Test der 7700 mit 215 Kernel

[Drielander]

Nachdem ich gestern wieder zweimal Hänger mit nachfolgendem dunklen Bild hatte, hat sich vorgestern und gestern Abend zusätzlich ein neues Problem eingestellt: der Topf fährt trotz Drücken auf "Abschalten" nicht mehr richtig runter, obwohl die Meldung " Receiver wird ausgeschaltet!" auf dem TV kommt. Am Topf-Display kann man auch "Shutdown .." lesen, aber er bleibt irgendwo stehen/eingeschaltet. Ich habe auch immer noch Verbindung und habe mal einen E2-log gemacht.

PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser
 + (5) Tuxtxt
 + (8) graphics acceleration manager
 STMFB accel interface available
 

 + (9) GFBDC
 15360k total video mem
 7260k usable video mem
 5640kB available for acceleration surfaces.
 resolution: 720 x 576 x 32 (stride: 2880)
 + (9) gLCDDC
 eDBoxLCD::eDBoxLCD >
 Error loading config file!
 

 LCD resolution: -1 x -1 x -1435623168 (stride: 716323808)
 + (9) Font Render Class
 + (10) gRC
 RC thread created successfully
 + (15) eWindowStyleManager
 + (20) DVB-CI UI
 + (20) RC Input layer
 + (20) misc options
 + (20) AVSwitch Driver
 couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
 + (21) input device driver
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event1
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event2
 Input device "HDMU RC TOPF" is a remotecontrol
 failed to open /dev/input/event3
 Input device "HDMU RC TOPF" is a mouse
 Found 4 input devices.
 + (22) Hdmi CEC driver
 + (30) eActionMap
 + (35) CI Slots
 scanning for common interfaces..
 CI Slot 0: reset requested
 CI Slot 1: reset requested
 CI Slot 0 setSource(0)
 CI Slot 1 setSource(0)
 eDVBCIInterfaces->setInputSource(0, 0)
 eDVBCIInterfaces->setInputSource(1, 1)
 cannot open /proc/stb/tsmux/input2
 cannot open /proc/stb/tsmux/input3
 done, found 2 common interface slots
 + (35) CA handler
 + (40) eServiceCenter
 settings instance.
 + (41) eServiceFactoryDVD
 + (41) eServiceFactoryEPlayer3
 + (41) eServiceFactoryHDMI
 + (41) eServiceFactoryM2TS
 + (41) eServiceFactoryMP3
 + (41) eServiceFactoryFS
 + (41) eServiceFactoryDVB
 + (41) Encoders
 + (41) Stream server
 [SERVERSOCKET] ERROR on bind() (Address already in use)
 reached rl 70
 ---- opening lame channel db
 reading services (version 4)
 main thread is non-idle! display spinner!
 no spinner DC!
 loaded 346 channels/transponders and 8250 services
 scanning for frontends..
 opening frontend 0
 close frontend 0
 opening frontend 1
 close frontend 1
 boxtype detection via /proc/stb/info not possible... use fallback via demux count!
 

 found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 1
 Use valid Linux Time :) (RTC?)
 [EPGC] Initialized EPGCache (wait for setCacheFile call now)
 [ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait13.png
 found 12 spinner!
 

 executing main
 setIoPrio best-effort level 3 ok
 main thread is non-idle! display spinner!
 Failed to open /dev/dbox/fp0
 Scanning hardware info
 Detected: tf7700hdpvr
 [Harddisk] enumerating block devices...
 new Harddisk sda -> /dev/sda -> /dev/sda
 [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda')
 [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda')
 Reading satellites.xml
 sec config cleared
 setSlotInfo for dvb frontend 0 to slotid 0, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 setSlotInfo for dvb frontend 1 to slotid 1, descr Conexant CX24116/CX24118, need rotorworkaround No, enabled Yes, DVB-S2 Yes
 slot: 0 configmode: equal
 slot: 1 configmode: advanced
 add 130 to 5
 add 192 to 6
 add 235 to 7
 add 282 to 8
 sec config completed
 Renumbering...
 3660kB available for acceleration surfaces.
 resolution: 1280 x 720 x 32 (stride: 5120)
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 libpng warning: iCCP: known incorrect sRGB profile
 libpng warning: iCCP: cHRM chunk does not match sRGB
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mice' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
 [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
 Selected keymap does not exist!
 Activating language Deutsch
 [ePopen] command: ip -o addr show dev eth0
 eDBoxLCD::getInstance
 LINE #  automatically   generated       by      enigma  2
 LINE 
 [AutoMount.py] self.automounts without mounts {}
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 getModeList for port Component
 getModeList for port Scart
 getModeList for port HDMI
 getModeList for port HDMI-PC
 hotplug on dvi
 setMode - port: HDMI mode: 1080i rate: 50Hz
 updateColor:  HDMI
 [eSocketMMIHandler] created successfully
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 adding Resource DiseqcTester
 resources: {'DiseqcTester': <function DiseqcTesterMain at 0x185ad84>}
 starting hotplug handler
 Starting TopfieldVFD
 [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
 [EPGC] time updated.. start EPG Mainloop
 [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
 [ePNG] couldn't open /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png
 [Skin] Error: {skin.xml}: pixmap file /usr/local/share/enigma2/HDMUSkin/extensions/hdmu_logo.png not found!. Please contact the skin's author!
 warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'>
 fp_control: SW Version 1.04
 Model: tf7700hdpvr
 vBoxType: 5
 Model not found
 [SKIN] No skin to read...
 warning, skin is missing element From in <class 'Screens.Dish.Dish'>
 warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
 warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
 warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
 libpng warning: iCCP: known incorrect sRGB profile
 warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
 RemovePopup, id = ZapError
 setValue 50
 Setvolume: 50 50 (raw)
 Setvolume: 32 32 (-1db)
 playing 1:0:19:283D:3FB:1:C00000:0:0:0:
 main thread is non-idle! display spinner!
 [EPGC] 143480 events read from /hdd/epg.dat
 [Timeshift enabled]
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 allocate channel.. 03fb:0001
 opening frontend 0
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11493000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1743 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:283D:3FB:1:C00000:0:0:0:
 allocate demux
 cidr invalid: 64
 [ePopen] command: route -n | grep  eth0
 poll: unhandled POLLERR/HUP/NVAL for fd 32(17)
 poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
 poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
 192.168
 0.0.0.0
 nameservers: [[192, 168, 178, 1], [217, 237, 150, 188], [193, 193, 158, 10]]
 read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 77]}}
 self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 178, 77], 'up': True, 'mac': '00:3e:9e:9c:c6:e7', 'dhcp': False, 'bcast': [192, 168, 178, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}}
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] started on 80
 [OpenWebif] started on 443
 poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
 set sequence pos 3
 set sequence pos 4
 [SEC] setVoltage 2
 [SEC] sleep 200ms
 [SEC] invalidate current switch params
 [SEC] sendDiseqc: e00000(DiSEqC reset)
 [SEC] sleep 50ms
 [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
 [SEC] sleep 150ms
 [SEC] sendDiseqc: e01039f5(?)
 [SEC] sleep 120ms
 [SEC] sendDiseqc: e11039f5(?)
 [SEC] sleep 50ms
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x118f700 running
 [eEPGCache] channel 0x118f700 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=5101, apid=5102
 DMX_SET_PES_FILTER(0x13ed) - pcr - ok
 DMX_SET_PES_FILTER(0x13ee) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x13ed) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x13f0) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 13f0
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 AUDIO_CHANNEL_SELECT(0) - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(13f0)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [NetworkBrowser] fallback to default translation for NetworkBrowser
 [SEC] sleep 500ms
 [NetworkBrowser] fallback to default translation for Search for network shares
 [NetworkBrowser] fallback to default translation for MountManager
 [NetworkBrowser] fallback to default translation for Manage network shares
 [EPGC] start caching events(1408863454)
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 ERROR reading PES (fd=52) - Value too large for defined data type
 use pmtpid 13ec for service_id 283d
 [Dish] tuning failed
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 eventNewProgramInfo 0 0
 dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
 Rds PID 13f4 detected ? ! ?
 have 1 video stream(s) (13ed), and 3 audio stream(s) (13ee, 13ef, 13f2), and the pcr pid is 13ed, and the text pid is 13f0
 decoder state: play, vpid=5101, apid=5102
 dvb subtitle  PID 13f1 with wrong subtitling type (24)... force 0x10!!
 Rds PID 13f4 detected ? ! ?
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 Plugin  Extensions/WebInterface failed to load: No module named plugin
 [__evUpdatedEventInfo]
 sdt update done!
 AT plugin not found
 ER plugin not found
 [OpenWebif] no plugins to load
 [OpenWebif] failed to listen on Port 80
 [OpenWebif] failed to listen on Port 443
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: Das Erste HD    
 [showCrypted]
 [showDolby]
 [showMp3]
 [EPGC] nownext finished(1408863470)
 [EPGC] schedule finished(1408863490)
 [EPGC] stop caching events(1408863490)
 [EPGC] next update in 60 min
 [__evUpdatedEventInfo]
 [eDVBLocalTimerHandler] diff is 1
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] difference between linux time and RTC time is < 60 sec... so the transponder time looks ok
 [eDVBLocalTimerHandler] time update to 09:27:36
 [eDVBLocalTimerHandler] m_time_difference is 1
 [eDVBLocalTimerHandler] set Linux Time
 [__evUpdatedEventInfo]
 playing 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:283D:3FB:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:19:283D:3FB:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 13f0
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x118f700
 [eEPGCache] remove channel 0x118f700
 allocate channel.. 03f3:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11361000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1611 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:2B66:3F3:1:C00000:0:0:0:
 allocate demux
 set sequence pos 3
 set sequence pos 3
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x118f6c0 running
 [eEPGCache] channel 0x118f6c0 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (17de), and 1 audio stream(s) (17e8), and the pcr pid is 17de, and the text pid is 17f2
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=6110, apid=6120
 DMX_SET_PES_FILTER(0x17de) - pcr - ok
 DMX_SET_PES_FILTER(0x17e8) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x17de) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x17f2) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 17f2
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(17f2)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: ZDF HD          
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 use pmtpid 17d4 for service_id 2b66
 [__evUpdatedEventInfo]
 [Dish] tuning failed
 playing 1:0:19:6F80:457:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:19:2B66:3F3:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 17f2
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x118f6c0
 [eEPGCache] remove channel 0x118f6c0
 allocate channel.. 0457:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 0 Freq 12603000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
 tuning to 2003 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:6F80:457:1:C00000:0:0:0:
 allocate demux
 poll: unhandled POLLERR/HUP/NVAL for fd 54(16)
 set sequence pos 3
 [SEC] setTone 1
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x118f6c0 running
 [eEPGCache] channel 0x118f6c0 running
 [EPGC] next update in 2 sec
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (0d49), and 1 audio stream(s) (0d4a), and the pcr pid is 0d49, and the text pid is 0edc
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=3401, apid=3402
 DMX_SET_PES_FILTER(0xd49) - pcr - ok
 DMX_SET_PES_FILTER(0xd4a) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 0 - ok
 DMX_SET_PES_FILTER(0xd49) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0xedc) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started edc
 VIDEO_CONTINUE - ok
 TuxTxt running thread...(edc)
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: WDR HD Aachen   
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:6F80:457:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:6F80:457:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 use pmtpid 15e0 for service_id 6f80
 eventNewProgramInfo 0 0
 dvb subtitle  PID 15e5 with wrong subtitling type (24)... force 0x10!!
 have 1 video stream(s) (15e1), and 3 audio stream(s) (15e2, 15e3, 15e6), and the pcr pid is 15e1, and the text pid is 15e4
 decoder state: play, vpid=5601, apid=5602
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service edc
 DMX_SET_PES_FILTER(0x15e1) - pcr - ok
 DMX_SET_PES_FILTER(0x15e2) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x15e1) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x15e4) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 15e4
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - TuxTxt running thread...(15e4)
 ok
 dvb subtitle  PID 15e5 with wrong subtitling type (24)... force 0x10!!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: WDR HD Aachen   
 [showCrypted]
 [showDolby]
 [showMp3]
 [Dish] tuning failed
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: WDR HD Aachen   
 [showCrypted]
 [showDolby]
 [showMp3]
 [EPGC] start caching events(1408866052)
 [__evUpdatedEventInfo]
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 sdt update done!
 playing 1:0:19:2840:3FB:1:C00000:0:0:0:
 [eDVBCAService] free slot 0 demux 0 for service 1:0:19:6F80:457:1:C00000:0:0:0:
 [eDVBCAService] free service 1:0:19:6F80:457:1:C00000:0:0:0:
 decoder state: play, vpid=-1, apid=-1
 DEMUX_STOP - pcr - ok
 DEMUX_STOP - video - ok
 VIDEO_STOP - ok
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DEMUX_STOP - ttx - ok
 TuxTxt stopped service 15e4
 cleaning up
 TuxTxt cache cleared
 start release channel timer
 [EPGC] nownext finished(1408866059)
 [__evStart]
 [__evSeekableStatusChanged]
 not pauseable.
 not pauseable.
 not pauseable.
 RemovePopup, id = ZapError
 [eDVBLocalTimerHandler] remove channel 0x118f6c0
 [eEPGCache] remove channel 0x118f6c0
 [EPGC] abort caching events !!
 allocate channel.. 03fb:0001
 (0)tune
 RotorCmd ffffffff, lastRotorCmd ffffffff
 prepare_sat System 1 Freq 11493000 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
 tuning to 1743 mhz
 OURSTATE: tuning
 allocate Channel: res 0
 [eDVBCIInterfaces] addPMTHandler 1:0:19:2840:3FB:1:C00000:0:0:0:
 allocate demux
 set sequence pos 3
 [SEC] setTone 0
 [SEC] sleep 10ms
 [SEC] update current switch params
 [SEC] startTuneTimeout 5000
 [SEC] setFrontend 1
 setting frontend 0
 (0)fe event: status 0, inversion off, m_tuning 1
 (0)fe event: status 1f, inversion off, m_tuning 2
 OURSTATE: ok
 [eDVBLocalTimerHandler] channel 0x2e40c718 running
 [eEPGCache] channel 0x2e40c718 running
 [EPGC] next update in 17 min
 stop release channel timer
 eventNewProgramInfo 0 0
 have 1 video stream(s) (1401), and 1 audio stream(s) (140c), and the pcr pid is 1401, and the text pid is 140e
 allocate demux
 TuxTxt cache cleared
 decoder state: play, vpid=5121, apid=5132
 DMX_SET_PES_FILTER(0x1401) - pcr - ok
 DMX_SET_PES_FILTER(0x140c) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 Video Device: /dev/dvb/adapter0/video0
 demux device: /dev/dvb/adapter0/demux0
 VIDEO_SET_STREAMTYPE 1 - ok
 DMX_SET_PES_FILTER(0x1401) - video - ok
 VIDEO_PLAY - ok
 DMX_SET_PES_FILTER(0x140e) - ttx - ok
 TuxTxt cache cleared
 TuxTxt: initialized
 TuxTxt service started 140e
 VIDEO_CONTINUE - ok
 VIDEO_SLOWMOTION(0) - ok
 VIDEO_FAST_FORWARD(0) - ok
 AUDIO_CONTINUE - ok
 disable teletext subtitles page ffffffffffffffff (und)
 TuxTxt running thread...(140e)
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SWR RP HD       
 [showCrypted]
 [showDolby]
 [showMp3]
 [eDVBCAService] new service 1:0:19:2840:3FB:1:C00000:0:0:0:
 [eDVBCAService] add demux 0 to slot 0 service 1:0:19:2840:3FB:1:C00000:0:0:0:
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]
 RemovePopup, id = ZapError
 [SEC] sleep 500ms
 [eDVBLocalTimerHandler] diff is 0
 [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
 [eDVBLocalTimerHandler] not changed
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 9
 use pmtpid 140a for service_id 2840
 eventNewProgramInfo 0 0
 dvb subtitle  PID 140f with wrong subtitling type (24)... force 0x10!!
 have 1 video stream(s) (1401), and 3 audio stream(s) (1402, 1403, 1406), and the pcr pid is 1401, and the text pid is 140e
 decoder state: play, vpid=5121, apid=5122
 AUDIO_STOP - ok
 DEMUX_STOP - audio - ok
 AUDIO_CONTINUE - ok
 DMX_SET_PES_FILTER(0x1402) - audio - ok
 AUDIO_SET_BYPASS(1) - ok
 AUDIO_PLAY - ok
 AUDIO_CONTINUE - ok
 dvb subtitle  PID 140f with wrong subtitling type (24)... force 0x10!!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SWR RP HD       
 [showCrypted]
 [showDolby]
 [showMp3]
 VIDEO_GET_EVENT - ok
 unhandled DVBAPI Video Event 5
 VIDEO_GET_EVENT - ok
 [__evVideoSizeChanged]
 VIDEO_GET_EVENT - ok
 [Dish] tuning failed
 [__evUpdatedEventInfo]
 sdt update done!
 [__evUpdatedInfo]
 [writeChannelName]
 vfd display text: SWR RP HD       
 [showCrypted]
 [showDolby]
 [showMp3]
 warning, skin is missing element FullDescription in <class 'Screens.EventView.EventViewEPGSelect'>
 warning, skin is missing element key_yellow in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element key_blue in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline2 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline0 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline3 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline1 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline4 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 warning, skin is missing element timeline5 in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
 ERROR reading PES (fd=52) - Value too large for defined data type
 warning, skin is missing element FullDescription in <class 'Screens.EventView.EventViewEPGSelect'>
 [__evUpdatedEventInfo]
 [__evUpdatedEventInfo]