Audioniek git Tvheadend

[Saentist]

one more patch

index 528c965..41539e0 100755
--- a/root/release/rcS_atevio7500
+++ b/root/release/rcS_atevio7500
@@ -81,10 +81,10 @@ echo "LOAD 7" > /dev/vfd
 
 echo "[rcS] Init embx (LOAD 6)"
 echo "LOAD 6" > /dev/vfd
-insmod $MODDIR/embxshell.ko
-insmod $MODDIR/embxmailbox.ko mailbox0=0xfe211000:136:set2 mailbox1=0xfe212000:0
-insmod $MODDIR/embxshm.ko mailbox0=shm:0:7:0x60000000:0:256:256:0:512:0x40000000:0x10000000
-insmod $MODDIR/mme_host.ko transport0=shm
+# insmod $MODDIR/embxshell.ko
+# insmod $MODDIR/embxmailbox.ko mailbox0=0xfe211000:136:set2 mailbox1=0xfe212000:0
+# insmod $MODDIR/embxshm.ko mailbox0=shm:0:7:0x60000000:0:256:256:0:512:0x40000000:0x10000000
+# insmod $MODDIR/mme_host.ko transport0=shm
 
 echo "[rcS] Init AVS (LOAD 5)"
 echo "LOAD 5" > /dev/vfd

solve problem stop loading at "LOAD 6"
also there is not needed files in

cdk/root/root_tvheadend/.hts/tvheadend

they prevent second tunner to be visible

[Saentist]

some clones for make.sh

Fortis HX-8200 HD PVR = Atevio AV 7500 HD PVR, Icecrypt STC6000 HD PVR, Miraclebox 9 HD TWIN PVR, Octagon SF-1028P Noblence, Openbox S9 HD PVR, Rebox RE-8500 HD PVR, Skyway Droid, XCruiser XDSR 600 HD
Fortis HS-9510 = Openbox S5, Octagon 1008 /1008SE, 1008SE+/, Atevio 700
Fortis HS-7810 = Openbox S6, Octagon 1008SE+
Fortis FS-9200/Fortis FS-9000 = Openbox S7/8, Octagon 1018, Atevio 7000

one more table
http://fortisclub.com/fortis-produces-model.html

[Audioniek]

Regarding the various models in make.sh, I have switched to the generic Fortis names, based on the models number stated on the mainboard in the receiver. The models listed in parentheses refer to the old and inconsistent names they were known for in the build environment. I do not to plan more, as there limited space on the screen, and the list would then be very large. People who build their own image are usually aware what generic type their receiver is.

Regarding cdk_new: that environment is currently under development and at this moment should not be used as build environment; consider it having a beta status. There are still some bugs to be ironed out and not all old features (tfinstaller for instance) are implemented yet.

To build with the old settings, you can execute ./build in cdk(_new).

Adding the tvheadend version number to the flash file name: I will look into that.

Regards,

Audioniek.