOR = ffffffff
TMU1_TCNT = fd88f9ce

BOGOMIPS (static)= 363
BOGOMIPS (measured)= 343

PLL0     = 732 MHZ
SH4      = 366 MHZ
SH4_IC   = 183 MHZ
MODULE   = 91 MHZ
SLIM     = 366 MHZ
PLL1     = 399 MHZ
COMMS    = 99 MHZ
TMU0     = 22 MHZ
TMU1     = 22 MHZ

sh4 ratio (2,4,6,8,12,16)
sh4_ic ratio (2,4,6,8,12,16)
module ratio (4,8,12,16)
slim ratio (2,4,6,8,12,16)

fortis:~# cat /proc/cpu_frequ/pll0*
Modul HZ = 250
CKGA_LCK = 0
CKGA_MD_STA = 3
CKGA_PLL0_CFG = 85906
CKGA_PLL0_LCK_STA = 1
CKGA_PLL0_CLK1 = 0
CKGA_PLL0_CLK2 = 1
CKGA_PLL0_CLK3 = 0
CKGA_PLL0_CLK4 = 0
CKGA_PLL1_CFG = 94a05
CKGA_PLL1_LCK_STA = 1
CKGA_CLK_DIV = 0
CKGA_CLK_EN = 3f
CKGA_PLL1_BYPASS = 0
CKGA_CLKOUT_SEL = 0
SYSACLKOUT (standard 266MHZ) = 400MHZ
TMU0_TCOR = 1871d
TMU0_TCNT = 2fbd
TMU1_TCOR = ffffffff
TMU1_TCNT = e05ed925

BOGOMIPS (static)= 397
BOGOMIPS (measured)= 394

PLL0     = 801 MHZ
SH4      = 400 MHZ
SH4_IC   = 200 MHZ
MODULE   = 100 MHZ
SLIM     = 400 MHZ
PLL1     = 399 MHZ
COMMS    = 99 MHZ
TMU0     = 25 MHZ
TMU1     = 25 MHZ

sh4 ratio (2,4,6,8,12,16)
sh4_ic ratio (2,4,6,8,12,16)
module ratio (4,8,12,16)
slim ratio (2,4,6,8,12,16)

[bonkel]

och hoffe du machst jetzt nich für jeden wert ein post^^

[Thomas4711]

soll ich `?