HDMU 15671_4602 USF913 , keine Plugin anzeige, der Rest geht ,.
warum nimmt man nicht einen defekten build aus dem Download ?
Gruß
Krabbler
HDMU 15671_4602 USF913 , keine Plugin anzeige, der Rest geht ,.
warum nimmt man nicht einen defekten build aus dem Download ?
Gruß
Krabbler
Weil man Plugins über anderen Wege laden kann. Und wenn ich jetzt defekte lösche hat kein Image auf dem Server wäre
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Hallo,
es treten die selben Fehler und Funktionen auf, wie beim 15672 (Fernbedienung, Tuner, Plugins, Aufnahmen, mp3).
Mehr habe ich erstmal nicht getestet
Code:ToFiÿ <<< Loader L23231>>> “ToFi"Z¿Š¿Z[!p Board: TF7700 [29-bit mode] U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043 DRAM: 128 MiB NOR: 8 MiB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1 0 (Re)start USB... USB: scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** ## Booting image at 85000000 ... Bad Magic Number ## Booting image at 80060000 ... Image Name: Linux-2.6.32.71_stm24_0217 Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1789348 Bytes = 1.7 MiB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ... INIT: version 2.88 booting init frontpanel fsck.jfs version 1.1.15, 04-Mar-2011 processing started: 12/8/2016 20:58:09 The current device is: /dev/sda3 The superblock does not describe a correct jfs file system. If device /dev/sda3 is valid and contains a jfs file system, then both the primary and secondary superblocks are corrupt and cannot be repaired, and fsck cannot continue. Otherwise, make sure the entered device /dev/sda3 is correct. [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs Starting autofs [mountall] Mounting local filesystems... Cleaning /tmp. Hostname: TOPF. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x10400000 seeking to 0 seeking to 5f00 seeking to 12320 seeking to 1aa20 seeking to 173100 seeking to 173138 seeking to 173170 seeking to 1b9058 seeking to 1b9060 seeking to 1b9068 seeking to 1b9070 seeking to 1d0920 seeking to 1d0a00 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x10000000 seeking to 0 seeking to 1277c0 seeking to 1277f8 seeking to 127830 seeking to 14d558 seeking to 14d564 seeking to 14d570 seeking to 17df30 seeking to 180000 init embx init AVS insmod: /lib/modules/smartcard.ko: module not found [mountall] Mounting local filesystems... Model: 'tf7700hdpvr' vBoxType: 5 Input device name: "TDT RC event driver" Selected Remote: Tf7700 RemoteControl RemoteControl Map: STANDBY - 0A - 116 MUTE - 0C - 113 ZOOM - 42 - 372 VMODE - 43 - 47 AUDIO - 08 - 392 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 BACK - 1E - 158 INFO - 1D - 358 SEARCH - 05 - 217 SUBTITLE - 07 - 370 TEXT - 47 - 388 DOWN/P- - 01 - 108 UP/P+ - 00 - 103 RIGHT/V+ - 02 - 106 LEFT/V- - 03 - 105 OK/LIST - 1F - 352 MENU - 1A - 139 GUIDE - 1B - 365 EXIT - 1C - 102 FAV - 09 - 364 RED - 4D - 398 GREEN - 0D - 399 YELLOW - 0E - 400 BLUE - 0F - 401 REWIND - 45 - 168 PAUSE - 06 - 119 PLAY - 46 - 207 FASTFORWARD - 48 - 208 RECORD - 4B - 167 STOP - 4A - 128 SLOWMOTION - 49 - 409 RECORDLIST - 51 - 395 SAT - 5E - 381 STEPBACK - 50 - 412 STEPFORWARD - 52 - 407 BOOKMARKS - 4C - 156 TV/RADIO - 04 - 378 MEDIA - 40 - 226 TIMER - 44 - 362 Frontpanel Map: CHANNELDOWN - 02 - 109 CHANNELUP - 03 - 104 VOLUMEDOWN - 01 - 114 showSinglePic /boot/bootlogo.mvi VOLUMEUP - 06 - 115 STANDBY - 0C - 116 Supports Long KeyPress: 1 processComplex > period 110, delay 10 Using period=110 delay=10 [SEM] DOWN VIDEO_SELECT_SOURCE MEMORY (Success) VIDEO_PLAY (Success) VIDEO_CONTINUE: (Success) VIDEO_CLEAR_BUFFER: (Invalid argument) Deconfiguring network interfaces... done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... done. [set_was_timer_wakeup] no timer aktiv starting e2-> Simple mixer control 'HDMI',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -31 - 31 Simple mixer control 'Analog',0 Mono: Playback 6 [60%] [on] Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -31 - 31 Mono: Playback 6 [60%] [on] Simple mixer control 'SPDIF',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -31 - 31 Mono: Playback 6 [60%] [on] (enigma2:2301): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though. PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA2_DEBUG settings: Level=3 [MAIN] executing main libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB Model not found libpng warning: iCCP: known incorrect sRGB profile ********** end showiframe VIDEO_SELECT_SOURCE DEMUX (Invalid argument) killall: showiframe: no process killed libpng warning: iCCP: known incorrect sRGB profile
Hier treten ebenso dieselben Fehler und Funktionen auf, wie zuletzt (Fernbedienung, Tuner, Plugins, Aufnahmen, mp3).
Beim Spark 7162 (15682) funktioniert der Tuner, aber es hängt bei der mp3 Wiedergabe.
Das Log geht bis zum Abspielversuch einer Aufnahme:
Code:ToFiÿ <<< Loader L23231>>> “ToFi"Z¿Š¿Z[!p Board: TF7700 [29-bit mode] U-Boot 1.3.1-gfeb9b4b7-dirty (Oct 23 2011 - 12:43:54) - stm23_0043 DRAM: 128 MiB NOR: 8 MiB In: serial Out: serial Err: serial Hit any key to stop autoboot: 1 0 (Re)start USB... USB: scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Can't read from device 0 ** ** Unable to use usb 0:1 for fatload ** ## Booting image at 85000000 ... Bad Magic Number ## Booting image at 80060000 ... Image Name: Linux-2.6.32.71_stm24_0217 Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1789347 Bytes = 1.7 MiB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:::255.255.255.0:tf7700:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:3e:9e:53:7d:9e - 0x00000000 - 0 ... INIT: version 2.88 booting init frontpanel fsck.jfs version 1.1.15, 04-Mar-2011 processing started: 12/9/2016 17:34:17 The current device is: /dev/sda3 The superblock does not describe a correct jfs file system. If device /dev/sda3 is valid and contains a jfs file system, then both the primary and secondary superblocks are corrupt and cannot be repaired, and fsck cannot continue. Otherwise, make sure the entered device /dev/sda3 is correct. [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs Starting autofs [mountall] Mounting local filesystems... Cleaning /tmp. Hostname: TOPF. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x10400000 seeking to 0 seeking to 5f00 seeking to 12320 seeking to 1aa20 seeking to 173100 seeking to 173138 seeking to 173170 seeking to 1b9058 seeking to 1b9060 seeking to 1b9068 seeking to 1b9070 seeking to 1d0920 seeking to 1d0a00 copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x10000000 seeking to 0 seeking to 1277c0 seeking to 1277f8 seeking to 127830 seeking to 14d558 seeking to 14d564 seeking to 14d570 seeking to 17df30 seeking to 180000 init embx init AVS insmod: /lib/modules/smartcard.ko: module not found showSinglePic /boot/bootlogo.mvi Model: 'tf7700hdpvr' vBoxType: 5 Input device name: "TDT RC event driver" Selected Remote: Tf7700 RemoteControl RemoteControl Map: STANDBY - 0A - 116 MUTE - 0C - 113 ZOOM - 42 - 372 VMODE - 43 - 47 AUDIO - 08 - 392 0BUTTON - 10 - 11 1BUTTON - 11 - 2 2BUTTON - 12 - 3 3BUTTON - 13 - 4 4BUTTON - 14 - 5 5BUTTON - 15 - 6 6BUTTON - 16 - 7 7BUTTON - 17 - 8 8BUTTON - 18 - 9 9BUTTON - 19 - 10 BACK - 1E - 158 INFO - 1D - 358 SEARCH - 05 - 217 SUBTITLE - 07 - 370 TEXT - 47 - 388 DOWN/P- - 01 - 108 UP/P+ - 00 - 103 RIGHT/V+ - 02 - 106 LEFT/V- - 03 - 105 OK/LIST - 1F - 352 MENU - 1A - 139 GUIDE - 1B - 365 EXIT - 1C - 102 FAV - 09 - 364 RED - 4D - 398 GREEN - 0D - 399 YELLOW - 0E - 400 BLUE - 0F - 401 REWIND - 45 - 168 PAUSE - 06 - 119 PLAY - 46 - 207 FASTFORWARD - 48 - 208 RECORD - 4B - 167 STOP - 4A - 128 SLOWMOTION - 49 - 409 RECORDLIST - 51 - 395 SAT - 5E - 381 VIDEO_SELECT_SOURCE MEMORY (Success) VIDEO_PLAY (Success) VIDEO_CONTINUE: (Success) VIDEO_CLEAR_BUFFER: (Invalid argument) [mountall] Mounting local filesystems... STEPBACK - 50 - 412 STEPFORWARD - 52 - 407 BOOKMARKS - 4C - 156 TV/RADIO - 04 - 378 MEDIA - 40 - 226 TIMER - 44 - 362 Frontpanel Map: CHANNELDOWN - 02 - 109 CHANNELUP - 03 - 104 VOLUMEDOWN - 01 - 114 VOLUMEUP - 06 - 115 STANDBY - 0C - 116 Supports Long KeyPress: 1 processComplex > period 110, delay 10 Using period=110 delay=10 [SEM] DOWN Deconfiguring network interfaces... done. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... done. [set_was_timer_wakeup] no timer aktiv starting e2-> Simple mixer control 'Analog',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -31 - 31 Mono: Playback 6 [60%] [on] Simple mixer control 'HDMI',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -31 - 31 Mono: Playback 6 [60%] [on] Simple mixer control 'SPDIF',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -31 - 31 Mono: Playback 6 [60%] [on] (enigma2:2300): GStreamer-WARNING **: External plugin loader failed. This most likely means that the plugin loader helper binary was not found or could not be run. You might need to set the GST_PLUGIN_SCANNER environment variable if your setup is unusual. This should normally not be required though. PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA2_DEBUG settings: Level=3 [MAIN] executing main libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB libpng warning: iCCP: known incorrect sRGB profile libpng warning: iCCP: cHRM chunk does not match sRGB Model not found libpng warning: iCCP: known incorrect sRGB profile ********** end showiframe VIDEO_SELECT_SOURCE DEMUX (Invalid argument) libpng warning: iCCP: known incorrect sRGB profile KEY by code: 80 - STOP **** 88144 1 **** [SEM] UP KEY_PRESS - 80 1 ++++ 3 ms ++++ KEY by code: 80 - STOP **** 31 1 **** ++++ 89 ms ++++ KEY_RELEASE - 80 00 1 1 CAUSE=Timeout ---- 122 ms ---- [SEM] DOWN KEY by code: 160 - OK/LIST **** 11799 2 **** [SEM] UP KEY_PRESS - 160 2 ++++ 0 ms ++++ KEY_RELEASE - 160 00 2 2 CAUSE=Timeout ---- 123 ms ---- [SEM] DOWN Model not found TuxTxt cache cleared TuxTxt cache cleared TuxTxt: initialized TuxTxt service started 21 TuxTxt running thread...(021) < 119.525> [eDVBPESReader] Created. Opening demux < 119.529> [eDVBPESReader] Created. Opening demux TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror libpng warning: iCCP: known incorrect sRGB profile TuxTxt: readerror < 124.161> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror < 125.239> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type TuxTxt: readerror TuxTxt: readerror < 125.710> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type TuxTxt: readerror < 126.060> [eDVBPESReader] ERROR reading PES (fd=37): Value too large for defined data type TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror TuxTxt: readerror
Kannst du mal testweise alle Kabel ab machen. Also sat und oder Kabel. Und dann Box ein schalten und mp3 testen
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Da du von Sat und/oder Kabel schriebst, gehe ich davon aus, dass du einen Test bei dem Spark 7162 meintest. Ohne Sat-Kabel ging die mp3-Wiedergabe von mehreren Titeln. Allerdings kam es beim Drücken von Exit zum crash.Ich konnte es später allerdings nicht mehr nachstellen. Da lief es dann ganz ohne Probleme (Abspielen; Player beenden; Abspielen; Beenden;...).Im Log ist die Rede von "Premature end of JPEG file". Ich weiß allerdings nicht, ob das relevant ist.Ich hänge mal beide an.
Genau meinte die spark ist ja witzig Daa ohne tuner Signal mp3 geht
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
wobei ein 217er image nicht so toll für die töpfe, würde da eher 209er bauen lassen.
Ohne patch kann es am sata port zu korrupten Dateien kommen.
Kann in dem Fall auch wo anders dran liegen. Aber ohne sata path haben viele Töpfe so ihre Probleme. Den sata patch gibt es nur bis kernel 209.
04-Dec-2016 13:04 hab ich ein 209er gebaut...scheint nich als würde das dass prob lösen
Gehasst, Verdammt, Vergöttert
Fragen gehören ins Forum nicht in meinem Postfach!
>> Häufig gestellte Fragen <<
Hallo,
ah jetzt verstehe ich wieso die Plugins nicht laufen, wo kann man die denn runterladen und dann installieren. War lange nicht mehr mit HDMU beschäftigt, da ich das meiste über die Dreamboxen mache.
Gruß
Sathep