A few years ago I used a usb flash drive for a very short time, but then switched to NFS. For the last two years, I boot from and run all my images from an NFS server. It is faster and much, much easier (especially for development.) And if you use scripts, you not only do you not have to flash your box, you don't even have to change the flash env once you make the initial changes. I can post details if anyone is interested.On my box there is a tool for this, TGZ-USB-Installer by Eisha
Automatically format USB drive extract TGZ image for usb and set boot arguments
is there a way for extra option for kernel logging in make.sh for testers
Boot arguments to boot from USB drive for ST7105 and ST7111.
USE ON OWN RISK
Back to the topic...
Does anyone have Tvheadend working with the hardware descramblers (instead of the built in software descramblers ffdecsa/libdvbcsa )? With the software descramblers, you run out of CPU power very quickly when streaming/recording multiple encrypted channels. And I tested a long time ago with my extended_cw mods to Tvheadend and it worked ok for 1 or 2 SD extended_cw channels, but cannot handle HD channels. But now that I have the HW DES enabled drivers, I was thinking to try and use them with Tvheadend...
Share more info about NFS.
Hi,
hat das schon wer auf ner AT7500 ans laufen bekommen ?
TVH rennt ... nur finde keine Sender... egal was ich mache.
Gruß
Do you have diseqc switch?
Hi
No diseq.
Only Astra at my test ports.
Is some one have solution how to use CI slot(s)?
Patch to build latest versions of TVH.Code:ddiff --git a/make/tvheadend.mk b/make/tvheadend.mkindex c08b88e..6726c46 100644 --- a/make/tvheadend.mk +++ b/make/tvheadend.mk @@ -55,6 +55,7 @@ $(D)/tvheadend.config.status: --disable-libfdkaac-static \ --disable-uriparser \ --disable-dvben50221 \ + --disable-pcre \ --disable-dbus_1 \ --with-boxtype=$(BOXTYPE) \ PKG_CONFIG=$(hostprefix)/bin/$(target)-pkg-config \
Is any one can post patch to make CI slots (en50221) to work with TVH?
Geändert von Saentist (21.08.2017 um 07:36 Uhr)
As of yesterday, the build-system git should also be capable of building Tvheadend. I have introduced a diff-scheme similar to the one in use for OpenPLi.
The patches in the diffs provided in the git also permit #if defined(BOX_NAME) / #endif constructions in code with BOX_NAME the name internally used in the buildsytem, like fortis_hdbox, atevio7500, and so on, but written in uppercase.
Unfortunately I do not know how to use the CI-slots in Tvheadend, However, the necessary drivers are built and loaded in the rcS-routines provided.
Regards,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
There are no device mapped,
in enigma/neutrino they are mapped.
if this will helpCode:/dev/dvb/adapter0/ci0 /dev/dvb/adapter0/ci1
https://github.com/libo/Enigma2/tree/master/lib/dvb_ci
maby there is newer versions