Kurztest HDMU_11338_E2_spark7162_211_git_5519

[Mikam_0815]

Hier meine ersten Testergebnisse des neuen image für die Triplex:

- Installation mit morly's tool wie immer ohne Probleme
- Erstassi wie immer
- Unicable setup OK
- Leichte Bildfehler in den EInstellungsmenüs
- Installation MetrixHD green + Metrix picons vom feed
- Picons jetzt wieder sichtbar im skin
- Leider immer noch keine picons im pearl display sichtbar
pearl_display.jpg
- 2 parallele Aufnahmen via timer während man einen Sender auf einem anderen transpoder aktiv hat: NOK, hier ist eine Aufnahme anschliessend 0 Byte groß

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

[TIMER] activating state 1

begin_date:  20130824 0239

service_name:  Das Erste HD

name: Nora Roberts - Mitten in der Nacht

description:  Spielfilm USA 2009 (Nora Roberts' Midnight bayou)

[TIMER] Filename calculated as: '/media/hdd/movie/20130824 0239 - Das Erste HD - Nora Roberts - Mitten in der Nacht'

recording service: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x1ed61e8> >

[add callback]

allocate channel.. 03fb:0001

available channel.. 03f3:0001

opening frontend 2

frontend successfully opened

(2)tune

[prepare] UnicableTuningWord 0x297c

[prepare] guard_offset 0

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 1 Freq 11493750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0

tuning to 1176 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:

allocate demux

query epg event id 9879

found event.. store to disc

[TIMER] prepare ok, waiting for begin

[TIMER] activating state 1

begin_date:  20130824 0239

service_name:  †RTL‡ Television

name: RTL Nachtjournal

description:  Wiederholung vom Freitag, 00:00 UhrŠModeration: Isabelle Körner / inkl. Wetter

[TIMER] Filename calculated as: '/media/hdd/movie/20130824 0239 - RTL Television - RTL Nachtjournal'

recording service: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x2280338> >

[add callback]

allocate channel.. 0441:0001

available channel.. 03f3:0001

available channel.. 03fb:0001

allocate Channel: res -6

RECORD service event 0

[TIMER] record event 3

[TIMER] 'prepare' failed: error -6

[TIMER] backoff: retry in 5 seconds

stop recording!

(was not recording)

[TIMER] record event 5

[TIMER] record event 1

[remove callback]

[TIMER] prepare failed

[TIMER] zap without asking

[TIMER] ok, zapped away

playing 1:0:1:2EE3:441:1:C00000:0:0:0:

[eDVBCAService] free slot 0 demux 0 for service 1:0:19:2B66:3F3:1:C00000:0:0:0:

[eDVBCAService] free service 1:0:19:2B66:3F3:1:C00000:0:0:0:

decoder state: play, vpid=-1, apid=-1

DEMUX_STOP - pcr - ok

DEMUX_STOP - video - ok

VIDEO_STOP - ok

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DEMUX_STOP - ttx - ok

TuxTxt stopped service 17f2

cleaning up

TuxTxt cache cleared

[eDVBLocalTimerHandler] remove channel 0x2d20b8c0

[eEPGCache] remove channel 0x2d20b8c0

[__evStart]

[__evSeekableStatusChanged]

not pauseable.

not pauseable.

not pauseable.

RemovePopup, id = ZapError

allocate channel.. 0441:0001

available channel.. 03fb:0001

(1)tune

[prepare] UnicableTuningWord 0xd3c

[prepare] guard_offset 0

RotorCmd ffffffff, lastRotorCmd ffffffff

prepare_sat System 0 Freq 12187500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0

tuning to 1076 mhz

OURSTATE: tuning

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:1:2EE3:441:1:C00000:0:0:0:

allocate demux

[SEC] invalidate current switch params

[SEC] invalidate current switch params

set sequence pos 3

[SEC] setVoltage 1

[SEC] setVoltage 2

[SEC] sleep 200ms

[SEC] setTone 0

[SEC] sleep 20ms

[SEC] sendDiseqc: e0105a0d3c(?)

[SEC] setVoltage 2

[SEC] sleep 50ms

[SEC] setTone 0

[SEC] sleep 20ms

[SEC] sendDiseqc: e0105a297c(?)

[SEC] sleep 50ms

[SEC] setVoltage 1

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 1

(1)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

[SEC] setVoltage 1

[SEC] update current switch params

[SEC] startTuneTimeout 5000

[SEC] setFrontend 1

setting frontend 2

(2)fe event: status 0, inversion off, m_tuning 1

[SEC] sleep 500ms

(2)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x2d2149c0 running

[eEPGCache] channel 0x2d2149c0 running

ok ... now we start!!

RECORD service event 5

[EPGC] next update in 42 min

[TIMER] record event 6

[eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:

[eDVBCAService] add demux 1 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:

RECORD service event 6

tuned..

[TIMER] record event 2

(1)fe event: status 1f, inversion off, m_tuning 2

OURSTATE: ok

[eDVBLocalTimerHandler] channel 0x22cb5e0 running

[eEPGCache] channel 0x22cb5e0 running

[EPGC] next update in 46 min

stop release channel timer

ok ... now we start!!

eventNewProgramInfo 0 0

have 1 video stream(s) (00a3), and 1 audio stream(s) (0068), and the pcr pid is 00a3, and the text pid is 0069

allocate demux

TuxTxt cache cleared

decoder state: play, vpid=163, apid=104

DMX_SET_PES_FILTER(0xa3) - pcr - ok

DMX_SET_PES_FILTER(0x68) - audio - ok

AUDIO_SET_BYPASS(1) - ok

AUDIO_PLAY - ok

Video Device: /dev/dvb/adapter0/video0

demux device: /dev/dvb/adapter0/demux0

VIDEO_SET_STREAMTYPE 0 - ok

DMX_SET_PES_FILTER(0xa3) - video - ok

VIDEO_PLAY - ok

DMX_SET_PES_FILTER(0x69) - ttx - ok

TuxTxt cache cleared

TuxTxt: initialized

TuxTxt service started 69

VIDEO_CONTINUE - ok

VIDEO_SLOWMOTION(0) - ok

VIDEO_FAST_FORWARD(0) - ok

AUDIO_CONTINUE - ok

disable teletext subtitles

TuxTxt running thread...(069)

[__evUpdatedInfo]

[writeChannelName]

vfd display text: RTL Television  

[showCrypted]

[showDolby]

[showMp3]

[eDVBCAService] new service 1:0:1:2EE3:441:1:C00000:0:0:0:

[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2EE3:441:1:C00000:0:0:0:

[__evUpdatedEventInfo]

[__evUpdatedEventInfo]

[__evUpdatedEventInfo]

RemovePopup, id = ZapError

PATready

use pmtpid 002c for service_id 2ee3

eventNewProgramInfo 0 0

have 1 video stream(s) (00a3), and 2 audio stream(s) (0068, 006a), and the pcr pid is 00a3, and the text pid is 0069

decoder state: play, vpid=163, apid=106

AUDIO_STOP - ok

DEMUX_STOP - audio - ok

AUDIO_CONTINUE - ok

DMX_SET_PES_FILTER(0x6a) - audio - ok

AUDIO_SET_BYPASS(0) - ok

AUDIO_PLAY - ok

AUDIO_CONTINUE - ok

[__evUpdatedInfo]

[writeChannelName]

vfd display text: RTL Television  

[showCrypted]

[showDolby]

[showMp3]

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

VIDEO_GET_EVENT - ok

unhandled DVBAPI Video Event 9

VIDEO_GET_EVENT - ok

unhandled DVBAPI Video Event 5

VIDEO_GET_EVENT - ok

[__evVideoSizeChanged]

VIDEO_GET_EVENT - ok

AITready

sdt update done!

[__evUpdatedEventInfo]

[TIMER] activating state 1

begin_date:  20130824 0239

service_name:  †RTL‡ Television

name: RTL Nachtjournal

description:  Wiederholung vom Freitag, 00:00 UhrŠModeration: Isabelle Körner / inkl. Wetter

[TIMER] Filename calculated as: '/media/hdd/movie/20130824 0239 - RTL Television - RTL Nachtjournal'

recording service: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x2280338> >

[add callback]

use cached_channel

allocate Channel: res 0

[eDVBCIInterfaces] addPMTHandler 1:0:1:2EE3:441:1:C00000:0:0:0:

ok ... now we start!!

RECORD service event 5

[TIMER] record event 6

[eDVBCAService] add demux 0 to slot 1 service 1:0:1:2EE3:441:1:C00000:0:0:0:

RECORD service event 6

tuned..

[TIMER] record event 2

query epg event id 54602

found event.. store to disc

[TIMER] prepare ok, waiting for begin

PATready

use pmtpid 002c for service_id 2ee3

RECORD service event 5

[TIMER] record event 6

[eDVBCIInterfaces] gotPMT

[eDVBCAService] don't build/send the same CA PMT twice

[eDVBLocalTimerHandler] diff is 0

[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time

[eDVBLocalTimerHandler] not changed

AITready

RECORD service event 11

[eDVBServiceRecord] now running: RTL Nachtjournal (1500 seconds)

[TIMER] record event 9

[TIMER] activating state 2

[TIMER] start recording

[TIMER] record event 0

AddPopup, id = None

Recording to /media/hdd/movie/20130824 0239 - Das Erste HD - Nora Roberts - Mitten in der Nacht.ts...

eDVBServiceRecord - Ext2/3/4 Filesystem



start recording...

RECORD: have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0

ADD PID: 0000

ADD PID: 13ed

ADD PID: 13ee

ADD PID: 13f0

setIoPrio realtime level 7 ok

[eFilePushThreadRecorder] THREAD START

[TIMER] record event 4

[TIMER] activating state 2

[TIMER] start recording

[TIMER] record event 0

AddPopup, id = None

Recording to /media/hdd/movie/20130824 0239 - RTL Television - RTL Nachtjournal.ts...

eDVBServiceRecord - Ext2/3/4 Filesystem



start recording...

RECORD: have 1 video stream(s) (00a3), and 2 audio stream(s) (0068, 006a) (006e), and the pcr pid is 00a3, and the text pid is 0069

ADD PID: 0000

ADD PID: 002c

ADD PID: 0068

ADD PID: 0069

ADD PID: 006a

ADD PID: 006e

ADD PID: 00a3

setIoPrio realtime level 7 ok

[eFilePushThreadRecorder] THREAD START

[TIMER] record event 4

Timeout!

PATready

RECORD service event 2

Timeout!

Timeout!

unimplemented: scale on non-accel surface 8->16 bpp

[eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)

[eDVBLocalTimerHandler]    getRTC returned time=0. RTC problem?

[RCU] key: 57 -> 00000000a25da857 00 PLAY SPARK(default)



CF - PLAY

****       117094 4 ****

[SEM] UP

KEY_PRESS - cf 4

++++           25 ms ++++

[RCU] key: 57 -> 00000000a25da857 01 PLAY SPARK(default)



CF - PLAY

****          106 4 ****

++++           27 ms ++++

KEY_RELEASE - cf 00 4 4 CAUSE=Timeout

----          251 ms ----

[SEM] DOWN

[Skin] Error: {MetrixHD_green/skin.xml}: color 'backtop' must be #aarrggbb or valid named color. Please contact the skin's author!

warning, skin is missing element chosenletter in <class 'Screens.MovieSelection.MovieSelection'>

warning, skin is missing element movie_sort in <class 'Screens.MovieSelection.MovieSelection'>

warning, skin is missing element movie_off in <class 'Screens.MovieSelection.MovieSelection'>

accel alloc failed



setPixmapNum(1) failed! defined pixmaps: []

setPixmapNum(1) failed! defined pixmaps: []

SCAN: the current channel's ID was not corrected - not adding channel.

ignore sdt update data.... incorrect transponder tuned!!!

loading streaminfo for /hdd/movie/20130824 0239 - Das Erste HD - Nora Roberts - Mitten in der Nacht.ts

[eMPEGStreamInformation] index 0 is past EOF

eMPEGStreamInformation::getFirstFrame - no data (yet?)

getStructureEntryFirst failed because file size is zero

read error

eMPEGStreamInformation::getLastFrame - no data (yet?)

[@ML] m_streaminfo.getLastFrame failed, fallback

loading streaminfo for /hdd/movie/20130824 0239 - RTL Television - RTL Nachtjournal.ts

loading streaminfo for /hdd/movie/20130824 0232 - RTL Television - Familien im Brennpunkt.ts

read error

[@ML] m_streaminfo.getLastFrame failed, fallback

loading streaminfo for /hdd/movie/20130824 0228 - ZDFinfo HD - Wie der Mensch die Welt eroberte.ts

read error

[@ML] m_streaminfo.getLastFrame failed, fallback

loading streaminfo for /hdd/movie/20130824 0224 - Das Erste HD - Nora Roberts - Mitten in der Nacht.ts

read error

[@ML] m_streaminfo.getLastFrame failed, fallback

loading streaminfo for /hdd/movie/20130824 0239 - Das Erste HD - Nora Roberts - Mitten in der Nacht.ts

[eMPEGStreamInformation] index 0 is past EOF

eMPEGStreamInformation::getFirstFrame - no data (yet?)

getStructureEntryFirst failed because file size is zero

read error

eMPEGStreamInformation::getLastFrame - no data (yet?)

[@ML] m_streaminfo.getLastFrame failed, fallback

accel

- Timeraufnahme während Media Center aktiv ist: Nicht OK, AUfnahme startet erst nach Beenden

Werde auf ein altes image zurückgehen da das Problem mit den 2 parallelen Aufnahmen doch stört. Ausserdem verzeifle ich langsam mit den picons im pearl, habe im skin_display.xml versucht die Position, Grösse etc. anzupassen aber we will partout die picons nicht mehr anzeigen


Nachtrag:

Hatte mir mit morly's tool ein Backup des HDMU 11199 enigma2 Git 5515 image erstellt und dieses nun wieder installiert, und wer sagt's denn: Die picons im pearl display sind wieder da

Irgend etwas ist diesbezüglich in den aktuellen spark7162 images faul den auf der ufs913 geht das display ja ohne Probleme wie Anskar verifiziert hat. Der Fehler ist wohl nach dem 11287 image reingekommen und betrifft dann wohl nicht alle Boxen.