So, jetzt funktioniert HDMU wenigstens wieder. Dann kann ich ja jetzt damit weitermachen, was ich ja zuerst wollte, Image testen.
Danke erst mal soweit.
So, jetzt funktioniert HDMU wenigstens wieder. Dann kann ich ja jetzt damit weitermachen, was ich ja zuerst wollte, Image testen.
Danke erst mal soweit.
Sehr schön - also willkommen retour
Das mit dem Originalimage ist gut zu wissen - werd ich diese Tage testen
"Every Setback is a Set Up for a Comeback"
Jetzt muß ich nur noch die blöden Einträge am Anfang der bootargs raus schmeißen. Aber das STB Admin Tool hat noch einen Bug, sagst Du. Ich habe ja nach wie vor das Problem das mir das Tool auf dem USB Stecker nur 1 Partition anzeigt. sda1 493 MB vfat SWAP.
Naja - beim STB Admin Tool werden Files via FTP auf die Box gespielt,
wenn du nicht ein erweitertes Image hast ist nix mit FTP... Somit scheitern alle Tools die FTP benutzen!
"Every Setback is a Set Up for a Comeback"
Sofern ich mich richtig erinnere hast du ein Problem mit der Partitionstabelle - fdisk -l spuckt doch Fehler aus, oder?
Probier mal ein
aller betroffenen PartitionenCode:e2fsck -f /dev/sdxy
"Every Setback is a Set Up for a Comeback"
Hallo morly, mein unermüdlicher Helfer.
Ich hatte ja schon mal gelistet was fdisk -l bringt, im Rechner sind die Partitionen in Ordnung und werden richtig gelistet. (gparted)
sda1 ist Swap, FAT32, sda3 ist ist HDMU und mounted.Code:UFS910:~# fdisk -l Disk /dev/sda: 2003 MB, 2003828736 bytes 62 heads, 62 sectors/track, 1018 cylinders Units = cylinders of 3844 * 512 = 1968128 bytes Device Boot Start End Blocks Id System /dev/sda1 1 251 481280 b Win95 FAT32 Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 33, 3) Partition 1 has different physical/logical endings: phys=(60, 11, 15) logical=(250, 58, 12) Partition 1 does not end on cylinder boundary /dev/sda2 251 502 481280 83 Linux Partition 2 has different physical/logical beginnings (non-Linux?): phys=(60, 11, 16) logical=(250, 58, 13) Partition 2 has different physical/logical endings: phys=(119, 244, 61) logical=(501, 21, 22) Partition 2 does not end on cylinder boundary /dev/sda3 502 760 496640 83 Linux Partition 3 has different physical/logical beginnings (non-Linux?): phys=(119, 244, 62) logical=(501, 21, 23) Partition 3 has different physical/logical endings: phys=(181, 201, 20) logical=(759, 45, 62) Partition 3 does not end on cylinder boundary /dev/sda4 760 1019 496640 83 Linux Partition 4 has different physical/logical beginnings (non-Linux?): phys=(181, 201, 21) logical=(759, 46, 1) Partition 4 has different physical/logical endings: phys=(243, 157, 42) logical=(1018, 8, 40) Partition 4 does not end on cylinder boundary
Code:UFS910:~# e2fsck -f /dev/sda1 e2fsck 1.42.6 (21-Sep-2012) ext2fs_open2: Bad magic number in super-block e2fsck: Superblock invalid, trying backup blocks... e2fsck: Bad magic number in super-block while trying to open /dev/sda1 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> UFS910:~# e2fsck -f /dev/sda2 e2fsck 1.42.6 (21-Sep-2012) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information MINI1: 11/120360 files (0.0% non-contiguous), 17509/481280 blocks UFS910:~# e2fsck -f /dev/sda3 e2fsck 1.42.6 (21-Sep-2012) /dev/sda3 is mounted. e2fsck: Cannot continue, aborting. UFS910:~# e2fsck -f /dev/sda4 e2fsck 1.42.6 (21-Sep-2012) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity /lost+found not found. Create<y>? yes Pass 4: Checking reference counts Pass 5: Checking group summary information MINI3: ***** FILE SYSTEM WAS MODIFIED ***** MINI3: 11/124440 files (0.0% non-contiguous), 18012/496640 blocks