I build it with Linuxmint 19 32 Bit, and it works. Let it me know, if 64 Bit will work Thanks ! Clausi_e
I build it with Linuxmint 19 32 Bit, and it works. Let it me know, if 64 Bit will work Thanks ! Clausi_e
hs7429
***********
neutrino 3.9.0 = ok
scrolling front panel = didnt work
@sadaghiani
Has been fixed. Do a git pull and rebuild.
Regards,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
Start build of driver.
make -j3 -C /home/amir/buildsystem/build_tmp/linux-sh4-2.6.32.71_stm24_0217 ARCH=sh CONFIG_DEBUG_SECTION_MISMATCH=y \
CONFIG_MODULES_PATH=/home/amir/buildsystem/tufsbox/cross/target \
KERNEL_LOCATION=/home/amir/buildsystem/build_tmp/linux-sh4-2.6.32.71_stm24_0217 \
DRIVER_TOPDIR=/home/amir/buildsystem/driver \
M=/home/amir/buildsystem/driver \
WLANDRIVER=wlandriver HS7429=hs7429 \
CROSS_COMPILE=sh4-linux- \
modules
CC [M] /home/amir/buildsystem/driver/pti/pti_main.o
CC [M] /home/amir/buildsystem/driver/smartcard/sci_drv.o
CC [M] /home/amir/buildsystem/driver/smartcard/sci_params.o
CC [M] /home/amir/buildsystem/driver/smartcard/atr.o
/home/amir/buildsystem/driver/pti/pti_main.c:940 warning: 'enum ca_descr_algo' declared inside parameter list [enabled by default]
enum ca_descr_algo algo )
^
/home/amir/buildsystem/driver/pti/pti_main.c:940 warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
/home/amir/buildsystem/driver/pti/pti_main.c:940:22: error: parameter 3 ('algo') has incomplete type
enum ca_descr_algo algo )
^
/home/amir/buildsystem/driver/pti/pti_main.c:939:5: warning: function declaration isn't a prototype [-Wstrict-prototypes]
int pti_hal_descrambler_set_mode ( int session_handle, int descrambler_handle,
^
make[3]: *** [scripts/Makefile.build:230: /home/amir/buildsystem/driver/pti/pti_main.o] Error 1
make[2]: *** [scripts/Makefile.build:365: /home/amir/buildsystem/driver/pti] Error 2
make[2]: *** Waiting for unfinished jobs....
LD [M] /home/amir/buildsystem/driver/smartcard/smartcard.o
make[1]: *** [Makefile:1429: _module_/home/amir/buildsystem/driver] Error 2
make: *** [make/driver.mk /home/amir/buildsystem/.deps/driver] Error 2
I forgot to conditionalize some Power VU DES stuff in pti. Do a git pull in driver and it should build again.
Regards,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
Hi!
E2 UFS910 usb build error?:
Code:Start build of enigma2_openwebif. Applying Patch: build-enigma2/enigma2-openwebif.patch patching file plugin/controllers/models/info.py patching file plugin/controllers/models/owibranding.py Hunk #2 FAILED at 182. Hunk #3 succeeded at 307 (offset 3 lines). Hunk #4 succeeded at 402 (offset 3 lines). Hunk #5 succeeded at 594 (offset 5 lines). 1 out of 5 hunks FAILED -- saving rejects to file plugin/controllers/models/owibranding.py.rej make: *** [make/enigma2-plugins.mk:131: /home/turulbird/sh4-build_Audioniek/buildsystem/.deps/enigma2_openwebif] Error 1
New 2022 UFS 910 neutrino usb image in my homepage!
Geändert von turulbird (24.02.2022 um 18:57 Uhr)
Thanks webif update!
Build ok, no error.
But E2 usb nothing run:
Code:INIT: version booting [rcS] Start Kathrein UFS910 Enigma2 [rcS] Init frontpanel [rcS] Wait 1 minute [mountvirtfs] Mount /dev in tmpfs [mountvirtfs] Copying device nodes to /dev [rcS] Starting DEBUG Interface [mountall] Mounting local filesystems... mount: mounting LABEL=RECORD on /hdd failed: No such file or directory Cleaning /tmp /var/run /var/lock. Hostname: ufs910. Starting automounter: /media/usb. [rcS] Starting telnetd with autologin [rcS] Init stmfb (LOAD 9) [rcS] Loading modules [rcS] Load video firmware (LOAD 8) [rcS] Load audio firmware (LOAD 7) [rcS] Init embx (LOAD 6) [rcS] Init AVS (LOAD 5) [rcS] Init player 191 (LOAD 4) insmod: error inserting '/lib/modules/ksound.ko': -1 Invalid module format [rcS] Init frontend and CI insmod: error inserting '/lib/modules/pti.ko': -1 Unknown symbol in module [rcS] Simple pti [rcS] Init player2 (LOAD 3) insmod: error inserting '/lib/modules/player2.ko': -1 Unknown symbol in module insmod: error inserting '/lib/modules/sth264pp.ko': -1 Unknown symbol in module insmod: error inserting '/lib/modules/stmalloc.ko': -1 Unknown symbol in module insmod: error inserting '/lib/modules/exportfs.ko': -1 Invalid module format [showiframe] showSinglePic /boot/bootlogo.mvi insmod: error inserting '/lib/modules/ntfs.ko': -1 Device or resource busy [showiframe] VIDEO_SELECT_SOURCE MEMORY (Success) [showiframe] VIDEO_PLAY (No such device) [showiframe] VIDEO_CONTINUE: (No such device) [showiframe] VIDEO_CLEAR_BUFFER: (Invalid argument) [rcS] Init frontpanel (LOAD 2) [rcS] Boxtype: 1W [rcS] Init remote control [evremote2] Model: 'ufs910' [evremote2] vBoxType: 1 (ufs910) [evremote2] Input device name: "TDT RC event driver" [evremote2] Remote selected: Kathrein UFS910 (1W) RemoteControl [evremote2] RemoteControl Map: Keyname Keyword KeyCode -------------------------------------- MUTE - 0D - 113 POWER - 0C - 116 1 - 01 - 2 2 - 02 - 3 3 - 03 - 4 4 - 04 - 5 5 - 05 - 6 6 - 06 - 7 7 - 07 - 8 8 - 08 - 9 9 - 09 - 10 MENU - 54 - 139 0 - 00 - 11 TEXT - 3C - 388 RED - 6D - 398 GREEN - 6E - 399 YELLOW - 6F - 400 BLUE - 70 - 401 VOLUMEUP - 10 - 115 INFO - 0F - 358 CHANNELUP - 1E - 402 VOLUMEDOWN - 11 - 114 UP - 58 - 103 CHANNELDOWN - 1F - 403 LEFT - 5A - 105 OK - 5C - 352 RIGHT - 5B - 106 EXIT - 55 - 174 DOWN - 59 - 108 EPG - 4C - 365 REWIND - 21 - 168 PLAY - 38 - 207 FASTFORWARD - 20 - 208 PAUSE - 39 - 119 RECORD - 37 - 167 STOP - 31 - 128 VFORMAT_FRONT - 4A - 227 MENU_FRONT - 49 - 139 EXIT_FRONT - 4B - 174 STANDBY_FRONT - 48 - 116 OPTIONS_FRONT - 47 - 138 LMUTE - 8D - 113 LSTANDBY - 8C - 116 L1 - 81 - 2 L2 - 82 - 3 L3 - 83 - 4 L4 - 84 - 5 L5 - 85 - 6 L6 - 86 - 7 L7 - 87 - 8 L8 - 88 - 9 L9 - 89 - 10 LMENU - D4 - 139 L0 - 80 - 11 LTEXT - BC - 388 LRED - ED - 398 LGREEN - EE - 399 LYELLOW - EF - 400 LBLUE - F0 - 401 LVOLUMEUP - 90 - 115 LINFO - 8F - 358 LCHANNELUP - 9E - 402 LVOLUMEDOWN - 91 - 114 LUP - D8 - 103 LCHANNELDOWN - 9F - 403 LLEFT - DA - 105 LOK - DC - 352 LRIGHT - DB - 106 LEXIT - D5 - 174 LDOWN - D9 - 108 LEPG - CC - 365 LREWIND - A1 - 168 LPLAY - B8 - 207 LFASTFORWARD - A0 - 208 LPAUSE - B9 - 119 LRECORD - B7 - 167 LSTOP - B1 - 128 -------------------------------------- [evremote2] Supports Long KeyPress: yes [evremote2 ufs910_1w] Setting new flags [evremote2] Using period = 106 delay = 20 Deconfiguring network interfaces... ifdown: interface lo not configured ifdown: interface eth0 not configured ifdown: interface eth1 not configured ifdown: interface wlan0 not configured done. [rcS] Starting DHCP Starting DHCP client: udhcpcudhcpc: started, v1.34.1 udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover failed... udhcpc: no lease, failing already running. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... ip: RTNETLINK answers: File exists udhcpc: started, v1.34.1 udhcpc: broadcasting discover udhcpc: broadcasting discover udhcpc: broadcasting discover failed... udhcpc: no lease, failing ip: SIOCGIFFLAGS: No such device ip: SIOCGIFFLAGS: No such device done. [rcS] Init WLAN: None. [rcS] Do extras (LOAD 1) [rcS] No inadyn [rcS] No OpenSSH [rcS] Try and synchronise time [rcS] Set internet time [rcS] Init portmap & ftp ntpd: bad address '0.europe.pool.ntp.org' Starting portmap daemon.... Starting FTP server: vsftpd. [rcS] Loading Enigma2 Unable to open framebuffer: No such device [rcS] Starting Enigma2 -> ntpd: bad address '0.europe.pool.ntp.org' PYTHONPATH: /usr/lib/enigma2/python DVB_API_VERSION 5 DVB_API_VERSION_MINOR 3 ENIGMA_DEBUG_LVL=3 /dev/fb0: No such device [gFBDC] no framebuffer available Segmentation fault [rcS] E2 ended <- return value: 139 usage: not implemented General usage: fp_control argument [optarg1] [optarg2] -i --setIcon Args: icon on Set an icon on or off Options marked * should be the only calling argument. Time and date arguments must be in local time. [rcS] ERROR INIT: Switching to runlevel: 6 INIT: Sending processes configured via /etc/inittab the TERM signal Sending all processes the TERM signal...done. Sending all processes the KILL signal...done. Deactivating swap...umount: tmpfs busy - remounted read-only done. Unmounting local filesystems...umount: tmpfs busy - remounted read-only done. Rebooting...
Hi!
UFS 910 E2 flash minimal build ok, but NO USB STICK on the VFD the second reboot:
USB-stick prepare in Instructions, all files copied in /kathrein/ufs910/.Code:16515072 bytes read ............................................................................................................................................................................................................................................................Erased 252 sectors Copy to Flash... ..............................................................................................................................done maxiU-Boot 1.3.1 (May 19 2010 - 23:05:16) - by SoLaLa DRAM: 64 MB Flash: 16 MB In: serial Out: serial Err: serial selected Image to start: ----Flash---- no originalsoft detected, trying bootargs_0, if empty trying e2-bootargs... Hit any key to stop autoboot: 0 ## Booting image at a0040000 ... Image Name: Linux-2.6.32.71_stm24_0217 Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 4308270 Bytes = 4.1 MB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.100.2:192.168.100.8:192.168.100.10:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00 init=/bin/devinit - 0x00000000 - 0 ... INIT: version booting ------------------------------------------------------------ deploy.sh version V0.13 (version for Kathrein UFS910) ------------------------------------------------------------ <- Mounting USB stick -> mount: mounting /dev/sdb1 on /instsrc failed: No such device or address mount: mounting /dev/sdb on /instsrc failed: No such device or address mount: mounting /dev/sdb1 on /instsrc failed: No such device or address mount: mounting /dev/sdb on /instsrc failed: No such device or address mount: mounting /dev/sdb1 on /instsrc failed: No such device or address mount: mounting /dev/sdb on /instsrc failed: No such device or address mount: mounting /dev/sdb1 on /instsrc failed: No such device or address mount: mounting /dev/sdb on /instsrc failed: No such device or address mount: mounting /dev/sdb1 on /instsrc failed: No such device or address mount: mounting /dev/sdb on /instsrc failed: No such device or address mount: mounting /dev/sdb1 on /instsrc failed: No such device or address mount: mounting /dev/sdb on /instsrc failed: No such device or address INIT: Entering runlevel: 3 INIT: no more processes left in this runlevel
Needed mini-uboot in flash? Dont work mini-uboot, AAF Recovery 1.9 says: Done mini install and activate and next boot only maxi-uboot...
After added pen prepared mini1, mini2:
VFD: 9 MOUNT USB, 7 FORMAT ERROR, SET BOTTARGS, ERROR KRNL FLASHCode:INIT: version booting ------------------------------------------------------------ deploy.sh version V0.13 (version for Kathrein UFS910) ------------------------------------------------------------ <- Mounting USB stick -> ./deploy.sh: line 1: can't open /instsrc/Image_Installer.ini: no such file grep: /instsrc/Image_Installer.ini: No such file or directory grep: /instsrc/Image_Installer.ini: No such file or directory grep: /instsrc/Image_Installer.ini: No such file or directory grep: /instsrc/Image_Installer.ini: No such file or directory ------------------------------------- Using the following settings: partition : createmini : keepsettings : keepbootargs : usejfs : useext2e2 : usbhdd : format : update : ------------------------------------- sh: 1: unknown operand <- Formatting HDD (rootfs) -> mke2fs 1.46.4 (18-Aug-2021) /dev/sda1 contains a vfat file system labelled 'X' Creating filesystem with 251896 4k blocks and 62976 inodes Filesystem UUID: 69f0b360-bfde-11d3-bf55-001dec00d6ba Superblock backups stored on blocks: 32768, 98304, 163840, 229376 Allocating group tables: done Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done sh: 1: unknown operand <- Skipping installation of root file system -> mount: mounting /dev/sda3 on /mnt failed: No such device or address umount: can't unmount /mnt: Invalid argument -rwxr-xr-x 1 0 0 15712 Mar 2 2022 fw_printenv lrwxrwxrwx 1 0 0 21 Mar 2 2022 fw_setenv -> /usr/sbin/fw_printenv <- Flashing U-Boot args: Warning: Bad CRC, using default environment Can't open /dev/mtd7: Permission denied Error: can't write fw_env to flash Warning: Bad CRC, using default environment Can't open /dev/mtd7: Permission denied Error: can't write fw_env to flash Warning: Bad CRC, using default environment Can't open /dev/mtd7: Permission denied Error: can't write fw_env to flash Warning: Bad CRC, using default environment Can't open /dev/mtd7: Permission denied Error: can't write fw_env to flash done -> INIT: Entering runlevel: 3 INIT: no more processes left in this runlevel
But the flash build, not usb...
Image_Installer.ini working in flash image?:
But createmini disabled = 0Code:# createmini: This setting will only have effect in combination with partition=1 # 0 only creates system partition, swap partition and record partition # 1 additionally creates 4 partitions MINI1 to MINI4 at the end of the disk ....................... [parameter] partition=0 createmini=0 keepsettings=1 keepbootargs=1
Geändert von turulbird (05.03.2022 um 18:57 Uhr)
Hello Turulbird,
Some time ago I added the ufsinstaller for the UFS910, deriving it from the UFS922. As with the UFS922, the ufsinstaller assumes the image is running off the internal hard disk. As the UFS910 has not got one as standard, the best way is to build and USB image and use that in the classic way with the maxi-uboot you already have on your box.
Adding an internal hard disk to the UFS910 is not difficult. You have to solder in 4 10nF SMD capacitors and the SATA data connector. If you use a 2.5 inch hard drive, you only need +5 Volt and the power supply in the UFS910 has enough power to operate such a drive.
If an internal hard drive is installed, use the directions regarding the UFS922 and build a flash image. I have running E2 successfully on both 14W and 1W standby models.
Regards,
Audioniek.
Receivers: Rebox: RE-4000, 8000, 9000, 2200, 2210, 2220, 4200, 4210, 4220, 8220, 8500, SAB Unix Triple, Golden Media Spark TripleX, Amiko Alien 2+, Sogno Spark Revolution, Kathrein UFS910(1 & 14W)/912/913/922(CX24116 & AVL2108 tuners), Vizyon revolution 820HD PVR, AB IPBox 91HD/9000HD/9000HD rev.2, Xsarius Alpha HD10, nBox BKSA/BSLA/BXZB/BZZB, Vitamin HD 5000
Sats: Astra 1, 2 & 3, Hotbird
Main activity: building my own E2 images for Fortis receivers
Hi!
Thank you, so much is not important, there is Vu+ Solo SE too.
I can not start Neutrino flash image and E2 usb image.
2022. neutrino usb images working:
https://www.dropbox.com/sh/t6hd0hi19...AjiML7Tsa?dl=0
Thanks!
Geändert von turulbird (05.03.2022 um 23:01 Uhr)