kannst du mal probieren die python pakete per hand zu installieren, eines ist wohl nich da, sehe grad nich welches
kannst du mal probieren die python pakete per hand zu installieren, eines ist wohl nich da, sehe grad nich welches
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Wenn Du mir mal paar Anweisungen gibst?
per telnet
opkg install python-..........
.....= das was da im bild steht, nach einander testen
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Das Ergebnis ist so:
root@formuler1:~# opkg install python-cfscrape
Unknown package 'python-cfscrape'.
Collected errors:
* opkg_solver_install: Cannot install package python-cfscrape.
root@formuler1:~#
root@formuler1:~# opkg install python-pycrypto
Unknown package 'python-pycrypto'.
Collected errors:
* opkg_solver_install: Cannot install package python-pycrypto.
dein internet geht aber schon richtig??
denn die pakete sind 1000% aufm server, hab extra nachgeschaut
Package: python-pycrypto
Version: 2.5-r3
Depends: libc6 (>= 2.24), libgmp10 (>= 6.1.1), python-core
Section: devel/python
Architecture: mips32el
Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org>
MD5Sum: 79c9bd6e46541cc8dae690dd83a4ef9f
Size: 393956
Filename: python-pycrypto_2.5-r3_mips32el.ipk
Source: http://ftp.dlitz.net/pub/dlitz/crypt...pto-2.5.tar.gz file://no-usr-include.patch
Description: A collection of cryptographic algorithms and protocols A collection of
cryptographic algorithms and protocols.
OE: python-pycrypto
License: PD & Python-2.0
Priority: optional
mal bitte die ip und gateway etc. prüfen
oder irgendwelche einstellungen von einem anderen image oder einer anderen box (sh4) übernommen?
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
python-cfscrape und python-pycrypto müssen da sein....weiß ich noch
Na, klar geht Internet!!! Sonst hätte ich ja die anderen Plugins (Fritzcall, Clever Tanken usw ) nicht ohne Probleme installieren können.dein internet geht aber schon richtig??
denn die pakete sind 1000% aufm server, hab extra nachgeschaut
Package: python-pycrypto
Version: 2.5-r3
Depends: libc6 (>= 2.24), libgmp10 (>= 6.1.1), python-core
Section: devel/python
Architecture: mips32el
Maintainer: OE-Core Developers <openembedded-core@lists.openembedded.org>
MD5Sum: 79c9bd6e46541cc8dae690dd83a4ef9f
Size: 393956
Filename: python-pycrypto_2.5-r3_mips32el.ipk
Source: http://ftp.dlitz.net/pub/dlitz/crypt...pto-2.5.tar.gz file://no-usr-include.patch
Description: A collection of cryptographic algorithms and protocols A collection of
cryptographic algorithms and protocols.
OE: python-pycrypto
License: PD & Python-2.0
Priority: optional
mal bitte die ip und gateway etc. prüfen
oder irgendwelche einstellungen von einem anderen image oder einer anderen box (sh4) übernommen?
dann kann ich mir das nicht erklären, ich hab mir die liste ja grad gesehen ...alles da was gebraucht wird
opkg update höchstens
und opkg list
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Nützt das was ?
- - - Aktualisiert - - -Code:hdmu 4 formuler1 formuler1 login: root Password: HDMU 16138 Git 2727 # # ###### # # # # # # # # ## ## # # # # # # # # # # # # ####### # # # # # # # # # # # # # # # # # # # # # # # # # ###### # # ##### +++++++++++++++++: System Data :+++++++++++++++++++ + Box = formuler1 + HDMU Rev = 16138 + GIT Rev = 2727 + Hostname = formuler1 + Kernel = 4.7.6 + Uptime = 13:43:17 up 28 min, load average: 0.17, 0.14, 0.09 + CPU = Broadcom BMIPS5000 V1.1 FPU V0.1 +Memory Total = 322160 kB + Memory Free = 224452 kB root@formuler1:~# killall rcS killall: rcS: no process killed root@formuler1:~# killall enigma2 root@formuler1:~# enigma2 PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 10 ENIGMA2_DEBUG settings: Level=3 [MAIN] executing main [HardwareInfo] Scanning hardware info Detected: formuler1 (1-2) < 1767.780> [Harddisk] enumerating block devices... < 1767.791> [Harddisk] new device sda -> /dev/sda -> /dev/sda < 1767.792> [ePopen] command: ('sdparm', 'sdparm', '--set=SCT=0', '/dev/sda') < 1767.797> [ePopen] command: ('sdparm', 'sdparm', '-C stop', '/dev/sda') < 1767.913> [SKIN ERROR] error in /usr/share/enigma2/ < 1768.964> [SecConfigure] sec config cleared < 1768.966> [SecConfigure] slot: 0 configmode: simple < 1768.967> [SecConfigure] diseqcmode: single < 1768.968> [SecConfigure] slot: 1 configmode: simple < 1768.969> [SecConfigure] diseqcmode: single < 1768.970> [SecConfigure] sec config completed < 1769.462> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB < 1773.701> Unknown device type: front panel < 1773.709> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Er rno 25] Inappropriate ioctl for device > < 1773.768> Activating keymap: Default (US) < 1773.769> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap < 1773.771> Activating language Deutsch < 1774.310> --> setting scaler_sharpness to: 0000000D < 1774.644> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml no t found < 1774.649> [ePopen] command: ip -o addr show dev eth0 < 1774.858> HDMU Center: Import evfd failed < 1775.066> [PiconManager] set language to de < 1775.797> [PiconManager] set language to de < 1778.634> getFPVersion failed! < 1778.639> [OpenWebif] -D- tuner '0' 'BCM7346 (internal)' 'Tuner A' < 1778.640> [OpenWebif] -D- tuner '1' 'BCM7346 (internal)' 'Tuner B' < 1778.676> Plugin Extensions/WebInterface failed to load: No module named plu gin < 1779.247> Media Center: Import evfd failed < 1779.573> [VideoHardware] getModeList for port DVI-PC < 1779.574> [VideoHardware] remove DVI-PC because of not existing modes < 1779.574> [VideoHardware] getModeList for port Scart < 1779.576> [VideoHardware] getModeList for port YPbPr < 1779.579> [VideoHardware] getModeList for port Scart < 1779.582> [VideoHardware] getModeList for port DVI < 1779.587> [VideoHardware] hotplug on dvi < 1779.601> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi < 1779.746> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment... < 1779.747> [AutomaticVolumeAdjustmentConfig] Loading config file... < 1779.750> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file ... < 1779.750> [AutomaticVolumeAdjustment] initialize config values... < 1779.759> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'> < 1782.392> Cant get weather data: timeout('timed out',) < 1783.398> [SKIN] Parsing embedded skin <embedded-in-'HideVBILine'> < 1783.583> warning, skin is missing element From in <class 'Screens.Dish.Dish' > < 1783.584> warning, skin is missing element Goto in <class 'Screens.Dish.Dish' > < 1783.585> warning, skin is missing element tunerName in <class 'Screens.Dish. Dish'> < 1783.586> warning, skin is missing element turnSpeed in <class 'Screens.Dish. Dish'> < 1783.587> warning, skin is missing element posGoto in <class 'Screens.Dish.Di sh'> < 1783.588> warning, skin is missing element posFrom in <class 'Screens.Dish.Di sh'> libpng warning: iCCP: known incorrect sRGB profile < 1783.591> warning, skin is missing element turnTime in <class 'Screens.Dish.D ish'> < 1783.652> RemovePopup, id = ZapError < 1785.931> Cant get weather data: timeout('timed out',) < 1786.030> [Skin] Error: {skin.xml}: color 'grey1' must be #aarrggbb or valid named color. Please contact the skin's author! < 1786.120> [SKIN] Parsing embedded skin <embedded-in-'Mute'> < 1786.127> setValue 50 < 1786.167> playing 1:0:19:2870:425:1:C00000:0:0:0: < 1786.193> getResolvedKey config.usage.remote_fallback failed !! (Typo??) < 1786.278> not pauseable. < 1786.280> not pauseable. < 1786.282> not pauseable. < 1786.285> RemovePopup, id = ZapError < 1786.285> [eDVBFrontend] opening /dev/dvb/adapter0/frontend0 failed: Device o r resource busy < 1786.299> RemovePopup, id = ZapError < 1786.299> AddPopup, id = ZapError < 1786.348> warning, skin is missing element WarningPixmap in <class 'Screens.M essageBox.MessageBox'>(Kanal nicht verfügbar! Bitte Tuner-Konfiguration überprüfen!)< 1786.348> libpng warning: iCCP: known incorrect sRGB profile < 1786.452> [ePopen] command: route -n | grep eth0 < 1786.482> 0.0.0.0 < 1786.483> 192.168 < 1786.502> nameservers: [[192, 168, 178, 1]] < 1786.502> read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1], 'address': [192, 168, 178, 31]}} < 1786.503> self.ifaces after loading: {'eth0': {'preup': False, 'predown': Fal se, 'ip': [192, 168, 178, 31], 'up': True, 'mac': '0c:8c:8f:00:10:77', 'dhcp': F alse, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 178, 1]}} < 1786.512> AT plugin not found < 1786.513> SerienRecorder plugin not found < 1786.514> ER plugin not found < 1786.523> [OpenWebif] no plugins to load < 1786.532> [OpenWebif] failed to listen on Port 80
Ach ja, ich habe die Image nach dem Problem mit HDMU_16165_FormulerF1_OE_2745_Flash
neu geflascht und alles nochmal neu eingegeben. Ist immer noch das gleiche. FritzCall (zeigt super Verbindung, ist ja LAN) usw. geht alles super und MediaPortal macht die gleichen Probleme.
Gibt es eine Image wo es gehen könnte? Muss ja nicht die Neuste sein.
- - - Aktualisiert - - -
Ja und bei der opennfr Image geht auch alles. Sch.. Ich möchte aber die HDMU Image da mir diese besser zusagt.
Beitrag editiert...
...bitte solche Ausgaben in einer Codebox posten.
Gruß
flac
-------------------------------------------------- Kein Support via PN --------------------------------------------------
RECEIVER>GB UHD Quad 4K mit akt. HDMU Image, Octagon 4K SF 4008, Wetekplay, Kathrein UFS913, GI Xpeed LX2
TV>LG47LV570S / AVR>DENON 2309 / DVD>DENON 1930 / BLURAY>DENON 1800BD / iPOD DOCK.>DENON ASD-3N /
TAPE>AKAI GX-650D / PHONO>THORENS TD125 / HECO 7.1 SYSTEM / FB>HARMONY ELITE / FRITZBOX 7590 / NAS>ZyXEL NSA325/325v2