Hi Adionek,
Thank you for loader upload. Here is current status:
- loader L627 uploaded successfully
- original Openbox S6 HD firmware uploaded successfully
- tuner hangs during boot up from flash
- tuner hangs during boot up of HDMU from USB
Below are logs from putty.
Any suggestion what to do next? Is it hardware damage and I can't help with it anything else?
Loader upload
Code:% Í(Re)start USB... Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found system volume information/ 115230 openbox_s6_l627_r250200a0.ird ==> find ird openbox_s6_l627_r250200a0.ird [115230 ] <== 1 file(s), 1 dir(s) ==> usb_loading start openbox_s6_l627_r250200a0.ird reading openbox_s6_l627_r250200a0.ird ........... ret=> 115230 Loader_Parser: index(0) addr[84000000] size(181224), resize(262144) Loader_Parser: flash write etc[idx 0, addr 0, size (181224)] Loader_WriteFlash size=0x2c3e8 offset=0xa0000000 data_start 84000000 ..==> unprotect 0 .. done ==> erase firtst 0 last 1 ..==> protect 0
tuner boots up from flash
tuner boots up from pendriveCode:%rTs Ô(Re)start USB... Front USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found Rear USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found (Re)start USB... Front USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found Rear USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found stopping USB.. (Re)start USB... Front USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found Rear USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** init started: BusyBox v1.14.2 (2012-03-12 15:08:37 KST)
Code:%rTs Ô(Re)start USB... Front USB: scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found 262144000 root.img 3010445 uimage 2 file(s), 0 dir(s) reading uImage ..................................................................................................................................................................................................................................................................................................... ret=> 3010445 Wait [1] Wait [2] Wait [3] Wait [4] Wait [5] Wait [6] ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /mnt/root.img is mounted. /mnt/root.img: clean, 5651/64000 files, 108927/256000 blocks mount root INIT: version 2.88 booting init frontpanel WAIT 1 min mknod: /dev/avs: File exists mknod: /dev/fuse: File exists [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs Starting autofs [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp /var/run /var/lock. Hostname: HS7810A. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x40400000 seeking to 0 seeking to 5e00 seeking to 12460 seeking to 1ab60 seeking to 154300 seeking to 154338 seeking to 154370 seeking to 191a58 seeking to 191a60 seeking to 191a68 seeking to 191a70 seeking to 1aae40 seeking to 1aaf00 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x40000000 seeking to 0 seeking to 60980 seeking to 148478 seeking to 1484b0 seeking to 1484e8 seeking to 158858 seeking to 158864 seeking to 158880 seeking to 184d94 seeking to 186e00 init embx init AVS skip mpeg2 Model: 'hs7810a' vBoxType: 8 Input device name: "TDT RC event driver" Selected Remote: Fortis RemoteControl RemoteControl Map: MENU - 04 - 139 RED - 4B - 398 GREEN - 4A - 399 YELLOW - 49 - 400 BLUE - 48 - 401 EXIT - 1C - 174 TEXT - 0D - 388 EPG - 08 - 365 REWIND - 58 - 168 FASTFORWARD - 5C - 208 PLAY - 55 - 207 PAUSE - 07 - 119 RECORD - 56 - 167 STOP - 54 - 128 STANDBY - 0A - 116 MUTE - 0C - 113 CHANNELUP - 5E - 104 CHANNELDOWN - 5F - 109 VOLUMEUP - 4E - 115 VOLUMEDOWN - 4F - 114 INFO - 06 - 358 OK - 1F - 352 UP - 00 - 103 RIGHT - 02 - 106 DOWN - 01 - 108 LEFT - 03 - 105 BACK - 09 - 158 ZOOM - 0B - 372 VMODE - 0E - 47 RESOLUTION - 0F - 393 TVRADIO - 1A - 378 SLEEP - 1E - 142 OPEN - 40 - 361 FAV - 41 - 364 TIMER - 42 - 362 UPUP - 43 - 414 DOWNDOWN - 44 - 415 NEXT - 4C - 407 LAST - 50 - 412 PIP - 51 - 375 MEDIA - 52 - 226 LIST - 53 - 395 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 Frontpanel Map: STANDBY - 00 - 116 OK - 06 - 352 MENU - 05 - 139 VOLUMEUP - 03 - 115 VOLUMEDOWN - 04 - 114 CHANNELUP - 01 - 104 CHANNELDOWN - 02 - 109 Supports Long KeyPress: 1 processComplex > period 10, delay 120 Using period=10 delay=120 [SEM] DOWN