The ones I tried did
The ones I tried did
Maybe my question in "No channels found on some transponders of the Astra 3" can help you .
I was not able to fix this yet and just gave it another try. I tried the manual scan with the different roll of and pilot setting combinations but nothing finds any channels. Anyone another suggestion?
First of all I Need equipment Details: Dish, numbers of LNB, HDMU Image Version, Receiver model
Knaq. thanks!
The dish was placed by a satellite company. It is 100cm high (don't know the brand) and has 2 lnb's on it. one on 19.2 (8 connectors, 6 connected) and one on 23.5 (4 connectors, connected). I just flashed The Golden Media Triplex boxes yesterday with the HDMU_15234_E2_spark7162_217_git_4182_nodebug_mix_F lash.zip image. They are connected to the 23.5 via a Spain SAR 212 F Diseqc to a Chess Edition3 Universal Quad LNB. Need any more info?
- - - Updated - - -
Previously I also tried to connect the box directly to the free port on the LNB but that also did not work. I don't think it has influence since other boxes work fine but the dish is located behind some kind of wall so it cannot be seen from outside.
And your disceq settings? Under Setting-search Channel-tuner configuation
I guess disceqc config is the problem....You can also run the disceq tester in settings
Geändert von knaq (21.07.2016 um 10:13 Uhr)
I don't think thats it. Then the scan when I connected it directly to the LNB should have worked. I also just tried a scan on the other satellite and that failed as well. Also when starting the image I let hdmu find the satellites that were connected. this is the setting it defined:
- - - Updated - - -
you are right that something is not correct though. the test gives me:
what you suggest?
- - - Updated - - -
I tried to scan the other transponders with Horizontal polarity but they are all failing. The first Vertical one I tried worked. Any idea what might cause that?