Hallo Flac
Die Festplatten sind beide WestenDigital WD20EARX 2TB und 64MB cache oder WD1600AAJS worauf vorher Don't cry und HDMU 13065 und 16614 liefen. Trotzdem habe ich die Festplatten mit W10 via diskmgmt.msc auf efat32 formattiert und auf dem PC getestet. Wieder aufs neue die HDMU images versucht zu installieren. Bei jeder Image Versuch wurde der Stick aufs neue formattiert und mit nur ein Image daruaf, immer mit den Einstellungen Partition und jfs auf 1 und die andere Einstellungen auf 0, wobei 17212 wieder stecken blieb nach reboot->l232->Linux und in das error log bei init embx.:
Code:HDMU image 17311 part of error log after reboot 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found reading uImage ** Unable to read "uImage" from usb 0:1 ** ## Booting image at 85000000 ... Bad Magic Number ## Booting image at 80060000 ... Image Name: Linux-2.6.32.71_stm24_0217 Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1961528 Bytes = 1.9 MiB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:192.168.178.10:192.168.178.10:255.255.255.0:tf7700:eth0:off nwhwconf=device:eth0,hwaddr:00:3e:9e:11:22:33 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 - 0x00000000 - 0 ... INIT: version 2.88 booting init frontpanel skip fsck.jfs version 1.1.15, 04-Mar-2011 processing started: 2/4/2018 10:56:19 Error: Cannot open device /dev/sda3 Usage: fsck.jfs [-afnpvV] [-j journal_device] [--omit_journal_replay] [--replay_journal_only] device --omit_journal_replay Omit transaction log replay. --replay_journal_only Only replay the transaction log. [mountvirtfs] Seems to be the first run - Making devices in /dev... [makedev] Starting makedev... CI-slot(s) : Yes Tuners: 2 HDMI CEC : No [makedev] done. [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev Starting portmap daemon.... Loading autofs Starting autofs [mountall] Mounting local filesystems... Cleaning /tmp /var/run /var/lock. Hostname: TOPF. init stmfb LOADING MODULES load firmware copLoadFile (file /boot/audio.elf) error ReadBytes copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x10000000 init embx
Nachdem habe ich 17313 versucht und lässt sich installieren, jedoch scheint nicht komplett zu sein. Wenn ich z.B plug ins wie Pli HD Skin herunterlade, wird die Installation bestätigt, jedoch es gibt kein Skinselector. Auch wenn ich ein Bootlogo herunterlade ist das Bild beim booten da, jedoch der Topf bleibt in einder Bootschleife hängen und ist beschädigt. Ich muss alles wieder aufs neue installieren.
Überraschend ist das 16614 sich wieder installieren lässt und offenbar gut läuft.
Zusammgefasst habe ich nun die folgende Resultate:
AAF Don't cry läuft
HDMU 13065 hat pilot/navi Probleme. Wir müssen für jede Transponder navi umstellen von Auto auf On, jedoch beim längeren Abschalten in Stand by geht diese Umstellung wider verloren
HDMU 16614 trotzdem muss ich die navi Einstellungen umstellen, aber diese bleiben jedenfalss stehen. Weiter läuft dieses Image an sich sehr gut. Jedoch bei HDMU center -> System Infos stürtzt der Topf ab und muss völlig abgeschaltet und neu gestartet werden
HDMU 17209-17212-17311 Installation gelingt nicht. Der Topf bleibt hängen nach reboot -> L232 -> Lunix
HDMU 17313 läuft aber nicht komplett?
Nach nahezu eien Woche mit HDMU gespielt zu haben bin ich nun froh das jedenfalls HDMU 16614 wieder läuft
Viele Dank ,
Henk
- - - Aktualisiert - - -
Hallo Audioniek,
thanks for your reply. I understand now that it has something to do with frontpanel driver. However it seems to have no influence on the fact that the booting is hanging, because also with the images, which are running, the same error is there. As can been seen from my reply to flac (in german) at least I succeeded to get HDMU 16614 working an I am already happy with that.
Thank youn anyway
Henk